... | ... | @@ -17,4 +17,15 @@ During installation make sure to install USBPcap. This is the driver responsible |
|
|
**Note:** During the installation of wireshark make sure to install USBPcap. This is the driver responsible for sniffing the USB packets sent.
|
|
|
|
|
|
|
|
|
**Getting Good Data**
|
|
|
---
|
|
|
Getting good data:
|
|
|
During this process make sure to only have only ONE RGB software that is controlling the device, having SignalRGB AND the company's software talking to the device or SDKs like wallpaper engine, ASUS Sync etc. running will make the data captured significantly harder or impossible to decode. The less noise generated during this process the better. If recording a mouse, Try to use a second mouse to control the computer if possible as mouse movement can send over a 1000 packets a second that need to be filtered out.
|
|
|
|
|
|
The data you're trying to record is:
|
|
|
- The Device’s Startup / Initialization
|
|
|
- Changing modes (going into Static/Custom mode)
|
|
|
- Changing the Static mode
|
|
|
- DPI / LCD screens if applicable on your device
|
|
|
- The Device going back to hardware mode again if applicable.
|
|
|
|