raspberry pi
Projects with this topic
-
PiVR has been developed to track a variety of animals in real time and present them with light stimuli. Manual can be found at www.PiVR.org, scientific publication at https://doi.org/10.1371/journal.pbio.3000712
Updated -
Python OctoPrint controller for keypad connected to the RaspberryPi GPIOs
Updated -
Mistborn is your own virtual private cloud platform and WebUI that manages self hosted services, and secures them with firewall, Wireguard VPN w/ PiHole-DNSCrypt, and IP filtering. Optional SIEM+IDS. Supports 2FA, Nextcloud, Jitsi, Home Assistant, +
Updated -
Set of playbooks, configurations, deployment and scripts for my Raspberry Pi setup at home as HomeLab
UpdatedUpdated -
Projetc by Python and QTcreator , runnig by RaspbaerryPI
Updated -
Web UI for crontab based control of N-level relays (aka relay-pi). Supports GPIO-connected devices and remote devices with Tasmota firmware.
Updated -
Web interface for Enviro and Enviro+ sensor board plugged into a Raspberry Pi.
Measure air quality (pollutant gases and particulates), temperature, humidity, pressure, light and noise.
Updated -
Raspberry Pi for home automation. Runs daemons for hardware access and communication on a network of Pi's. Plus a desktop (Qt multi-platform but tested on linux only) front-end for managing all your Pi's and keeping track what they do.
Updated -
-
A Raspberry Pi based test utility for the TS4631 SteamVR IC.
Updated -
Distributed home servers using Ansible
Updated -
-
-
C/C++ GNU/Linux kernel module to drive via SPI a MAX7219 controlled chained array of 8x8 led matrices. Currently, only ARMv7 is tested (Olimexino Lime A10 and Raspberry Pi B+ v1.2)
Updated -
-
Go module for working with Raspberry Pi boot configuration
Updated -
We are providing Ready To Use solution for home automation based on OpenHAB or Home Assistant projects. Our hardware solution is based on Raspberry Pi as central system and Arduino boards to control relays outputs (lights, shutters, sockets) and collect data from various inputs (wall buttons, motion, temp & humidity sensors, etc.).
Updated -
-
This is a project called "PlatformBot" for Istanbul Zaim University AprilLand AGM Team's drone project.
Updated -
Customized Raspberry images with etherLab preinstalled
Updated