chore(deps): update dependency coverage to v7.5.4

This MR contains the following updates:

Package	Update	Change
coverage	minor	==7.3.2 -> ==7.5.4

---

Release Notes

nedbat/coveragepy (coverage)

v7.5.4

Compare Source

• If you attempt to combine statement coverage data with branch coverage data, coverage.py used to fail with the message "Can't combine arc data with line data" or its reverse, "Can't combine line data with arc data." These messages used internal terminology, making it hard for people to understand the problem. They are now changed to mention "branch coverage data" and "statement coverage data."

• Fixed a minor branch coverage problem with wildcard match/case cases using names or guard clauses.

• Started testing on 3.13 free-threading (nogil) builds of Python. I'm not claiming full support yet. Closes issue 1799_.

.. _issue 1799: https://github.com/nedbat/coveragepy/issues/1799

.. _changes_7-5-3:

v7.5.3

Compare Source

• Performance improvements for combining data files, especially when measuring line coverage. A few different quadratic behaviors were eliminated. In one extreme case of combining 700+ data files, the time dropped from more than three hours to seven minutes. Thanks for Kraken Tech for funding the fix.

• Performance improvements for generating HTML reports, with a side benefit of reducing memory use, closing issue 1791_. Thanks to Daniel Diniz for helping to diagnose the problem.

.. _issue 1791: https://github.com/nedbat/coveragepy/issues/1791

.. _changes_7-5-2:

v7.5.2

Compare Source

• Fix: nested matches of exclude patterns could exclude too much code, as reported in issue 1779_. This is now fixed.

• Changed: previously, coverage.py would consider a module docstring to be an executable statement if it appeared after line 1 in the file, but not executable if it was the first line. Now module docstrings are never counted as executable statements. This can change coverage.py's count of the number of statements in a file, which can slightly change the coverage percentage reported.

• In the HTML report, the filter term and "hide covered" checkbox settings are remembered between viewings, thanks to Daniel Diniz <pull 1776_>_.

• Python 3.13.0b1 is supported.

• Fix: parsing error handling is improved to ensure bizarre source files are handled gracefully, and to unblock oss-fuzz fuzzing, thanks to Liam DeVoe <pull 1788_>*. Closes issue 1787*.

.. _pull 1776: https://github.com/nedbat/coveragepy/pull/1776 .. _issue 1779: https://github.com/nedbat/coveragepy/issues/1779 .. _issue 1787: https://github.com/nedbat/coveragepy/issues/1787 .. _pull 1788: https://github.com/nedbat/coveragepy/pull/1788

.. _changes_7-5-1:

v7.5.1

Compare Source

• Fix: a pragma comment on the continuation lines of a multi-line statement now excludes the statement and its body, the same as if the pragma is on the first line. This closes issue 754*. The fix was contributed by Daniel Diniz <pull 1773_>*.

• Fix: very complex source files like this one <resolvent_lookup_>_ could cause a maximum recursion error when creating an HTML report. This is now fixed, closing issue 1774_.

• HTML report improvements:

  • Support files (JavaScript and CSS) referenced by the HTML report now have hashes added to their names to ensure updated files are used instead of stale cached copies.

  • Missing branch coverage explanations that said "the condition was never false" now read "the condition was always true" because it's easier to understand.

  • Column sort order is remembered better as you move between the index pages, fixing issue 1766*. Thanks, Daniel Diniz <pull 1768_>*.

.. _resolvent_lookup: https://github.com/sympy/sympy/blob/130950f3e6b3f97fcc17f4599ac08f70fdd2e9d4/sympy/polys/numberfields/resolvent_lookup.py .. _issue 754: https://github.com/nedbat/coveragepy/issues/754 .. _issue 1766: https://github.com/nedbat/coveragepy/issues/1766 .. _pull 1768: https://github.com/nedbat/coveragepy/pull/1768 .. _pull 1773: https://github.com/nedbat/coveragepy/pull/1773 .. _issue 1774: https://github.com/nedbat/coveragepy/issues/1774

.. _changes_7-5-0:

v7.5.0

Compare Source

• Added initial support for function and class reporting in the HTML report. There are now three index pages which link to each other: files, functions, and classes. Other reports don't yet have this information, but it will be added in the future where it makes sense. Feedback gladly accepted! Finishes issue 780_.

• Other HTML report improvements:

  • There is now a "hide covered" checkbox to filter out 100% files, finishing issue 1384_.

  • The index page is always sorted by one of its columns, with clearer indications of the sorting.

