Touchscreen does not work on Xiaomi Mi A2 lite(xiaomi-daisy).
Describe your issue
What's the expected behaviour?
Touchscreen is working
What's the current behaviour?
Touchscreen is not working. I have to use mouse connected via usb.
How to reproduce your issue?
Follow official guide and install pmOS.
What device are you using?
xiaomi-daisy
On what postmarketOS version did you encounter the issue?
-
edge ( master
branch) -
v23.06
-
v22.12
(Supported until 2023-07-06) -
I confirm that the issue still is present after running sudo apk upgrade -a
On what environment did you encounter the issue?
Environments
-
GNOME Shell on Mobile -
Phosh -
Plasma Mobile -
Sxmo (Wayland/Sway) Please post the output of sxmo_version.sh
-
Other: Please fill out
How did you get postmarketOS image?
-
from https://images.postmarketos.org -
I built it using pmbootstrap -
It was preinstalled on my device
What's the build date of the image? (in yyyy-mm-dd format)
Additional information
I have encountered this #1914 (closed) issue while executing last command "sudo fastboot format system" from guide. I have not executed alternative command in #1914 (closed) issue because everything booted up.
Update: I have executed "sudo fastboot erase system" now, but nothing changed.
It says this in dmesg: [ 3.714460] edt_ft5x06 2-0038: touchscreen probe failed
dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.5.2-postmarketos-qcom-msm8953 (pmos@build) (aarch64-alpine-linux-musl-gcc (Alpine 13.1.1_git20230722) 13.1.1 20230722, GNU ld (GNU Binutils) 2.40) #1-postmarketos-qcom-msm8953 SMP PREEMPT Mon Oct 16 19:22:41 UTC
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Xiaomi Mi A2 Lite
[ 0.000000] Malformed early option 'earlycon'
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000081800000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node zap@81800000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000081800000..0x0000000081801fff (8 KiB) nomap non-reusable zap@81800000
[ 0.000000] OF: reserved mem: 0x0000000084a00000..0x00000000862fffff (25600 KiB) nomap non-reusable qseecom@84a00000
[ 0.000000] OF: reserved mem: 0x0000000086300000..0x00000000863fffff (1024 KiB) nomap non-reusable smem@86300000
[ 0.000000] OF: reserved mem: 0x0000000086400000..0x00000000867fffff (4096 KiB) nomap non-reusable reserved@86400000
[ 0.000000] OF: reserved mem: 0x0000000086c00000..0x000000008d5fffff (108544 KiB) nomap non-reusable mpss@86c00000
[ 0.000000] OF: reserved mem: 0x000000008d600000..0x000000008e7fffff (18432 KiB) nomap non-reusable adsp@8d600000
[ 0.000000] OF: reserved mem: 0x000000008e800000..0x000000008eefffff (7168 KiB) nomap non-reusable wcnss@8e800000
[ 0.000000] OF: reserved mem: 0x0000000090000000..0x0000000090000fff (4 KiB) nomap non-reusable dfps-data@90000000
[ 0.000000] OF: reserved mem: 0x0000000090001000..0x00000000913fffff (20476 KiB) nomap non-reusable cont-splash@90001000
[ 0.000000] OF: reserved mem: 0x0000000091400000..0x0000000091afffff (7168 KiB) nomap non-reusable venus@91400000
[ 0.000000] OF: reserved mem: 0x0000000092000000..0x00000000920fffff (1024 KiB) nomap non-reusable mba@92000000
[ 0.000000] OF: reserved mem: 0x000000009ff00000..0x000000009fffffff (1024 KiB) map non-reusable ramoops@9ff00000
[ 0.000000] OF: reserved mem: 0x00000000f2d00000..0x00000000f2e7ffff (1536 KiB) nomap non-reusable rmtfs@f2d00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000010000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xff86b9c0-0xff86dfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000010000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000817fffff]
[ 0.000000] node 0: [mem 0x0000000081800000-0x0000000081801fff]
[ 0.000000] node 0: [mem 0x0000000081802000-0x00000000849fffff]
[ 0.000000] node 0: [mem 0x0000000084a00000-0x00000000867fffff]
[ 0.000000] node 0: [mem 0x0000000086800000-0x0000000086bfffff]
[ 0.000000] node 0: [mem 0x0000000086c00000-0x000000008eefffff]
[ 0.000000] node 0: [mem 0x000000008ef00000-0x000000008fffffff]
[ 0.000000] node 0: [mem 0x0000000090000000-0x0000000091afffff]
[ 0.000000] node 0: [mem 0x0000000091b00000-0x0000000091ffffff]
[ 0.000000] node 0: [mem 0x0000000092000000-0x00000000920fffff]
[ 0.000000] node 0: [mem 0x0000000092100000-0x00000000f2cfffff]
[ 0.000000] node 0: [mem 0x00000000f2d00000-0x00000000f2e7ffff]
[ 0.000000] node 0: [mem 0x00000000f2e80000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[ 0.000000] percpu: Embedded 21 pages/cpu s48552 r8192 d29272 u86016
[ 0.000000] pcpu-alloc: s48552 r8192 d29272 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: earlycon console=ttyMSM0,115200 PMOS_NO_OUTPUT_REDIRECT pmos_boot_uuid=ed4696e9-a645-410f-9bbc-3b26b526313e pmos_root_uuid=4f447406-78ee-4f55-875c-81a4c091865a
[ 0.000000] Unknown kernel command line parameters "PMOS_NO_OUTPUT_REDIRECT pmos_boot_uuid=ed4696e9-a645-410f-9bbc-3b26b526313e pmos_root_uuid=4f447406-78ee-4f55-875c-81a4c091865a", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967680
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000f5558000-0x00000000f9558000] (64MB)
[ 0.000000] Memory: 3537776K/3932160K available (11392K kernel code, 1338K rwdata, 3956K rodata, 2624K init, 445K bss, 361616K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000223] Console: colour dummy device 80x25
[ 0.000318] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000334] pid_max: default: 32768 minimum: 301
[ 0.000437] LSM: initializing lsm=capability,integrity
[ 0.000566] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000590] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003285] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003403] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003671] rcu: Hierarchical SRCU implementation.
[ 0.003676] rcu: Max phase no-delay instances is 1000.
[ 0.005356] smp: Bringing up secondary CPUs ...
[ 0.006222] Detected VIPT I-cache on CPU1
[ 0.006358] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007249] Detected VIPT I-cache on CPU2
[ 0.007343] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.008188] Detected VIPT I-cache on CPU3
[ 0.008278] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.009237] Detected VIPT I-cache on CPU4
[ 0.009356] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.010214] Detected VIPT I-cache on CPU5
[ 0.010298] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.011121] Detected VIPT I-cache on CPU6
[ 0.011208] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.012042] Detected VIPT I-cache on CPU7
[ 0.012130] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.012243] smp: Brought up 1 node, 8 CPUs
[ 0.012253] SMP: Total of 8 processors activated.
[ 0.012260] CPU features: detected: 32-bit EL0 Support
[ 0.012264] CPU features: detected: 32-bit EL1 Support
[ 0.012270] CPU features: detected: CRC32 instructions
[ 0.012399] CPU: All CPU(s) started at EL1
[ 0.012427] alternatives: applying system-wide alternatives
[ 0.015411] devtmpfs: initialized
[ 0.030867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.030891] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.031982] pinctrl core: initialized pinctrl subsystem
[ 0.033168] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.034550] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.034784] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.035081] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.035159] audit: initializing netlink subsys (disabled)
[ 0.035389] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[ 0.035949] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.035957] thermal_sys: Registered thermal governor 'step_wise'
[ 0.035961] thermal_sys: Registered thermal governor 'user_space'
[ 0.035966] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.036016] cpuidle: using governor menu
[ 0.036266] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.036515] ASID allocator initialised with 65536 entries
[ 0.036781] Serial: AMBA PL011 UART driver
[ 0.038361] printk: console [ramoops-1] enabled
[ 0.038917] pstore: Registered ramoops as persistent store backend
[ 0.038927] ramoops: using 0x100000@0x9ff00000, ecc: 0
[ 0.054110] platform 1800000.clock-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/phy@1a94400
[ 0.055182] platform 1a00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/interconnect@500000
[ 0.055357] platform 1a00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@1800000
[ 0.065889] Modules: 27776 pages in range for non-PLT usage
[ 0.065902] Modules: 519296 pages in range for PLT usage
[ 0.066818] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.066844] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.066858] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.066867] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.066879] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.066889] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.066900] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.066910] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.069548] iommu: Default domain type: Translated
[ 0.069568] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.069908] SCSI subsystem initialized
[ 0.070133] usbcore: registered new interface driver usbfs
[ 0.070189] usbcore: registered new interface driver hub
[ 0.070244] usbcore: registered new device driver usb
[ 0.070835] i2c-gpio i2c-sensors: using lines 526 (SDA) and 527 (SCL)
[ 0.072432] Advanced Linux Sound Architecture Driver Initialized.
[ 0.073660] clocksource: Switched to clocksource arch_sys_counter
[ 0.073953] VFS: Disk quotas dquot_6.6.0
[ 0.073999] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.083931] NET: Registered PF_INET protocol family
[ 0.084183] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.088284] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.088345] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.088419] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.088739] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.089888] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.090057] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.090184] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.090475] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.091003] RPC: Registered named UNIX socket transport module.
