Skip to content

Added 3D models for Wago connectors type 734-xxx, horizontal and vertical type.

Joerg Laukemper requested to merge MountyRox/kicad-packages3D:mr_connector_wago734 into master

The 3D models were created with Python script files. For these files a PR was launched:
https://github.com/easyw/kicad-3d-models-in-freecad/pull/408

Following files will be added (click to fold/unfold):

Vertical connectors
  • Wago_734-132_1x02_P3.50mm_Vertical
  • Wago_734-133_1x03_P3.50mm_Vertical
  • Wago_734-134_1x04_P3.50mm_Vertical
  • Wago_734-135_1x05_P3.50mm_Vertical
  • Wago_734-136_1x06_P3.50mm_Vertical
  • Wago_734-137_1x07_P3.50mm_Vertical
  • Wago_734-138_1x08_P3.50mm_Vertical
  • Wago_734-139_1x09_P3.50mm_Vertical
  • Wago_734-140_1x10_P3.50mm_Vertical
  • Wago_734-141_1x11_P3.50mm_Vertical
  • Wago_734-142_1x12_P3.50mm_Vertical
  • Wago_734-143_1x13_P3.50mm_Vertical
  • Wago_734-144_1x14_P3.50mm_Vertical
  • Wago_734-146_1x16_P3.50mm_Vertical
  • Wago_734-148_1x18_P3.50mm_Vertical
  • Wago_734-150_1x20_P3.50mm_Vertical
  • Wago_734-154_1x24_P3.50mm_Vertical
Horizontal connectors
  • Wago_734-162_1x02_P3.50mm_Horizontal
  • Wago_734-163_1x03_P3.50mm_Horizontal
  • Wago_734-164_1x04_P3.50mm_Horizontal
  • Wago_734-165_1x05_P3.50mm_Horizontal
  • Wago_734-166_1x06_P3.50mm_Horizontal
  • Wago_734-167_1x07_P3.50mm_Horizontal
  • Wago_734-168_1x08_P3.50mm_Horizontal
  • Wago_734-169_1x09_P3.50mm_Horizontal
  • Wago_734-170_1x10_P3.50mm_Horizontal
  • Wago_734-171_1x11_P3.50mm_Horizontal
  • Wago_734-172_1x12_P3.50mm_Horizontal
  • Wago_734-173_1x13_P3.50mm_Horizontal
  • Wago_734-174_1x14_P3.50mm_Horizontal
  • Wago_734-176_1x16_P3.50mm_Horizontal
  • Wago_734-178_1x18_P3.50mm_Horizontal
  • Wago_734-180_1x20_P3.50mm_Horizontal
  • Wago_734-184_1x24_P3.50mm_Horizontal

Here are some screenshots of the models from KiCad 3D viewer:
132 (2 pins vertical)
133 (3 pins vertical)

133_bot (bottom view)

140 (10 pins vertical) 154 (24 pins vertical)
162 (2 pins horizontal)
163 (3 pins horizontal)
170 (10 pins horizontal) 184 (24 pins horizontal)

  • A screenshot of the model(s) aligned with KiCad footprint(s)
  • Source files are contributed on the apropriate location
  • Step model submitted in 1:1 scale
  • WRL model submitted in 1:2.54 scale
  • 3D model alignment checked against KiCad footprint
  • WRL model uses correct material properties
  • Geometry check performed on the model

Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).

Merge request reports