  • The "previous file" shortcut key didn't work on the index page, but now it does, fixing issue 1765_.

• The debug output showing which configuration files were tried now shows absolute paths to help diagnose problems where settings aren't taking effect, and is renamed from "attempted_config_files" to the more logical "config_files_attempted."

• Python 3.13.0a6 is supported.

.. _issue 780: https://github.com/nedbat/coveragepy/issues/780 .. _issue 1384: https://github.com/nedbat/coveragepy/issues/1384 .. _issue 1765: https://github.com/nedbat/coveragepy/issues/1765

.. _changes_7-4-4:

v7.4.4

Compare Source

• Fix: in some cases, even with [run] relative_files=True, a data file could be created with absolute path names. When combined with other relative data files, it was random whether the absolute file names would be made relative or not. If they weren't, then a file would be listed twice in reports, as detailed in issue 1752_. This is now fixed: absolute file names are always made relative when combining. Thanks to Bruno Rodrigues dos Santos for support.

• Fix: the last case of a match/case statement had an incorrect message if the branch was missed. It said the pattern never matched, when actually the branch is missed if the last case always matched.

• Fix: clicking a line number in the HTML report now positions more accurately.

• Fix: the report:format setting was defined as a boolean, but should be a string. Thanks, Tanaydin Sirin <pull 1754_>_. It is also now documented on the :ref:configuration page <config_report_format>.

.. _issue 1752: https://github.com/nedbat/coveragepy/issues/1752 .. _pull 1754: https://github.com/nedbat/coveragepy/pull/1754

.. _changes_7-4-3:

v7.4.3

Compare Source

• Fix: in some cases, coverage could fail with a RuntimeError: "Set changed size during iteration." This is now fixed, closing issue 1733_.

.. _issue 1733: https://github.com/nedbat/coveragepy/issues/1733

.. _changes_7-4-2:

v7.4.2

Compare Source

• Fix: setting COVERAGE_CORE=sysmon no longer errors on 3.11 and lower, thanks Hugo van Kemenade <pull 1747_>_. It now issues a warning that sys.monitoring is not available and falls back to the default core instead.

.. _pull 1747: https://github.com/nedbat/coveragepy/pull/1747

.. _changes_7-4-1:

v7.4.1

Compare Source

• Python 3.13.0a3 is supported.

• Fix: the JSON report now includes an explicit format version number, closing issue 1732_.

.. _issue 1732: https://github.com/nedbat/coveragepy/issues/1732

.. _changes_7-4-0:

v7.4.0

Compare Source

• In Python 3.12 and above, you can try an experimental core based on the new :mod:sys.monitoring <python:sys.monitoring> module by defining a COVERAGE_CORE=sysmon environment variable. This should be faster for line coverage, but not for branch coverage, and plugins and dynamic contexts are not yet supported with it. I am very interested to hear how it works (or doesn't!) for you.

.. _changes_7-3-4:

v7.3.4

Compare Source

• Fix: the change for multi-line signature exclusions in 7.3.3 broke other forms of nested clauses being excluded properly. This is now fixed, closing issue 1713_.

• Fix: in the HTML report, selecting code for copying won't select the line numbers also. Thanks, Robert Harris <pull 1717_>_.

.. _issue 1713: https://github.com/nedbat/coveragepy/issues/1713 .. _pull 1717: https://github.com/nedbat/coveragepy/pull/1717

.. _changes_7-3-3:

v7.3.3

Compare Source

• Fix: function definitions with multi-line signatures can now be excluded by matching any of the lines, closing issue 684*. Thanks, Jan Rusak, Maciej Kowalczyk and Joanna Ejzel <pull 1705_>*.

• Fix: XML reports could fail with a TypeError if files had numeric components that were duplicates except for leading zeroes, like file1.py and file001.py. Fixes issue 1709_.

• The coverage annotate command used to announce that it would be removed in a future version. Enough people got in touch to say that they use it, so it will stay. Don't expect it to keep up with other new features though.

• Added new :ref:debug options <cmd_run_debug>:

  • pytest writes the pytest test name into the debug output.

  • dataop2 writes the full data being added to CoverageData objects.

.. _issue 684: https://github.com/nedbat/coveragepy/issues/684 .. _pull 1705: https://github.com/nedbat/coveragepy/pull/1705 .. _issue 1709: https://github.com/nedbat/coveragepy/issues/1709

.. _changes_7-3-2:

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever MR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this MR and you won't be reminded about this update again.

---

• If you want to rebase/retry this MR, check this box

---

This MR has been generated by Renovate Bot.