[ 0.091018] RPC: Registered udp transport module.
[ 0.091028] RPC: Registered tcp transport module.
[ 0.091036] RPC: Registered tcp-with-tls transport module.
[ 0.091046] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.091318] Unpacking initramfs...
[ 0.106252] kvm [1]: HYP mode not available
[ 0.107820] Initialise system trusted keyrings
[ 0.108123] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.108847] NFS: Registering the id_resolver key type
[ 0.108888] Key type id_resolver registered
[ 0.108899] Key type id_legacy registered
[ 0.108942] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.108964] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.109155] 9p: Installing v9fs 9p2000 file system support
[ 0.156935] NET: Registered PF_ALG protocol family
[ 0.156978] Key type asymmetric registered
[ 0.156991] Asymmetric key parser 'x509' registered
[ 0.157002] Asymmetric key parser 'pkcs8' registered
[ 0.157113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.157366] io scheduler mq-deadline registered
[ 0.157383] io scheduler kyber registered
[ 0.167478] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.169951] msm_serial: driver initialized
[ 0.180096] loop: module loaded
[ 0.181051] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.188408] qcom-spmi-regulator 200f000.spmi:pmic@1:regulators: unsupported regulator: name=l5 type=0x21, subtype=0x2B, dig major rev=0x02
[ 0.190206] tun: Universal TUN/TAP device driver, 1.6
[ 0.191624] usbcore: registered new interface driver usb-storage
[ 0.192437] i2c_dev: i2c /dev entries driver
[ 0.205383] Freeing initrd memory: 3156K
[ 1.652199] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 1.654910] sdhci: Secure Digital Host Controller Interface driver
[ 1.654925] sdhci: Copyright(c) Pierre Ossman
[ 1.655407] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.656185] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.656259] hid: raw HID events driver (C) Jiri Kosina
[ 1.656911] usbcore: registered new interface driver usbhid
[ 1.656925] usbhid: USB HID core driver
[ 1.657801] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.661951] NET: Registered PF_PACKET protocol family
[ 1.662066] 9pnet: Installing 9P2000 support
[ 1.662145] Key type dns_resolver registered
[ 1.672141] Loading compiled-in X.509 certificates
[ 1.683355] Key type .fscrypt registered
[ 1.683372] Key type fscrypt-provisioning registered
[ 1.696713] qcom,wled 200f000.spmi:pmic@3:leds@d800: error -ENXIO: IRQ ovp not found
[ 1.698520] qcom-cpr3 b018000.power-controller: thread initialized with 10 OPPs
[ 1.699917] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 883200 KHz, changing to: 1036800 KHz
[ 1.711883] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.712853] clk: Disabling unused clocks
[ 1.712880] ALSA device list:
[ 1.712893] No soundcards found.
[ 1.712948] Warning: unable to open an initial console.
[ 1.715045] Freeing unused kernel memory: 2624K
[ 1.724346] s1: Bringing 0uV into 863000-863000uV
[ 1.724778] s3: Bringing 0uV into 984000-984000uV
[ 1.725050] s4: Bringing 0uV into 1896000-1896000uV
[ 1.725324] l1: Bringing 0uV into 1000000-1000000uV
[ 1.725580] l2: Bringing 0uV into 975000-975000uV
[ 1.725869] l3: Bringing 0uV into 925000-925000uV
[ 1.726136] l5: Bringing 0uV into 1800000-1800000uV
[ 1.726402] l6: Bringing 0uV into 1800000-1800000uV
[ 1.726654] l7: Bringing 0uV into 1800000-1800000uV
[ 1.726930] l8: Bringing 0uV into 2900000-2900000uV
[ 1.727188] l9: Bringing 0uV into 3000000-3000000uV
[ 1.727440] l10: Bringing 0uV into 2850000-2850000uV
[ 1.727709] l11: Bringing 0uV into 2950000-2950000uV
[ 1.727960] l12: Bringing 0uV into 1800000-1800000uV
[ 1.728237] l13: Bringing 0uV into 3125000-3125000uV
[ 1.728490] l16: Bringing 0uV into 1800000-1800000uV
[ 1.728753] l17: Bringing 0uV into 2750000-2750000uV
[ 1.729031] l19: Bringing 0uV into 1200000-1200000uV
[ 1.729305] l22: Bringing 0uV into 2800000-2800000uV
[ 1.729569] l23: Bringing 0uV into 975000-975000uV
[ 1.733924] Run /init as init process
[ 1.733945] with arguments:
[ 1.733952] /init
[ 1.733959] PMOS_NO_OUTPUT_REDIRECT
[ 1.733966] with environment:
[ 1.733971] HOME=/
[ 1.733977] TERM=linux
[ 1.733983] pmos_boot_uuid=ed4696e9-a645-410f-9bbc-3b26b526313e
[ 1.733990] pmos_root_uuid=4f447406-78ee-4f55-875c-81a4c091865a
[ 1.803177] qcom_scm: convention: smc arm 64
[ 1.804272] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 1.815593] msm_serial 78af000.serial: msm_serial: detected port #0
[ 1.815632] msm_serial 78af000.serial: uartclk = 7372798
[ 1.815831] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 52, base_baud = 460799) is a MSM
[ 1.816453] msm_serial: console setup on port #0
[ 1.816505] printk: console [ttyMSM0] enabled
[ 2.129810] platform 1a94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/dsi@1a94000/panel@0/port/endpoint
[ 3.328676] platform 1a94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/display-controller@1a01000/ports/port@0/endpoint
[ 3.342112] qcom-iommu soc@0:iommu@1c40000: iommu sec: pgtable size: 135168
[ 3.357691] spi_qup 7af6000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 3.361228] i2c_qup 78b6000.i2c: using default clock-frequency 100000
[ 3.374617] max98927 1-003a: MAX98927 revisionID: 0x42
[ 3.375037] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[ 3.469793] adreno 1c00000.gpu: Adding to iommu group 0
[ 3.471202] msm_mdp 1a01000.display-controller: Adding to iommu group 1
[ 3.484618] mipi-dsi 1a94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/dsi@1a94000/ports/port@1/endpoint
[ 3.485231] msm_mdp 1a01000.display-controller: bound 1a94000.dsi (ops dsi_ops [msm])
[ 3.497187] adreno 1c00000.gpu: supply vdd not found, using dummy regulator
[ 3.503587] adreno 1c00000.gpu: supply vddcx not found, using dummy regulator
[ 3.518477] msm_mdp 1a01000.display-controller: bound 1c00000.gpu (ops a3xx_ops [msm])
[ 3.518819] msm_mdp 1a01000.display-controller: [drm:mdp5_kms_init [msm]] MDP5 version v1.16
[ 3.546460] [drm] Initialized msm 1.10.0 20130625 for 1a01000.display-controller on minor 0
[ 3.546951] msm_mdp 1a01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from new location
[ 3.553845] msm_mdp 1a01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from new location
[ 3.628257] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 3.714460] edt_ft5x06 2-0038: touchscreen probe failed
[ 4.338040] Console: switching to colour frame buffer device 135x142
[ 4.389785] msm_mdp 1a01000.display-controller: [drm] fb0: msmdrmfb frame buffer device
[ 4.423295] sdhci_msm 7864900.mmc: Got CD GPIO
[ 4.513911] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
[ 4.525455] mmc1: SDHCI controller on 7864900.mmc [7864900.mmc] using ADMA 64-bit
[ 4.673214] mmc0: new HS400 MMC card at address 0001
[ 4.675214] mmcblk0: mmc0:0001 S0J9F8 58.2 GiB
[ 4.680117] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60
[ 4.689636] mmcblk0boot0: mmc0:0001 S0J9F8 4.00 MiB
[ 4.690833] mmcblk0boot1: mmc0:0001 S0J9F8 4.00 MiB
[ 4.691956] mmcblk0rpmb: mmc0:0001 S0J9F8 4.00 MiB, chardev (246:0)
[ 7.572280] configfs-gadget.g1 gadget.0: HOST MAC 82:24:d2:b8:aa:35
[ 7.572294] configfs-gadget.g1 gadget.0: MAC 5a:38:eb:d9:63:4d
[ 7.625263] EXT4-fs (dm-0): mounted filesystem ed4696e9-a645-410f-9bbc-3b26b526313e ro without journal. Quota mode: none.
[ 7.761686] random: crng init done
[ 9.741500] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 9.741513] EXT4-fs (dm-1): write access will be enabled during recovery
[ 10.009132] EXT4-fs (dm-1): orphan cleanup on readonly fs
[ 10.009794] EXT4-fs (dm-1): 1 orphan inode deleted
[ 10.009805] EXT4-fs (dm-1): recovery complete
[ 10.015273] EXT4-fs (dm-1): mounted filesystem 4f447406-78ee-4f55-875c-81a4c091865a ro with ordered data mode. Quota mode: none.
[ 10.018030] EXT4-fs (dm-0): unmounting filesystem ed4696e9-a645-410f-9bbc-3b26b526313e.
