Added Altech AK300 serie
Created by: Misca1234
This the push of Altech AK300 serie http://www.altechcorp.com/PDFS/PCBMETRC.PDF
All foot prints and 3D models are script made
Foot print push https://github.com/KiCad/kicad-footprints/pull/1155
Foot print script push https://github.com/pointhi/kicad-footprint-generator/pull/236
3D model push https://github.com/KiCad/kicad-packages3D/pull/478
3D model script push https://github.com/easyw/kicad-3d-models-in-freecad/pull/242
Parameter file foot prints
AK300:
description: "Altech AK300 serie connector"
datasheet: "http://www.altechcorp.com/PDFS/PCBMETRC.PDF"
tags: "Altech AK300 serie connector"
manufacture: 'Altech' # Model name
serie: 'AK300' # Model name
W: 12.5 # Package width
H: 12.5 # Package height
WD: 6.5 # > Y distance form pin center to package edge
A1: 0.1 # package board seperation
pin_number: [ 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24] # Which pin configuration
PE: 2.5 # Distance from edge to pin
PS: 5.0 # Distance between pins
PD: [1.0, 0.8] # Pin size, [1.0] diameter 1 mm, [1.0, 0.8] rectangle 1.0x0.8
PL: 4.5 # Pin length
PF: 'rect' # Pin form 'round' or 'rect'
SW: 2.7 # Blender width
DD: 1.5 # Drill diameter
PD: 3.0 # Pad diameter
rotation: 0 # Rotation if required
dest_dir_3D_prefix: 'Connector_Altech.3dshapes' # Destination directory
Parameter file 3D model
'AK300': Params( # ModelName
#
#
#
manufacture = 'Altech', # Model name
serie = 'AK300', # Model name
W = 12.5, # Package width
H = 12.5, # Package height
WD = 6.5, # > Y distance form pin center to package edge
A1 = 0.1, # package board seperation
pin_number = [ 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24], # Which pin configuration
PE = 2.5, # Distance from edge to pin
PS = 5.0, # Distance between pins
PD = [1.0, 0.8], # Pin size, [1.0] diameter 1 mm, [1.0, 0.8] rectangle 1.0x0.8
PL = 4.5, # Pin length
PF = 'rect', # Pin form 'round' or 'rect'
SW = 2.7, # Blender width
rotation = 0, # Rotation if required
body_color_key = 'black body', # Body color
pin_color_key = 'metal grey pins', # Pin color
dest_dir_prefix = 'Connector_Altech.3dshapes' # Destination directory
),
Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items as you complete them:
-
A screenshot of the model(s) aligned with KiCad footprints is very useful -
Was the 3D model(s) created in a mechanical modelling program? -
Source files (or scripts) have been contributed -
Step model submitted in 1:1 scale -
WRL model submitted in 1:2.54 scale -
3D model alignment checked against KiCad footprint -
WRL model uses correct material properties -
Geometry check performed against mechanical models