Skip to content

Add: Wuerth 7999010211A RJ45 magjack

John Beard requested to merge johnbeard/kicad-footprints:we_7499010211a into master

This adds the Wuerth 7999010211A RJ45 magjack

https://www.we-online.com/components/products/datasheet/7499010211A.pdf

image.png

image.png

Pad is radius 1.2, so courtyard is >=1.7

image.png

image.png image.png image.png

image.png

WE STEP:

Download_STP_7499010211A_rev1.stp / https://www.we-online.com/components/products/download/7499010211A%20%28rev1%29.stp

Keepouts

Keepouts are added to avoid accidental contact between the shield and vias, tracks, etc.

The shield "danger zone" by the locating pins is (per the 3D model, which looks very like the physical part) 1.90mm on each side, and do not reach the pin midline:

image.png

So adding 0.25mm clearance:

image.png

The shield at the front extends inwards 2.70mm:

image.png

Add a clearance that should always be a safe keepout (the nodes are on the 0.1mm grid, but the fab outline is not, so it doesn't have a round number, but it's not a critical value as long as it's safe)

image.png

Edited by John Beard

Merge request reports