[ 10.055501] EXT4-fs (dm-0): warning: mounting unchecked fs, running e2fsck is recommended
[ 10.057329] EXT4-fs (dm-0): mounted filesystem ed4696e9-a645-410f-9bbc-3b26b526313e r/w without journal. Quota mode: none.
[ 12.291159] EXT4-fs (mmcblk0p49): mounted filesystem 57f8f4bc-abf4-655f-bf67-946fc0f9f25b ro with ordered data mode. Quota mode: none.
[ 13.490468] udevd[3853]: starting version 3.2.14
[ 13.557829] udevd[3853]: starting eudev-3.2.14
[ 13.616756] mc: Linux media interface: v0.10
[ 13.628760] videodev: Linux video capture interface: v2.00
[ 13.656678] qcom-spmi-vadc 200f000.spmi:pmic@2:adc@3100: Please define VDD channel
[ 13.657108] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: registered as rtc0
[ 13.657186] input: pm8941_pwrkey as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:pwrkey/input/input2
[ 13.659945] qcom-venus 1d00000.venus: Adding to iommu group 2
[ 13.660381] qcom-venus 1d00000.venus: non legacy binding
[ 13.660512] input: pm8941_resin as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:resin/input/input3
[ 14.925173] NET: Registered PF_QIPCRTR protocol family
[ 14.925794] remoteproc remoteproc1: 4080000.remoteproc is available
[ 14.925801] remoteproc remoteproc2: c200000.remoteproc is available
[ 14.926679] remoteproc remoteproc0: a204000.remoteproc is available
[ 14.926781] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.927326] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.928545] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.936264] remoteproc remoteproc2: powering up c200000.remoteproc
[ 14.936298] remoteproc remoteproc2: Booting fw image adsp.mdt, size 7516
[ 14.936673] remoteproc remoteproc0: powering up a204000.remoteproc
[ 14.936697] remoteproc remoteproc0: Booting fw image wcnss.mdt, size 7324
[ 15.486791] remoteproc remoteproc2: remote processor c200000.remoteproc is now up
[ 15.493517] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.495048] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.532963] NET: Registered PF_INET6 protocol family
[ 15.533919] Segment Routing with IPv6
[ 15.533937] In-situ OAM (IOAM) with IPv6
[ 15.561673] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[ 15.561808] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[ 15.561854] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[ 15.561895] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[ 15.561941] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:9
[ 15.561983] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:a
[ 15.562028] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:b
[ 15.562708] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.567604] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.574291] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.577086] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.578274] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.579971] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.580488] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.581546] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.581944] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.585444] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.585746] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.599094] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.600045] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 15.602105] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 15.611551] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: PMIC REV: 0 CODEC Version: 4
[ 15.611974] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 15.612097] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
[ 15.612134] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
[ 15.612150] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 15.612169] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 15.612188] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget ADC1 overwritten
[ 15.612215] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget ADC1 overwritten
[ 15.612240] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 15.612599] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX3 overwritten
[ 15.612704] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX3 overwritten
[ 15.657899] input: xiaomi-daisy Headset Jack as /devices/platform/soc@0/c051000.sound-card/sound/card0/input4
[ 15.710197] remoteproc remoteproc0: remote processor a204000.remoteproc is now up
[ 15.720696] EXT4-fs (dm-1): re-mounted 4f447406-78ee-4f55-875c-81a4c091865a r/w. Quota mode: none.
[ 15.735716] EXT4-fs (dm-1): re-mounted 4f447406-78ee-4f55-875c-81a4c091865a r/w. Quota mode: none.
[ 15.765204] EXT4-fs (dm-0): re-mounted ed4696e9-a645-410f-9bbc-3b26b526313e r/w. Quota mode: none.
[ 15.842261] qcom_wcnss_ctrl remoteproc0:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2
[ 16.192398] remoteproc remoteproc1: powering up 4080000.remoteproc
[ 16.195202] remoteproc remoteproc1: Booting fw image mba.mbn, size 233808
[ 16.196620] qcom-wcnss-pil a204000.remoteproc: unexpected response to sysmon event
[ 16.349934] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss
[ 16.645034] Bluetooth: Core ver 2.22
[ 16.645126] NET: Registered PF_BLUETOOTH protocol family
[ 16.645129] Bluetooth: HCI device and connection manager initialized
[ 16.645144] Bluetooth: HCI socket layer initialized
[ 16.645151] Bluetooth: L2CAP socket layer initialized
[ 16.645162] Bluetooth: SCO socket layer initialized
[ 17.755792] remoteproc remoteproc1: remote processor 4080000.remoteproc is now up
[ 20.957910] qcom_wcnss_ctrl remoteproc0:smd-edge.WCNSS_CTRL.-1.-1: expected cold boot completion
[ 21.022657] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 21.048106] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 21.085436] wcn36xx: mac address: 02:00:09:86:6e:c0
[ 21.184562] Bluetooth: MGMT ver 1.22
[ 23.972628] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vIris_TSMC_4.0 with 48MHz XO' and CRM version 'CNSS-PR-4-0-3-169-212583-1'
[ 23.972659] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
[ 25.227303] Adding 1048572k swap on /swapfile. Priority:-2 extents:12 across:3768320k SS
[ 25.410193] zram: Added device: zram0
[ 29.129091] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=5195 'kwin_wayland'
[ 33.038823] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 33.038918] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 33.039018] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 33.039110] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.444706] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10bdb] not expecting rsp
[ 38.793791] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.793836] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.793852] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.794119] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.939695] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.939741] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.939757] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.939772] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.940153] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.940179] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.940195] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 38.940209] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 325.656821] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 396.264907] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 399.751083] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 399.751136] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 399.751351] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230f665 hci version 0x100 quirks 0x0000000002000010
[ 399.751405] xhci-hcd xhci-hcd.1.auto: irq 68, io mem 0x07000000
[ 399.751612] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 399.751634] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 399.751655] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 399.752657] hub 1-0:1.0: USB hub found
[ 399.752688] hub 1-0:1.0: 1 port detected
[ 399.752989] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 399.753609] hub 2-0:1.0: USB hub found
[ 399.753632] hub 2-0:1.0: 1 port detected
[ 400.010396] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[ 400.179862] input: Razer Razer DeathAdder Essential as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:1532:006E.0001/input/input5
[ 400.180902] hid-generic 0003:1532:006E.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Essential] on usb-xhci-hcd.1.auto-1/input0
[ 400.184646] input: Razer Razer DeathAdder Essential Keyboard as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:1532:006E.0002/input/input6
[ 400.243115] input: Razer Razer DeathAdder Essential as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:1532:006E.0002/input/input7
[ 400.244331] hid-generic 0003:1532:006E.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Essential] on usb-xhci-hcd.1.auto-1/input1
[ 400.247118] input: Razer Razer DeathAdder Essential as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:1532:006E.0003/input/input8
[ 400.307833] hid-generic 0003:1532:006E.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Essential] on usb-xhci-hcd.1.auto-1/input2
[ 429.032666] wlan0: authenticate with 02:3e:40:c9:cf:93
[ 429.092101] wlan0: send auth to 02:3e:40:c9:cf:93 (try 1/3)
[ 429.092774] wlan0: authenticated
[ 429.094196] wlan0: associate with 02:3e:40:c9:cf:93 (try 1/3)
[ 429.095541] wlan0: RX AssocResp from 02:3e:40:c9:cf:93 (capab=0x531 status=0 aid=13)
[ 429.132047] wlan0: associated
[ 559.344579] usb 1-1: USB disconnect, device number 2
[ 559.381877] xhci-hcd xhci-hcd.1.auto: remove, state 4
[ 559.381914] usb usb2: USB disconnect, device number 1
[ 559.382697] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
[ 559.382716] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 559.382726] usb usb1: USB disconnect, device number 1
[ 569.509457] xhci-hcd xhci-hcd.1.auto: xHCI host not responding to stop endpoint command
[ 569.539733] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead
[ 569.689051] xhci-hcd xhci-hcd.1.auto: USB bus 1 deregistered
In older dmesg when I used device for a while, it sayed "edt_ft5x06" multiple times
old dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.5.2-postmarketos-qcom-msm8953 (pmos@build) (aarch64-alpine-linux-musl-gcc (Alpine 13.1.1_git20230722) 13.1.1 20230722, GNU ld (GNU Binutils) 2.40) #1-postmarketos-qcom-msm8953 SMP PREEMPT Mon Oct 16 19:22:41 UTC
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Xiaomi Mi A2 Lite
[ 0.000000] Malformed early option 'earlycon'
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000081800000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node zap@81800000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000081800000..0x0000000081801fff (8 KiB) nomap non-reusable zap@81800000
[ 0.000000] OF: reserved mem: 0x0000000084a00000..0x00000000862fffff (25600 KiB) nomap non-reusable qseecom@84a00000
