[release-1.4] Add an unit that automatically renews Kyverno TLS certificates

What does this MR do and why?

This MR adds a kyverno-tls-renewal cronjob unit that runs every 12 hours (the same pattern that Kyverno has) that checks the age of the CA and leaf secrets for both the admission and cleanup controllers, and deletes them if they're within 20 days of expiry, in order not to interfere with the 15 days default that Kyverno has. If the CA needs rotating, both CA and leaf are deleted together to avoid orphaning the leaf against a stale CA. The script is also restarting the corresponding controller's pods, in order to pick up the new certs.

The initial script that I wrote was refined by Claude Sonnet 4.6, in order to improve readability.

Related reference(s)

Closes #4286 (closed)

Test coverage

Tested in a release-1.4 dev cluster with the following scenarios:

1. Confirmed the cronjob is a no-op when certs are fresh, causing no restarts/no secrets deletion.
2. Forced rotation (by temporarily lowering the age thresholds) and confirmed both CA+leaf and leaf-only rotation paths correctly regenerate secrets and restart the right pods

CI configuration

Below you can choose test deployment variants to run in this MR's CI.

Click to open to CI configuration

Legend:

Icon	Meaning	Available values
☁️	Infra Provider	capd, capo, capm3
🚀	Bootstrap Provider	kubeadm (alias kadm), rke2, okd, ck8s
🐧	Node OS	ubuntu, suse, na, leapmicro
🛠️	Deployment Options	Deployment option list and description
🎬	Pipeline Scenarios	Available scenario list and description
🟢	Enabled units	Any available units name, by default apply to management and workload cluster. Can be prefixed by mgmt: or wkld: to be applied only to a specific cluster type
🔴	Disabled units	Any available units name, by default apply to management and workload cluster. Can be prefixed by mgmt: or wkld: to be applied only to a specific cluster type
🏗️	Target platform	Can be used to select specific deployment environment Available platform list and description
⚡	Pipeline control	autorun, manual or blocking. Can be used to override global config and start a deployment pipeline the required way

• 🎬 preview ☁️ capd 🚀 kadm 🐧 ubuntu

• 🎬 preview ☁️ capo 🚀 rke2 🐧 suse

• 🎬 preview ☁️ capm3 🚀 rke2 🐧 ubuntu

• ☁️ capd 🚀 kadm 🛠️ light-deploy 🐧 ubuntu

• ☁️ capd 🚀 rke2 🛠️ light-deploy 🐧 suse

• ☁️ capo 🚀 rke2 🐧 suse

• ☁️ capo 🚀 rke2 🐧 leapmicro

• ☁️ capo 🚀 kadm 🐧 ubuntu

• ☁️ capo 🚀 kadm 🐧 ubuntu 🟢 neuvector,mgmt:harbor

• ☁️ capo 🚀 rke2 🎬 rolling-update 🛠️ ha 🐧 ubuntu

• ☁️ capo 🚀 kadm 🎬 wkld-k8s-upgrade 🐧 ubuntu

• ☁️ capo 🚀 rke2 🎬 rolling-update-no-wkld 🛠️ ha 🐧 suse

• ☁️ capo 🚀 rke2 🎬 sylva-upgrade 🛠️ ha 🐧 ubuntu

• ☁️ capo 🚀 rke2 🎬 sylva-upgrade-from-1.6.x 🛠️ ha,misc 🐧 ubuntu

• ☁️ capo 🚀 rke2 🛠️ ha,misc 🐧 ubuntu

• ☁️ capo 🚀 rke2 🛠️ misc 🐧 ubuntu 🟢 mgmt:harbor 🔴 neuvector

• ☁️ capo 🚀 rke2 🛠️ ha,misc,openbao 🐧 suse

• ☁️ capo 🚀 rke2 🐧 suse 🎬 upgrade-from-prev-tag

• ☁️ capm3 🚀 rke2 🐧 suse

• ☁️ capm3 🚀 kadm 🐧 ubuntu

• ☁️ capm3 🚀 ck8s 🐧 ubuntu

• ☁️ capm3 🚀 kadm 🎬 rolling-update-no-wkld 🛠️ ha,misc 🐧 ubuntu

• ☁️ capm3 🚀 rke2 🎬 wkld-k8s-upgrade 🛠️ ha 🐧 suse

• ☁️ capm3 🚀 kadm 🎬 rolling-update 🛠️ ha 🐧 ubuntu

• ☁️ capm3 🚀 rke2 🎬 upgrade-from-prev-release-branch 🛠️ ha 🐧 suse

• ☁️ capm3 🚀 rke2 🛠️ misc,ha 🐧 suse

• ☁️ capm3 🚀 rke2 🎬 sylva-upgrade 🛠️ ha,misc 🐧 suse

• ☁️ capm3 🚀 kadm 🎬 rolling-update 🛠️ ha 🐧 suse

• ☁️ capm3 🚀 ck8s 🎬 rolling-update 🛠️ ha 🐧 ubuntu

• ☁️ capm3 🚀 rke2|okd 🎬 no-update 🐧 ubuntu|na

• ☁️ capm3 🚀 rke2 🐧 suse 🎬 upgrade-from-release-1.5

• ☁️ capm3 🚀 rke2 🐧 suse 🎬 upgrade-to-main

Global config for deployment pipelines

• autorun pipelines
• allow failure on pipelines
• record sylvactl events

Notes:

• Enabling autorun will make deployment pipelines to be run automatically without human interaction
• Disabling allow failure will make deployment pipelines mandatory for pipeline success.
• if both autorun and allow failure are disabled, deployment pipelines will need manual triggering but will be blocking the pipeline

Be aware: after configuration change, pipeline is not triggered automatically. Please run it manually (by clicking the run pipeline button in Pipelines tab) or push new code.