Skip to content

Changes

Page history
Update Digital interface authored by Dejan Priversek's avatar Dejan Priversek
Show whitespace changes
Inline Side-by-side
Features-and-Specifications/Digital-interface.md
View page @ 7239aae7
...@@ -40,8 +40,8 @@ Digital sequence can be defined in a file. The samples in the file are JSON form ...@@ -40,8 +40,8 @@ Digital sequence can be defined in a file. The samples in the file are JSON form
The file upload function is available on the *Setup* tab in the ScopeFun software. This tab also allows adjusting the output HIGH voltage (from 1.25 V to 3.3 V) and the output frequency of the pattern generator. The file upload function is available on the *Setup* tab in the ScopeFun software. This tab also allows adjusting the output HIGH voltage (from 1.25 V to 3.3 V) and the output frequency of the pattern generator.
![image](uploads/6e59ee3d673633ebc6efb9d667271679/image.png) ![image](uploads/254c2c8774e9218544deff5f682b99f9/image.png)
The *Pattern* tab can be used to configure the digital GPIO interface. For each digital channel, it is possible to set the signal direction `IN/OUT` and value `'0'/'1'/'X'`. To override one or more channels with a logic HIGH or LOW, set the value(s) to `'1'` or `'0'`, respectively. Value `'X'` will instruct ScopeFun to output the pattern from the uploaded file. The *Pattern* tab can be used to configure the digital GPIO interface. For each digital channel, it is possible to set the signal direction `IN/OUT` and value `'0'/'1'/'X'`. To override one or more channels with a logic HIGH or LOW, set the value(s) to `'1'` or `'0'`, respectively. Value `'X'` will instruct ScopeFun to output the pattern from the uploaded file.
![image](uploads/740554c09e279e34365aba1ec77c49da/image.png) ![image](uploads/6e59ee3d673633ebc6efb9d667271679/image.png)
\ No newline at end of file \ No newline at end of file