[ 0.000000] OF: reserved mem: 0x0000000086300000..0x00000000863fffff (1024 KiB) nomap non-reusable smem@86300000
[ 0.000000] OF: reserved mem: 0x0000000086400000..0x00000000867fffff (4096 KiB) nomap non-reusable reserved@86400000
[ 0.000000] OF: reserved mem: 0x0000000086c00000..0x000000008d5fffff (108544 KiB) nomap non-reusable mpss@86c00000
[ 0.000000] OF: reserved mem: 0x000000008d600000..0x000000008e7fffff (18432 KiB) nomap non-reusable adsp@8d600000
[ 0.000000] OF: reserved mem: 0x000000008e800000..0x000000008eefffff (7168 KiB) nomap non-reusable wcnss@8e800000
[ 0.000000] OF: reserved mem: 0x0000000090000000..0x0000000090000fff (4 KiB) nomap non-reusable dfps-data@90000000
[ 0.000000] OF: reserved mem: 0x0000000090001000..0x00000000913fffff (20476 KiB) nomap non-reusable cont-splash@90001000
[ 0.000000] OF: reserved mem: 0x0000000091400000..0x0000000091afffff (7168 KiB) nomap non-reusable venus@91400000
[ 0.000000] OF: reserved mem: 0x0000000092000000..0x00000000920fffff (1024 KiB) nomap non-reusable mba@92000000
[ 0.000000] OF: reserved mem: 0x000000009ff00000..0x000000009fffffff (1024 KiB) map non-reusable ramoops@9ff00000
[ 0.000000] OF: reserved mem: 0x00000000f2d00000..0x00000000f2e7ffff (1536 KiB) nomap non-reusable rmtfs@f2d00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000010000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xff86b9c0-0xff86dfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000010000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000817fffff]
[ 0.000000] node 0: [mem 0x0000000081800000-0x0000000081801fff]
[ 0.000000] node 0: [mem 0x0000000081802000-0x00000000849fffff]
[ 0.000000] node 0: [mem 0x0000000084a00000-0x00000000867fffff]
[ 0.000000] node 0: [mem 0x0000000086800000-0x0000000086bfffff]
[ 0.000000] node 0: [mem 0x0000000086c00000-0x000000008eefffff]
[ 0.000000] node 0: [mem 0x000000008ef00000-0x000000008fffffff]
[ 0.000000] node 0: [mem 0x0000000090000000-0x0000000091afffff]
[ 0.000000] node 0: [mem 0x0000000091b00000-0x0000000091ffffff]
[ 0.000000] node 0: [mem 0x0000000092000000-0x00000000920fffff]
[ 0.000000] node 0: [mem 0x0000000092100000-0x00000000f2cfffff]
[ 0.000000] node 0: [mem 0x00000000f2d00000-0x00000000f2e7ffff]
[ 0.000000] node 0: [mem 0x00000000f2e80000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[ 0.000000] percpu: Embedded 21 pages/cpu s48552 r8192 d29272 u86016
[ 0.000000] pcpu-alloc: s48552 r8192 d29272 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: earlycon console=ttyMSM0,115200 PMOS_NO_OUTPUT_REDIRECT pmos_boot_uuid=ed4696e9-a645-410f-9bbc-3b26b526313e pmos_root_uuid=4f447406-78ee-4f55-875c-81a4c091865a
[ 0.000000] Unknown kernel command line parameters "PMOS_NO_OUTPUT_REDIRECT pmos_boot_uuid=ed4696e9-a645-410f-9bbc-3b26b526313e pmos_root_uuid=4f447406-78ee-4f55-875c-81a4c091865a", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967680
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000f5558000-0x00000000f9558000] (64MB)
[ 0.000000] Memory: 3537776K/3932160K available (11392K kernel code, 1338K rwdata, 3956K rodata, 2624K init, 445K bss, 361616K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000223] Console: colour dummy device 80x25
[ 0.000320] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000335] pid_max: default: 32768 minimum: 301
[ 0.000441] LSM: initializing lsm=capability,integrity
[ 0.000570] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000595] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003292] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003410] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003684] rcu: Hierarchical SRCU implementation.
[ 0.003689] rcu: Max phase no-delay instances is 1000.
[ 0.005365] smp: Bringing up secondary CPUs ...
[ 0.006232] Detected VIPT I-cache on CPU1
[ 0.006366] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007263] Detected VIPT I-cache on CPU2
[ 0.007359] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.008197] Detected VIPT I-cache on CPU3
[ 0.008285] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.009248] Detected VIPT I-cache on CPU4
[ 0.009368] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.010229] Detected VIPT I-cache on CPU5
[ 0.010312] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.011132] Detected VIPT I-cache on CPU6
[ 0.011218] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.012053] Detected VIPT I-cache on CPU7
[ 0.012141] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.012254] smp: Brought up 1 node, 8 CPUs
[ 0.012265] SMP: Total of 8 processors activated.
[ 0.012271] CPU features: detected: 32-bit EL0 Support
[ 0.012275] CPU features: detected: 32-bit EL1 Support
[ 0.012282] CPU features: detected: CRC32 instructions
[ 0.012410] CPU: All CPU(s) started at EL1
[ 0.012438] alternatives: applying system-wide alternatives
[ 0.015464] devtmpfs: initialized
[ 0.030932] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.030957] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.032036] pinctrl core: initialized pinctrl subsystem
[ 0.033215] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.034599] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.034833] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.035131] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.035208] audit: initializing netlink subsys (disabled)
[ 0.035443] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[ 0.035999] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.036007] thermal_sys: Registered thermal governor 'step_wise'
[ 0.036012] thermal_sys: Registered thermal governor 'user_space'
[ 0.036017] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.036066] cpuidle: using governor menu
[ 0.036315] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.036566] ASID allocator initialised with 65536 entries
[ 0.036833] Serial: AMBA PL011 UART driver
[ 0.037768] ramoops: found existing invalid buffer, size 20979, start 20987
[ 0.037784] printk: console [ramoops-1] enabled
[ 0.038341] pstore: Registered ramoops as persistent store backend
[ 0.038350] ramoops: using 0x100000@0x9ff00000, ecc: 0
[ 0.053570] platform 1800000.clock-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/phy@1a94400
[ 0.054652] platform 1a00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/interconnect@500000
[ 0.054829] platform 1a00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@1800000
[ 0.065336] Modules: 27776 pages in range for non-PLT usage
[ 0.065348] Modules: 519296 pages in range for PLT usage
[ 0.066262] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.066286] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.066299] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.066309] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.066321] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.066331] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.066343] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.066353] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.069013] iommu: Default domain type: Translated
[ 0.069034] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.069376] SCSI subsystem initialized
[ 0.069599] usbcore: registered new interface driver usbfs
[ 0.069655] usbcore: registered new interface driver hub
[ 0.069709] usbcore: registered new device driver usb
[ 0.070297] i2c-gpio i2c-sensors: using lines 526 (SDA) and 527 (SCL)
[ 0.071851] Advanced Linux Sound Architecture Driver Initialized.
[ 0.073113] clocksource: Switched to clocksource arch_sys_counter
[ 0.073399] VFS: Disk quotas dquot_6.6.0
[ 0.073446] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.083184] NET: Registered PF_INET protocol family
[ 0.083440] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.087538] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.087598] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.087671] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.087991] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.089157] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.089330] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.089457] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.089751] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.090271] RPC: Registered named UNIX socket transport module.
[ 0.090286] RPC: Registered udp transport module.
[ 0.090296] RPC: Registered tcp transport module.
[ 0.090305] RPC: Registered tcp-with-tls transport module.
[ 0.090314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.090561] Unpacking initramfs...
[ 0.105716] kvm [1]: HYP mode not available
[ 0.107328] Initialise system trusted keyrings
[ 0.107619] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.108337] NFS: Registering the id_resolver key type
[ 0.108391] Key type id_resolver registered
[ 0.108403] Key type id_legacy registered
[ 0.108446] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.108469] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.108677] 9p: Installing v9fs 9p2000 file system support
[ 0.156581] NET: Registered PF_ALG protocol family
[ 0.156624] Key type asymmetric registered
[ 0.156636] Asymmetric key parser 'x509' registered
[ 0.156647] Asymmetric key parser 'pkcs8' registered
[ 0.156755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.157010] io scheduler mq-deadline registered
[ 0.157027] io scheduler kyber registered
[ 0.167313] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.169807] msm_serial: driver initialized
[ 0.180036] loop: module loaded
[ 0.180998] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.188329] qcom-spmi-regulator 200f000.spmi:pmic@1:regulators: unsupported regulator: name=l5 type=0x21, subtype=0x2B, dig major rev=0x02
[ 0.190514] tun: Universal TUN/TAP device driver, 1.6
[ 0.191807] usbcore: registered new interface driver usb-storage
[ 0.192640] i2c_dev: i2c /dev entries driver
[ 0.204564] Freeing initrd memory: 3156K
[ 0.891536] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.894260] sdhci: Secure Digital Host Controller Interface driver
[ 0.894275] sdhci: Copyright(c) Pierre Ossman
[ 0.894759] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.895536] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.895611] hid: raw HID events driver (C) Jiri Kosina
[ 0.896254] usbcore: registered new interface driver usbhid
[ 0.896268] usbhid: USB HID core driver
[ 0.897156] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.901404] NET: Registered PF_PACKET protocol family
[ 0.901519] 9pnet: Installing 9P2000 support
[ 0.901614] Key type dns_resolver registered
[ 0.911620] Loading compiled-in X.509 certificates
[ 0.922865] Key type .fscrypt registered
[ 0.922882] Key type fscrypt-provisioning registered
[ 0.934449] qcom,wled 200f000.spmi:pmic@3:leds@d800: error -ENXIO: IRQ ovp not found
[ 0.936221] qcom-cpr3 b018000.power-controller: thread initialized with 10 OPPs
[ 0.937664] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 883200 KHz, changing to: 1036800 KHz
[ 0.949305] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 0.950170] clk: Disabling unused clocks
[ 0.950197] ALSA device list:
[ 0.950209] No soundcards found.
