Ouya no longer allows connection, no visual output
Created by: rendeko
Using the following commands to build:
git checkout device-ouya-ouya
./pmbootstrap.py zap -hc -p -m
./pmbootstrap.py init
./pmbootstrap.py checksum device-ouya-ouya
./pmbootstrap.py build -i device-ouya-ouya
./pmbootstrap.py checksum linux-ouya-ouya
./pmbootstrap.py kconfig_check
./pmbootstrap.py build linux-ouya-ouya
./pmbootstrap.py install --no-fde
./pmbootstrap.py flasher boot
Screen turns black as if it's occupied, but nothing displays. SSH rejects connection immediately, as does telnet.
pmbootstrap log:
(012694) [15:35:03] Calculate depends of packages ['device-ouya-ouya'], arch: armhf
(012694) [15:35:04] Calculate depends of packages ['postmarketos-mkinitfs'], arch: armhf
(012694) [15:35:05] Calculate depends of packages [], arch: armhf
(012694) [15:35:05] (rootfs_ouya-ouya) mkinitfs ouya-ouya
(012694) [15:35:05] (rootfs_ouya-ouya) % mkinitfs -o /boot/initramfs-ouya-ouya 3.1.10-cyanogenmod
WARNING: deviceinfo_modules_initfs is empty!
==> initramfs: creating /boot/initramfs-ouya-ouya
modprobe: WARNING: Module drm_kms_helper not found in directory /lib/modules/3.1.10-cyanogenmod
modprobe: WARNING: Module drm not found in directory /lib/modules/3.1.10-cyanogenmod
modprobe: WARNING: Module dm_crypt not found in directory /lib/modules/3.1.10-cyanogenmod
modprobe: WARNING: Module ext4 not found in directory /lib/modules/3.1.10-cyanogenmod
==> initramfs: creating boot.img
==> initramfs: creating /boot/initramfs-ouya-ouya-extra
(012694) [15:35:10] Check kconfig: /home/me/pmbootstrap/aports/device/linux-ouya-ouya/config-ouya-ouya.armhf
(012694) [15:35:10] (native) boot ouya-ouya kernel
(012694) [15:35:10] Calculate depends of packages ['android-tools'], arch: x86_64
(012694) [15:35:11] (native) install android-tools
(012694) [15:35:11] (native) % apk --no-progress add -u android-tools pcre
(1/2) Installing pcre (8.41-r1)
(2/2) Installing android-tools (7.0.0_p24-r2)
Executing busybox-1.27.2-r6.trigger
OK: 516 MiB in 148 packages
(012694) [15:35:11] % sudo mkdir -p /home/me/.local/var/pmbootstrap/chroot_native/sys/bus/usb/devices/
(012694) [15:35:12] % sudo mount --bind /sys/bus/usb/devices/ /home/me/.local/var/pmbootstrap/chroot_native/sys/bus/usb/devices/
(012694) [15:35:12] % sudo mkdir -p /home/me/.local/var/pmbootstrap/chroot_native/sys/dev/
(012694) [15:35:12] % sudo mount --bind /sys/dev/ /home/me/.local/var/pmbootstrap/chroot_native/sys/dev/
(012694) [15:35:12] % sudo mkdir -p /home/me/.local/var/pmbootstrap/chroot_native/sys/devices/
(012694) [15:35:12] % sudo mount --bind /sys/devices/ /home/me/.local/var/pmbootstrap/chroot_native/sys/devices/
(012694) [15:35:12] % sudo mkdir -p /home/me/.local/var/pmbootstrap/chroot_native/dev/bus/usb/
(012694) [15:35:12] % sudo mount --bind /dev/bus/usb/ /home/me/.local/var/pmbootstrap/chroot_native/dev/bus/usb/
(012694) [15:35:12] (native) % fastboot -i '' -c '' boot /mnt/rootfs_ouya-ouya/boot/boot.img-ouya-ouya
(012694) [15:35:12] *** output passed to pmbootstrap stdout, not to this log ***
(012694) [15:35:13] You will get an IP automatically assigned to your USB interface shortly.
(012694) [15:35:13] Then you can connect to your device using ssh after pmOS has booted:
(012694) [15:35:13] ssh user@172.16.42.1
(012694) [15:35:13] NOTE: If you enabled full disk encryption, you should make sure that osk-sdl has been properly configured for your device
(012694) [15:35:13] Done