R

RaspberryPi4

A setup script and accompanying files to set up an overlay root filesystem on a Debian like OS on a RaspberryPi or similar computer. But it even works on a standard Debian system. Overlay root means the underlying files system (usually an SD card on a RaspberryPi) is mounted read only and all changes happen in a ram disk overlay. That way, you can power off your Pi (unplug power cable) any time without risking file system corruption on the SD card.

syncosync - secure peer to peer backup synchronization

syncosync is a software for running a backup appliance, normally a Raspberry Pi4 with a USB3 connected hard disk drive. The main function is to receive backups from other computers on the local network and synchronize these backups to a similar system at a different location. The device on the other side of the network does the same, so two devices on two sides of the network are always in sync. You don't lose anything if something happens at either end

Copyright (C) 2021, 2022 syncosync.org

Dockerized librespot for Spotify music streaming.

Ansible playbook to install BSF tooling required for an OLIP deployment.

⚠ This repo will eventually get merged in olip-deploy.

A playbook to install OLIP platform on Linux.

BSF final tooling for Ideascubes deployment in production.

⚠ This repo will eventually get merged in olip-deploy.

Raspberry Pi 4 insert for 1U 19' rack with fan shroud. Compatible with " 1U Raspberry Pi Rack with Moduler trays" by Robert (@Robert_28442 at Printables)

Porting the operating system hhuOS from x86 to the 64bit System-on-a-Chip of the Raspberry Pi4 (Cortex-A72)

GLES31/Compute shader test (mostly for RPi4/VideoCore VI (VC6) evaluation, but may work on other hardware, like Jetson Nano or Asus TinkerBoard).