[ 0.950267] Warning: unable to open an initial console.
[ 0.951376] Freeing unused kernel memory: 2624K
[ 0.961576] s1: Bringing 0uV into 863000-863000uV
[ 0.962080] s3: Bringing 0uV into 984000-984000uV
[ 0.962330] s4: Bringing 0uV into 1896000-1896000uV
[ 0.962602] l1: Bringing 0uV into 1000000-1000000uV
[ 0.962857] l2: Bringing 0uV into 975000-975000uV
[ 0.963112] l3: Bringing 0uV into 925000-925000uV
[ 0.963378] l5: Bringing 0uV into 1800000-1800000uV
[ 0.963635] l6: Bringing 0uV into 1800000-1800000uV
[ 0.963887] l7: Bringing 0uV into 1800000-1800000uV
[ 0.964159] l8: Bringing 0uV into 2900000-2900000uV
[ 0.964415] l9: Bringing 0uV into 3000000-3000000uV
[ 0.964665] l10: Bringing 0uV into 2850000-2850000uV
[ 0.964934] l11: Bringing 0uV into 2950000-2950000uV
[ 0.965220] l12: Bringing 0uV into 1800000-1800000uV
[ 0.965512] l13: Bringing 0uV into 3125000-3125000uV
[ 0.965771] l16: Bringing 0uV into 1800000-1800000uV
[ 0.966041] l17: Bringing 0uV into 2750000-2750000uV
[ 0.966321] l19: Bringing 0uV into 1200000-1200000uV
[ 0.966588] l22: Bringing 0uV into 2800000-2800000uV
[ 0.966850] l23: Bringing 0uV into 975000-975000uV
[ 0.973421] Run /init as init process
[ 0.973436] with arguments:
[ 0.973444] /init
[ 0.973450] PMOS_NO_OUTPUT_REDIRECT
[ 0.973456] with environment:
[ 0.973462] HOME=/
[ 0.973468] TERM=linux
[ 0.973473] pmos_boot_uuid=ed4696e9-a645-410f-9bbc-3b26b526313e
[ 0.973480] pmos_root_uuid=4f447406-78ee-4f55-875c-81a4c091865a
[ 1.043383] qcom_scm: convention: smc arm 64
[ 1.044477] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 1.055392] msm_serial 78af000.serial: msm_serial: detected port #0
[ 1.055426] msm_serial 78af000.serial: uartclk = 7372798
[ 1.055640] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 52, base_baud = 460799) is a MSM
[ 1.056183] msm_serial: console setup on port #0
[ 1.056256] printk: console [ttyMSM0] enabled
[ 1.365354] platform 1a94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/dsi@1a94000/panel@0/port/endpoint
[ 2.575289] platform 1a94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/display-controller@1a01000/ports/port@0/endpoint
[ 2.588874] qcom-iommu soc@0:iommu@1c40000: iommu sec: pgtable size: 135168
[ 2.604571] spi_qup 7af6000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 2.607744] i2c_qup 78b6000.i2c: using default clock-frequency 100000
[ 2.621937] max98927 1-003a: MAX98927 revisionID: 0x42
[ 2.622366] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[ 2.668811] adreno 1c00000.gpu: Adding to iommu group 0
[ 2.669546] msm_mdp 1a01000.display-controller: Adding to iommu group 1
[ 2.684324] mipi-dsi 1a94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@1a00000/dsi@1a94000/ports/port@1/endpoint
[ 2.685030] msm_mdp 1a01000.display-controller: bound 1a94000.dsi (ops dsi_ops [msm])
[ 2.696971] adreno 1c00000.gpu: supply vdd not found, using dummy regulator
[ 2.703584] adreno 1c00000.gpu: supply vddcx not found, using dummy regulator
[ 2.717634] msm_mdp 1a01000.display-controller: bound 1c00000.gpu (ops a3xx_ops [msm])
[ 2.717908] msm_mdp 1a01000.display-controller: [drm:mdp5_kms_init [msm]] MDP5 version v1.16
[ 2.745571] [drm] Initialized msm 1.10.0 20130625 for 1a01000.display-controller on minor 0
[ 2.746035] msm_mdp 1a01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from new location
[ 2.752873] msm_mdp 1a01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from new location
[ 2.787713] ------------[ cut here ]------------
[ 2.787720] pclk0_clk_src: rcg didn't update its configuration.
[ 2.787752] WARNING: CPU: 1 PID: 55 at drivers/clk/qcom/clk-rcg2.c:133 update_config+0xc8/0xd8
[ 2.787766] Modules linked in: panel_mdss_ili7807_fhdplus panel_himax_hx8399c_fhdplus msm gpu_sched drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks mdt_loader edt_ft5x06
[ 2.787789] CPU: 1 PID: 55 Comm: kworker/u16:1 Not tainted 6.5.2-postmarketos-qcom-msm8953 #1-postmarketos-qcom-msm8953
[ 2.787794] Hardware name: Xiaomi Mi A2 Lite (DT)
[ 2.787798] Workqueue: events_unbound deferred_probe_work_func
[ 2.787805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.787810] pc : update_config+0xc8/0xd8
[ 2.787813] lr : update_config+0xc8/0xd8
[ 2.787817] sp : ffff8000815a29c0
[ 2.787818] x29: ffff8000815a29c0 x28: ffff80007956e6d8 x27: ffff00001276bc80
[ 2.787825] x26: ffff000012129780 x25: ffff000012129780 x24: 0000000002054518
[ 2.787831] x23: ffff800081268718 x22: 0000000002054518 x21: ffff800080e2a238
[ 2.787837] x20: ffff800081268700 x19: 0000000000000000 x18: fffffffffffe4bb0
[ 2.787843] x17: ffff80008144d71c x16: ffff80008144d720 x15: 0000000000000040
[ 2.787849] x14: fffffffffffe4bf0 x13: 2e6e6f6974617275 x12: 6769666e6f632073
[ 2.787855] x11: 7469206574616470 x10: 752074276e646964 x9 : 72756769666e6f63
[ 2.787862] x8 : 2073746920657461 x7 : 6470752074276e64 x6 : 0000000000000000
[ 2.787868] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 2.787874] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000011c70000
[ 2.787880] Call trace:
[ 2.787883] update_config+0xc8/0xd8
[ 2.787886] clk_rcg2_configure+0xac/0xb4
[ 2.787890] clk_pixel_set_rate+0x130/0x174
[ 2.787894] clk_change_rate+0x16c/0x290
[ 2.787901] clk_change_rate+0x108/0x290
[ 2.787906] clk_change_rate+0x108/0x290
[ 2.787912] clk_change_rate+0x108/0x290
[ 2.787917] clk_change_rate+0x108/0x290
[ 2.787923] clk_core_set_rate_nolock+0x1d8/0x298
[ 2.787929] clk_set_rate+0x38/0x14c
[ 2.787934] _opp_config_clk_single+0x30/0xa8
[ 2.787940] _set_opp+0x2d4/0x550
[ 2.787945] dev_pm_opp_set_rate+0x180/0x268
[ 2.787950] dsi_link_clk_set_rate_6g+0x44/0x10c [msm]
[ 2.788067] msm_dsi_host_power_on+0xc0/0x904 [msm]
[ 2.788146] dsi_mgr_bridge_pre_enable+0x190/0x3b4 [msm]
[ 2.788225] drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm]
[ 2.788385] drm_atomic_bridge_chain_pre_enable+0xd8/0x150 [drm]
[ 2.788484] drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper]
[ 2.788556] msm_atomic_commit_tail+0x1a0/0x504 [msm]
[ 2.788635] commit_tail+0xa0/0x188 [drm_kms_helper]
[ 2.788681] drm_atomic_helper_commit+0x17c/0x194 [drm_kms_helper]
[ 2.788727] drm_atomic_commit+0xa8/0xe0 [drm]
[ 2.788824] drm_client_modeset_commit_atomic+0x1f8/0x264 [drm]
[ 2.788921] drm_client_modeset_commit_locked+0x5c/0x188 [drm]
[ 2.789018] drm_client_modeset_commit+0x2c/0x54 [drm]
[ 2.789115] __drm_fb_helper_restore_fbdev_mode_unlocked+0xa0/0xe0 [drm_kms_helper]
[ 2.789162] drm_fb_helper_set_par+0x30/0x4c [drm_kms_helper]
[ 2.789210] fbcon_init+0x1fc/0x4f8
[ 2.789219] visual_init+0xb4/0x104
[ 2.789225] do_bind_con_driver.isra.0+0x188/0x388
[ 2.789230] do_take_over_console+0x19c/0x1ec
[ 2.789233] do_fbcon_takeover+0x6c/0xe4
[ 2.789239] fbcon_fb_registered+0x1e0/0x1e8
[ 2.789243] register_framebuffer+0x1cc/0x288
[ 2.789248] __drm_fb_helper_initial_config_and_unlock+0x2e8/0x494 [drm_kms_helper]
[ 2.789296] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper]
[ 2.789342] msm_fbdev_client_hotplug+0x84/0xcc [msm]
[ 2.789428] drm_client_register+0x58/0x9c [drm]
[ 2.789546] msm_fbdev_setup+0x94/0x144 [msm]
[ 2.789627] msm_drm_bind+0x540/0x684 [msm]
[ 2.789705] try_to_bring_up_aggregate_device+0x214/0x2d8
[ 2.789714] __component_add+0xa4/0x18c
[ 2.789718] component_add+0x14/0x20
[ 2.789722] dsi_dev_attach+0x20/0x2c [msm]
[ 2.789801] dsi_host_attach+0x9c/0x144 [msm]
[ 2.789881] mipi_dsi_attach+0x28/0x3c
