Merge tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.10

Support for Sony Xperia 1V, on the SM8550 platform, is added.

On IPQ8074, UART6 is described and unused gpios from QPIC are removed.

Backlight and touchscreen are described on Samsung Grand Prime devices.

RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.

Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.

On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.

USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.

The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.

The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.

For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.

For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.

USB Type-C handling is introduce for Fairphone FP3 as well.

On SM6350 crypto engine and DisplayPort controllers are introduced.

WiFi is enabled on the SM8150 Hardware Development Kit (HDK)

USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.

Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.

On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.

The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.

On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.

Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.

The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.

A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.

A number of DeviceTree binding validation issues are corrected.

* tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits)
  dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
  arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
  arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
  arm64: dts: qcom: ipq6018: Add PCIe bridge node
  arm64: dts: qcom: ipq8074: Add PCIe bridge node
  arm64: dts: qcom: msm8996: Add PCIe bridge node
  arm64: dts: qcom: sc8180x: Add PCIe bridge node
  arm64: dts: qcom: qcs404: Add PCIe bridge node
  arm64: dts: qcom: sc7280: Add PCIe bridge node
  arm64: dts: qcom: msm8998: Add PCIe bridge node
  arm64: dts: qcom: sc8280xp: Add PCIe bridge node
  arm64: dts: qcom: sa8775p: Add PCIe bridge node
  arm64: dts: qcom: sm8650: Add PCIe bridge node
  arm64: dts: qcom: sm8550: Add PCIe bridge node
  arm64: dts: qcom: sm8450: Add PCIe bridge node
  arm64: dts: qcom: sm8350: Add PCIe bridge node
  arm64: dts: qcom: sm8150: Add PCIe bridge node
  arm64: dts: qcom: sdm845: Add PCIe bridge node
  arm64: dts: qcom: sm8250: Add PCIe bridge node
  arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on
  ...

Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>