Support for Plustek OpticSlim 1180
I bought this A3 scanner a few years ago because it was the cheapest and I had hope that support would come someday on Linux
Is it possible to add a basic support for Plustek OpticSlim 1180?
This is the output from sudo sane-find-scanner -v -v
<device descriptor of 0x07b3/0x140b at 006:003 (PLUSTEK INC USB2.0 SCANNER)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x07B3
idProduct 0x140B
bcdDevice 7.02
iManufacturer 10 (PLUSTEK INC)
iProduct 11 (USB2.0 SCANNER)
iSerialNumber 12 (1)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 10 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GLxxx ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
<This USB chip looks like a GL128 (result from sane-backends 1.2.1)>
found possible USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x140b [USB2.0 SCANNER], chip=GL128) at libusb:006:003
Edited by Efraim Kaov