[ 2.789885] ili7807plus_probe+0xdc/0x1a4 [panel_mdss_ili7807_fhdplus]
[ 2.789897] mipi_dsi_drv_probe+0x20/0x2c
[ 2.789901] really_probe+0x188/0x3c4
[ 2.789906] __driver_probe_device+0x7c/0x16c
[ 2.789910] driver_probe_device+0x3c/0x110
[ 2.789914] __device_attach_driver+0xbc/0x158
[ 2.789917] bus_for_each_drv+0x80/0xdc
[ 2.789924] __device_attach+0x9c/0x1ac
[ 2.789927] device_initial_probe+0x14/0x20
[ 2.789932] bus_probe_device+0xac/0xb0
[ 2.789935] device_add+0x5e4/0x7d4
[ 2.789940] mipi_dsi_device_register_full+0xd8/0x198
[ 2.789945] mipi_dsi_host_register+0xa4/0x19c
[ 2.789948] msm_dsi_host_register+0x40/0x5c [msm]
[ 2.790027] msm_dsi_manager_register+0x134/0x230 [msm]
[ 2.790107] dsi_dev_probe+0x174/0x20c [msm]
[ 2.790186] platform_probe+0x68/0xc8
[ 2.790191] really_probe+0x188/0x3c4
[ 2.790195] __driver_probe_device+0x7c/0x16c
[ 2.790198] driver_probe_device+0x3c/0x110
[ 2.790203] __device_attach_driver+0xbc/0x158
[ 2.790206] bus_for_each_drv+0x80/0xdc
[ 2.790212] __device_attach+0x9c/0x1ac
[ 2.790216] device_initial_probe+0x14/0x20
[ 2.790220] bus_probe_device+0xac/0xb0
[ 2.790223] deferred_probe_work_func+0x9c/0xec
[ 2.790227] process_one_work+0x1c0/0x334
[ 2.790233] worker_thread+0x68/0x428
[ 2.790237] kthread+0x110/0x114
[ 2.790242] ret_from_fork+0x10/0x20
[ 2.790248] ---[ end trace 0000000000000000 ]---
[ 2.791036] ------------[ cut here ]------------
[ 2.791041] pclk0_clk_src: rcg didn't update its configuration.
[ 2.791071] WARNING: CPU: 1 PID: 55 at drivers/clk/qcom/clk-rcg2.c:133 update_config+0xc8/0xd8
[ 2.791082] Modules linked in: panel_mdss_ili7807_fhdplus panel_himax_hx8399c_fhdplus msm gpu_sched drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks mdt_loader edt_ft5x06
[ 2.791104] CPU: 1 PID: 55 Comm: kworker/u16:1 Tainted: G W 6.5.2-postmarketos-qcom-msm8953 #1-postmarketos-qcom-msm8953
[ 2.791110] Hardware name: Xiaomi Mi A2 Lite (DT)
[ 2.791113] Workqueue: events_unbound deferred_probe_work_func
[ 2.791118] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.791123] pc : update_config+0xc8/0xd8
[ 2.791126] lr : update_config+0xc8/0xd8
[ 2.791130] sp : ffff8000815a2b80
[ 2.791131] x29: ffff8000815a2b80 x28: ffff80007956e6d8 x27: ffff00001276bc80
[ 2.791138] x26: ffff000012129780 x25: ffff000012129780 x24: 000000000a1a5978
[ 2.791144] x23: ffff800081268718 x22: 000000000a1a5978 x21: ffff800080e2a238
[ 2.791150] x20: ffff800081268700 x19: 0000000000000000 x18: fffffffffffe6110
[ 2.791156] x17: ffff80008144d71c x16: ffff80008144d720 x15: 0000000000000040
[ 2.791162] x14: fffffffffffe6150 x13: 2e6e6f6974617275 x12: 6769666e6f632073
[ 2.791169] x11: 7469206574616470 x10: 752074276e646964 x9 : 72756769666e6f63
[ 2.791175] x8 : 2073746920657461 x7 : 6470752074276e64 x6 : 0000000000000000
[ 2.791180] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 2.791186] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000011c70000
[ 2.791193] Call trace:
[ 2.791195] update_config+0xc8/0xd8
[ 2.791199] clk_rcg2_configure+0xac/0xb4
[ 2.791202] clk_pixel_set_rate+0x130/0x174
[ 2.791206] clk_change_rate+0x16c/0x290
[ 2.791212] clk_change_rate+0x108/0x290
[ 2.791218] clk_core_set_rate_nolock+0x1d8/0x298
[ 2.791224] clk_set_rate+0x38/0x14c
[ 2.791229] dsi_link_clk_set_rate_6g+0x54/0x10c [msm]
[ 2.791316] msm_dsi_host_power_on+0xc0/0x904 [msm]
[ 2.791394] dsi_mgr_bridge_pre_enable+0x190/0x3b4 [msm]
[ 2.791474] drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm]
[ 2.791604] drm_atomic_bridge_chain_pre_enable+0xd8/0x150 [drm]
[ 2.791702] drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper]
[ 2.791773] msm_atomic_commit_tail+0x1a0/0x504 [msm]
[ 2.791853] commit_tail+0xa0/0x188 [drm_kms_helper]
[ 2.791900] drm_atomic_helper_commit+0x17c/0x194 [drm_kms_helper]
[ 2.791946] drm_atomic_commit+0xa8/0xe0 [drm]
[ 2.792045] drm_client_modeset_commit_atomic+0x1f8/0x264 [drm]
[ 2.792142] drm_client_modeset_commit_locked+0x5c/0x188 [drm]
[ 2.792239] drm_client_modeset_commit+0x2c/0x54 [drm]
[ 2.792336] __drm_fb_helper_restore_fbdev_mode_unlocked+0xa0/0xe0 [drm_kms_helper]
[ 2.792382] drm_fb_helper_set_par+0x30/0x4c [drm_kms_helper]
[ 2.792429] fbcon_init+0x1fc/0x4f8
[ 2.792436] visual_init+0xb4/0x104
[ 2.792443] do_bind_con_driver.isra.0+0x188/0x388
[ 2.792448] do_take_over_console+0x19c/0x1ec
[ 2.792451] do_fbcon_takeover+0x6c/0xe4
[ 2.792457] fbcon_fb_registered+0x1e0/0x1e8
[ 2.792460] register_framebuffer+0x1cc/0x288
[ 2.792465] __drm_fb_helper_initial_config_and_unlock+0x2e8/0x494 [drm_kms_helper]
[ 2.792511] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper]
[ 2.792558] msm_fbdev_client_hotplug+0x84/0xcc [msm]
[ 2.792637] drm_client_register+0x58/0x9c [drm]
[ 2.792734] msm_fbdev_setup+0x94/0x144 [msm]
[ 2.792813] msm_drm_bind+0x540/0x684 [msm]
[ 2.792892] try_to_bring_up_aggregate_device+0x214/0x2d8
[ 2.792898] __component_add+0xa4/0x18c
[ 2.792902] component_add+0x14/0x20
[ 2.792906] dsi_dev_attach+0x20/0x2c [msm]
[ 2.792985] dsi_host_attach+0x9c/0x144 [msm]
[ 2.793064] mipi_dsi_attach+0x28/0x3c
[ 2.793068] ili7807plus_probe+0xdc/0x1a4 [panel_mdss_ili7807_fhdplus]
[ 2.793079] mipi_dsi_drv_probe+0x20/0x2c
[ 2.793083] really_probe+0x188/0x3c4
[ 2.793087] __driver_probe_device+0x7c/0x16c
[ 2.793091] driver_probe_device+0x3c/0x110
[ 2.793095] __device_attach_driver+0xbc/0x158
[ 2.793099] bus_for_each_drv+0x80/0xdc
[ 2.793105] __device_attach+0x9c/0x1ac
[ 2.793109] device_initial_probe+0x14/0x20
[ 2.793113] bus_probe_device+0xac/0xb0
[ 2.793116] device_add+0x5e4/0x7d4
[ 2.793122] mipi_dsi_device_register_full+0xd8/0x198
[ 2.793126] mipi_dsi_host_register+0xa4/0x19c
[ 2.793129] msm_dsi_host_register+0x40/0x5c [msm]
[ 2.793209] msm_dsi_manager_register+0x134/0x230 [msm]
[ 2.793289] dsi_dev_probe+0x174/0x20c [msm]
[ 2.793369] platform_probe+0x68/0xc8
[ 2.793374] really_probe+0x188/0x3c4
[ 2.793378] __driver_probe_device+0x7c/0x16c
[ 2.793382] driver_probe_device+0x3c/0x110
[ 2.793385] __device_attach_driver+0xbc/0x158
[ 2.793389] bus_for_each_drv+0x80/0xdc
[ 2.793396] __device_attach+0x9c/0x1ac
[ 2.793399] device_initial_probe+0x14/0x20
[ 2.793404] bus_probe_device+0xac/0xb0
[ 2.793407] deferred_probe_work_func+0x9c/0xec
[ 2.793411] process_one_work+0x1c0/0x334
[ 2.793416] worker_thread+0x68/0x428
[ 2.793420] kthread+0x110/0x114
[ 2.793425] ret_from_fork+0x10/0x20
[ 2.793431] ---[ end trace 0000000000000000 ]---
[ 2.839911] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 2.941836] edt_ft5x06 2-0038: touchscreen probe failed
[ 3.549493] Console: switching to colour frame buffer device 135x142
[ 4.580230] msm_mdp 1a01000.display-controller: [drm] fb0: msmdrmfb frame buffer device
[ 4.615778] sdhci_msm 7864900.mmc: Got CD GPIO
[ 4.713325] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
[ 4.733895] mmc1: SDHCI controller on 7864900.mmc [7864900.mmc] using ADMA 64-bit
[ 4.887201] mmc0: new HS400 MMC card at address 0001
[ 4.888440] mmcblk0: mmc0:0001 S0J9F8 58.2 GiB
[ 4.891767] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60
[ 4.897167] mmcblk0boot0: mmc0:0001 S0J9F8 4.00 MiB
[ 4.898108] mmcblk0boot1: mmc0:0001 S0J9F8 4.00 MiB
[ 4.899049] mmcblk0rpmb: mmc0:0001 S0J9F8 4.00 MiB, chardev (246:0)
[ 7.572810] configfs-gadget.g1 gadget.0: HOST MAC 5a:7a:f9:54:2c:41
[ 7.572824] configfs-gadget.g1 gadget.0: MAC 1a:47:1d:8d:94:a6
[ 7.628515] EXT4-fs (dm-0): mounted filesystem ed4696e9-a645-410f-9bbc-3b26b526313e ro without journal. Quota mode: none.
