arm64: dts: qcom: sm8250-oneplus-instantnoodlep: Restore Wi-Fi / BT functionality
The Wi-Fi and BT chip on the Oneplus 8 Pro (instantnoodlep) stopped working around v6.11 as reported on postmarketOS's Matrix room.
I've personally never tried anything other than v6.11 on my Oneplus 8 Pro, as I've never used postmarketOS on this device before.
Long story short, I've noticed that the Wi-Fi and BT module were broken, so I've fixed it.
This MR makes the chip work again, and restores the Wi-Fi and BT functionality on instantnoodlep:
# dmesg | grep ath11k
[ 11.524348] ath11k_pci 0000:01:00.0: Adding to iommu group 13
[ 11.524578] ath11k_pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x604fffff 64bit]: assigned
[ 11.524642] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 11.524983] ath11k_pci 0000:01:00.0: MSI vectors: 32
[ 11.525005] ath11k_pci 0000:01:00.0: qca6390 hw2.0
[ 12.796173] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
[ 12.796205] ath11k_pci 0000:01:00.0: fw_version 0x10121492 fw_build_timestamp 2021-11-04 11:23 fw_build_id
# dmesg | grep -i bluetooth
[ 11.290281] Bluetooth: Core ver 2.22
[ 11.290306] NET: Registered PF_BLUETOOTH protocol family
[ 11.290308] Bluetooth: HCI device and connection manager initialized
[ 11.290312] Bluetooth: HCI socket layer initialized
[ 11.290314] Bluetooth: L2CAP socket layer initialized
[ 11.290321] Bluetooth: SCO socket layer initialized
[ 11.298555] Bluetooth: HCI UART driver ver 2.3
[ 11.298561] Bluetooth: HCI UART protocol H4 registered
[ 11.298672] Bluetooth: HCI UART protocol LL registered
[ 11.298781] Bluetooth: HCI UART protocol Broadcom registered
[ 11.298796] Bluetooth: HCI UART protocol QCA registered
[ 11.362333] Bluetooth: hci0: setting up ROME/QCA6390
[ 11.435446] Bluetooth: Received HCI_IBS_WAKE_ACK in tx state 0
[ 12.614347] Bluetooth: hci0: QCA Product ID :0x00000010
[ 12.614356] Bluetooth: hci0: QCA SOC Version :0x400a0200
[ 12.614360] Bluetooth: hci0: QCA ROM Version :0x00000200
[ 12.614363] Bluetooth: hci0: QCA Patch Version:0x00000d2b
[ 12.614368] Bluetooth: hci0: QCA controller version 0x02000200
[ 12.614373] Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
[ 13.517437] Bluetooth: hci0: QCA Downloading qca/htnv20.bin
[ 13.841537] Bluetooth: hci0: QCA setup on UART is completed