Skip nearest high airspace, not just hide it (in proximity widget)
From mail:
Problem:
The attached png contains 2 screenshots. The left one was displayed while flying. In this situation no airspace info of CTR Mannheim was displayed in the "airspace proximity" widget even it should (aisp. within reach of settings). XContest airspace data of CTR Mannheim is fine.
AC CTR AN CTR Mannheim SB 0,255,0 AH 2000ft AMSL AL GND DP 49:31:38.00 N 008:22:54.00 E DP 49:31:05.00 N 008:39:06.00 E DP 49:25:05.00 N 008:38:36.00 E DP 49:25:38.00 N 008:22:28.00 E
Reason why:
In the "airspace proximity" widget I had set the vertical airspace to be displayed for the flatlands to <3000 m (i.e. roughly FL100, which is limit for VFR), so 1 & 2 in the right screenshot are not visible. XContest airspace data also contains FIS data. In the mentioned example my position was exactly at the border of two FIS (3050 mSTD - 7470 mSTD, Long 119.150 MHz / 118.950 MHz). Below the one, adjacent to the other FIS (due to the filter) no LR info was output. CTR MA is in "3rd place" (after 1 & 2) in the list to be displayed, so it was not displayed.
Suggestion:
In the widget "airspace proximity" it might be useful to display the horizontal airspace depending on the vertical LR limit set in the settings.