[ 7.849139] random: crng init done
[ 9.934732] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 9.934747] EXT4-fs (dm-1): write access will be enabled during recovery
[ 10.019301] EXT4-fs (dm-1): orphan cleanup on readonly fs
[ 10.020219] EXT4-fs (dm-1): 1 orphan inode deleted
[ 10.020228] EXT4-fs (dm-1): recovery complete
[ 10.026754] EXT4-fs (dm-1): mounted filesystem 4f447406-78ee-4f55-875c-81a4c091865a ro with ordered data mode. Quota mode: none.
[ 10.032787] EXT4-fs (dm-0): unmounting filesystem ed4696e9-a645-410f-9bbc-3b26b526313e.
[ 10.048428] EXT4-fs (dm-0): warning: mounting unchecked fs, running e2fsck is recommended
[ 10.075515] EXT4-fs (dm-0): mounted filesystem ed4696e9-a645-410f-9bbc-3b26b526313e r/w without journal. Quota mode: none.
[ 12.310664] EXT4-fs (mmcblk0p49): mounted filesystem 57f8f4bc-abf4-655f-bf67-946fc0f9f25b ro with ordered data mode. Quota mode: none.
[ 13.512040] udevd[3850]: starting version 3.2.14
[ 13.593140] udevd[3850]: starting eudev-3.2.14
[ 13.661204] mc: Linux media interface: v0.10
[ 13.671047] videodev: Linux video capture interface: v2.00
[ 13.681384] qcom-spmi-vadc 200f000.spmi:pmic@2:adc@3100: Please define VDD channel
[ 13.682902] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: registered as rtc0
[ 13.684374] input: pm8941_pwrkey as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:pwrkey/input/input2
[ 13.686899] input: pm8941_resin as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:resin/input/input3
[ 13.700217] qcom-venus 1d00000.venus: Adding to iommu group 2
[ 13.700567] qcom-venus 1d00000.venus: non legacy binding
[ 14.243438] NET: Registered PF_QIPCRTR protocol family
[ 14.243985] remoteproc remoteproc1: 4080000.remoteproc is available
[ 14.244029] remoteproc remoteproc2: c200000.remoteproc is available
[ 14.244850] remoteproc remoteproc0: a204000.remoteproc is available
[ 14.246444] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.246720] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.248985] remoteproc remoteproc2: powering up c200000.remoteproc
[ 14.249013] remoteproc remoteproc2: Booting fw image adsp.mdt, size 7516
[ 14.249395] remoteproc remoteproc0: powering up a204000.remoteproc
[ 14.249418] remoteproc remoteproc0: Booting fw image wcnss.mdt, size 7324
[ 14.794056] NET: Registered PF_INET6 protocol family
[ 14.795318] Segment Routing with IPv6
[ 14.795336] In-situ OAM (IOAM) with IPv6
[ 14.804582] remoteproc remoteproc2: remote processor c200000.remoteproc is now up
[ 14.810272] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.810846] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.878970] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[ 14.879097] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[ 14.879150] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[ 14.879202] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[ 14.879250] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:9
[ 14.879300] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:a
[ 14.879348] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:b
[ 14.880151] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.880663] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.892355] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.893231] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.896849] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.897185] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.900318] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.900566] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.904970] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.905355] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.917745] msm8916-wcd-digital-codec c0f0000.codec: failed to get mclk
[ 14.918362] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: failed to get mclk
[ 14.928628] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: PMIC REV: 0 CODEC Version: 4
[ 14.929063] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 14.929232] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
[ 14.929267] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
[ 14.929284] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 14.929302] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 14.929322] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget ADC1 overwritten
[ 14.929349] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget ADC1 overwritten
[ 14.929374] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
[ 14.929740] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX3 overwritten
[ 14.929843] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pmic@1:codec@f000: ASoC: source widget PDM_RX3 overwritten
[ 14.973025] input: xiaomi-daisy Headset Jack as /devices/platform/soc@0/c051000.sound-card/sound/card0/input4
[ 14.994630] EXT4-fs (dm-1): re-mounted 4f447406-78ee-4f55-875c-81a4c091865a r/w. Quota mode: none.
[ 15.006686] EXT4-fs (dm-1): re-mounted 4f447406-78ee-4f55-875c-81a4c091865a r/w. Quota mode: none.
[ 15.045513] EXT4-fs (dm-0): re-mounted ed4696e9-a645-410f-9bbc-3b26b526313e r/w. Quota mode: none.
