Skip to content

Add Hirose FH26 series 3D models

Greg M requested to merge (removed):hirose-fh26-series into master

Thanks for creating a pull request to contribute to the KiCad libraries! Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers website cannot be accepted.

To speed up integration of your PR, please check the following items as you complete them:

  • A screenshot of the model(s) aligned with KiCad footprint(s)
  • Source files are contributed on the apropriate location
  • Step model submitted in 1:1 scale
  • WRL model submitted in 1:2.54 scale
  • 3D model alignment checked against KiCad footprint
  • WRL model uses correct material properties
  • Geometry check performed on the model

Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).

FreeCAD: image

KiCAD: image

Hirose FH26 series FPC/FFC connectors

The series datasheet:

https://www.hirose.com/en/product/document?clcode=&productname=&series=FH26&documenttype=Catalog&lang=en&documentid=D49355_en

https://www.mouser.com/datasheet/2/185/FH26_catalog-939414.pdf

FH26 series doesn't have 19-pin connector. FH26W series doesn't have 55-pin connector.

This merge request contains all the series including 19 and 55-pin connectors. FH26W is a halogen-free version of FH26, but the same mechanical dimensions.

Parametric FreeCAD file: kicad-packages3D-source!369 (merged)

Footprint generator script: kicad-footprint-generator!885 (closed)

Footprints: kicad-footprints!3137 (closed)

Edited by Greg M

Merge request reports