[ 15.050130] remoteproc remoteproc0: remote processor a204000.remoteproc is now up
[ 15.184212] qcom_wcnss_ctrl remoteproc0:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2
[ 15.452660] remoteproc remoteproc1: powering up 4080000.remoteproc
[ 15.455570] remoteproc remoteproc1: Booting fw image mba.mbn, size 233808
[ 15.457079] qcom-wcnss-pil a204000.remoteproc: unexpected response to sysmon event
[ 15.605673] qcom-q6v5-mss 4080000.remoteproc: MBA booted without debug policy, loading mpss
[ 15.945360] Bluetooth: Core ver 2.22
[ 15.945457] NET: Registered PF_BLUETOOTH protocol family
[ 15.945460] Bluetooth: HCI device and connection manager initialized
[ 15.945476] Bluetooth: HCI socket layer initialized
[ 15.945482] Bluetooth: L2CAP socket layer initialized
[ 15.945494] Bluetooth: SCO socket layer initialized
[ 16.998692] remoteproc remoteproc1: remote processor 4080000.remoteproc is now up
[ 20.445352] qcom_wcnss_ctrl remoteproc0:smd-edge.WCNSS_CTRL.-1.-1: expected cold boot completion
[ 20.504634] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.527923] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 20.636645] wcn36xx: mac address: 02:00:09:86:6e:c0
[ 20.661244] Bluetooth: MGMT ver 1.22
[ 23.740359] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vIris_TSMC_4.0 with 48MHz XO' and CRM version 'CNSS-PR-4-0-3-169-212583-1'
[ 23.740388] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
[ 24.439485] Adding 1048572k swap on /swapfile. Priority:-2 extents:8 across:1949692k SS
[ 24.624511] zram: Added device: zram0
[ 28.316272] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=5195 'kwin_wayland'
[ 32.084380] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 32.084468] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 32.084561] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 32.084654] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 32.382675] ------------[ cut here ]------------
[ 32.382696] gcc_venus0_core0_vcodec0_clk status stuck at 'off'
[ 32.382746] WARNING: CPU: 4 PID: 5505 at drivers/clk/qcom/clk-branch.c:86 clk_branch_wait+0x13c/0x154
[ 32.382767] Modules linked in: zram zsmalloc wcn36xx mac80211 libarc4 cfg80211 btqcomsmd btqca nft_reject_inet nf_reject_ipv6 nf_reject_ipv4 nft_reject nft_ct nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 bluetooth ecdh_generic ecc rfkill wcnss_ctrl q6asm_dai q6routing q6voice_dai q6afe_clocks q6afe_dai q6voice q6adm q6asm q6cvs q6cvp q6afe q6mvm q6voice_common snd_q6dsp_common q6core apr pdr_interface qrtr_smd ipv6 crct10dif_ce qrtr snd_soc_apq8016_sbc qcom_q6v5_pas snd_soc_msm8916_digital qcom_rng snd_soc_qcom_common qcom_wcnss_pil qcom_q6v5_mss qcom_q6v5 qcom_common qcom_sysmon qmi_helpers qcom_pil_info venus_enc venus_dec videobuf2_dma_contig videobuf2_memops venus_core v4l2_mem2mem videobuf2_v4l2 qcom_pon reboot_mode snd_soc_msm8916_analog videobuf2_common qcom_spmi_temp_alarm rtc_pm8xxx qcom_spmi_vadc videodev qcom_vadc_common st_lsm6dsx_i2c st_lsm6dsx_spi mc st_lsm6dsx industrialio_triggered_buffer kfifo_buf rmtfs_mem socinfo panel_mdss_ili7807_fhdplus panel_himax_hx8399c_fhdplus msm gpu_sched drm_display_helper
[ 32.382950] drm_kms_helper drm drm_panel_orientation_quirks mdt_loader edt_ft5x06
[ 32.382971] CPU: 4 PID: 5505 Comm: gst-plugin-scan Tainted: G W 6.5.2-postmarketos-qcom-msm8953 #1-postmarketos-qcom-msm8953
[ 32.382979] Hardware name: Xiaomi Mi A2 Lite (DT)
[ 32.382982] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 32.382989] pc : clk_branch_wait+0x13c/0x154
[ 32.382994] lr : clk_branch_wait+0x13c/0x154
[ 32.382999] sp : ffff8000850f3940
[ 32.383002] x29: ffff8000850f3940 x28: 0000000000000004 x27: 0000000000000000
[ 32.383010] x26: ffff000011cb04f4 x25: 0000000000000000 x24: 0000000000000000
[ 32.383019] x23: ffff800080e294a8 x22: 0000000000000001 x21: ffff8000805f0684
[ 32.383027] x20: 0000000000000000 x19: ffff8000812641d8 x18: fffffffffffe9ac0
[ 32.383035] x17: 000000040044ffff x16: 00500072b5503510 x15: 0000000000000040
[ 32.383043] x14: 0000000000000000 x13: ffff8000811cf408 x12: 00000000000006de
[ 32.383051] x11: 000000000000024a x10: ffff80008122aaf8 x9 : ffff8000811cf408
[ 32.383059] x8 : 00000000ffffefff x7 : ffff800081227408 x6 : 000000000000024a
[ 32.383068] x5 : 0000000000000000 x4 : 40000000fffff24a x3 : 0000000000000000
[ 32.383076] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000046e78e80
[ 32.383085] Call trace:
[ 32.383088] clk_branch_wait+0x13c/0x154
[ 32.383093] clk_branch2_enable+0x30/0x40
[ 32.383099] clk_core_enable+0x6c/0xac
[ 32.383107] clk_enable+0x2c/0x4c
[ 32.383113] vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core]
[ 32.383163] venc_power_v3+0x9c/0xa0 [venus_core]
[ 32.383188] venc_runtime_resume+0x24/0x38 [venus_enc]
[ 32.383201] pm_generic_runtime_resume+0x2c/0x44
[ 32.383211] __genpd_runtime_resume+0x30/0x80
[ 32.383218] genpd_runtime_resume+0x110/0x268
[ 32.383225] __rpm_callback+0x48/0x1d8
[ 32.383230] rpm_callback+0x6c/0x78
[ 32.383234] rpm_resume+0x488/0x6ac
[ 32.383238] __pm_runtime_resume+0x50/0x94
[ 32.383244] venc_pm_get.isra.0+0x38/0xb4 [venus_enc]
[ 32.383253] venc_close+0x28/0xa4 [venus_enc]
[ 32.383261] v4l2_release+0xe4/0xec [videodev]
[ 32.383339] __fput+0xb4/0x270
[ 32.383348] ____fput+0x10/0x1c
[ 32.383354] task_work_run+0x74/0xcc
[ 32.383362] do_notify_resume+0x204/0x12ac
[ 32.383371] el0_svc+0x74/0x84
[ 32.383380] el0t_64_sync_handler+0x120/0x12c
[ 32.383387] el0t_64_sync+0x190/0x194
[ 32.383393] ---[ end trace 0000000000000000 ]---
[ 32.383514] qcom-venus-encoder 1d00000.venus:video-encoder: Runtime PM usage count underflow!
[ 32.506146] qcom-venus-encoder 1d00000.venus:video-encoder: Runtime PM usage count underflow!
[ 32.533618] qcom-venus-encoder 1d00000.venus:video-encoder: Runtime PM usage count underflow!
[ 37.500900] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10bdb] not expecting rsp
[ 37.838710] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.838738] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.838744] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.838819] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972050] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972202] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972212] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972389] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972400] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972644] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972654] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 37.972661] q6asm-dai c200000.remoteproc:smd-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
[ 339.259347] PM: suspend entry (s2idle)
[ 339.260071] Filesystems sync: 0.000 seconds
[ 339.262105] Freezing user space processes
[ 339.491348] Freezing user space processes completed (elapsed 0.229 seconds)
[ 339.491387] OOM killer disabled.
[ 339.491395] Freezing remaining freezable tasks
[ 339.493392] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 339.493405] printk: Suspending console(s) (use no_console_suspend to debug)
[ 339.798201] OOM killer enabled.
[ 339.798215] Restarting tasks ... done.
[ 339.802989] random: crng reseeded on system resumption
[ 341.558208] PM: suspend exit
[ 341.651933] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 455.458049] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 455.458375] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 455.458563] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230f665 hci version 0x100 quirks 0x0000000002000010
[ 455.458603] xhci-hcd xhci-hcd.1.auto: irq 68, io mem 0x07000000
[ 455.458749] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 455.458763] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 455.458777] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 455.459838] hub 1-0:1.0: USB hub found
[ 455.459872] hub 1-0:1.0: 1 port detected
[ 455.460238] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 455.461092] hub 2-0:1.0: USB hub found
[ 455.461143] hub 2-0:1.0: 1 port detected
[ 456.797323] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 456.996956] hub 1-1:1.0: USB hub found
[ 456.997234] hub 1-1:1.0: 4 ports detected
[ 457.797374] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd
[ 458.058945] input: SEM USB Keyboard as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:1A2C:2124.0001/input/input5
[ 458.119809] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-xhci-hcd.1.auto-1.1/input0
[ 458.125974] input: SEM USB Keyboard Consumer Control as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input6
[ 458.186287] input: SEM USB Keyboard System Control as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input7
[ 458.187172] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-xhci-hcd.1.auto-1.1/input1
[ 458.321685] usb 1-1.3: new full-speed USB device number 4 using xhci-hcd
[ 458.599517] input: Razer Razer DeathAdder Essential as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:1532:006E.0003/input/input8
[ 458.600602] hid-generic 0003:1532:006E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder Essential] on usb-xhci-hcd.1.auto-1.3/input0
[ 458.604589] input: Razer Razer DeathAdder Essential Keyboard as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:1532:006E.0004/input/input9
[ 458.662102] input: Razer Razer DeathAdder Essential as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:1532:006E.0004/input/input10
[ 458.663101] hid-generic 0003:1532:006E.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathAdder Essential] on usb-xhci-hcd.1.auto-1.3/input1
[ 458.665672] input: Razer Razer DeathAdder Essential as /devices/platform/soc@0/70f8800.usb/7000000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.2/0003:1532:006E.0005/input/input11
[ 458.726816] hid-generic 0003:1532:006E.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder Essential] on usb-xhci-hcd.1.auto-1.3/input2
[ 528.791921] wlan0: authenticate with 02:3e:40:c9:cf:93
[ 528.851706] wlan0: send auth to 02:3e:40:c9:cf:93 (try 1/3)
[ 528.852450] wlan0: authenticated
[ 528.861374] wlan0: associate with 02:3e:40:c9:cf:93 (try 1/3)
[ 528.862472] wlan0: RX AssocResp from 02:3e:40:c9:cf:93 (capab=0x531 status=0 aid=12)
[ 528.898562] wlan0: associated
[ 559.819982] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 567.875776] usb 1-1: USB disconnect, device number 2
[ 567.875812] usb 1-1.1: USB disconnect, device number 3
[ 567.905836] xhci-hcd xhci-hcd.1.auto: remove, state 4
[ 567.905872] usb usb2: USB disconnect, device number 1
[ 567.906744] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
[ 567.906763] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 567.906776] usb usb1: USB disconnect, device number 1
[ 572.893374] xhci-hcd xhci-hcd.1.auto: xHCI host not responding to stop endpoint command
[ 572.923651] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead
[ 573.126379] usb 1-1.3: USB disconnect, device number 4
[ 573.461586] xhci-hcd xhci-hcd.1.auto: USB bus 1 deregistered
[ 1172.240828] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
[ 1174.257537] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
Executing that cat /sys/devices/platform/soc@0/78b7000.i2c/i2c-2/2-0038/name
gives output:
edt-ft5406
Edited by Soupborsh FOSS user