serial

A small library to make reading and interfacing with the Garmin Simple Text Output Protocol easier.

Serial port library for node using pure JS.

Serial communication tool written in Python 3

This is a higher level API (or HAL) for using the serial port (USART1, USART2, USAR3, etc.), intially developed on the Blue Pill (STM32F103C8) with libOpenCM3.

Wrapper to ease device-to-device serial communication.

Prevent DTR line changes (and Arduino reset) when serial port gets opened by patching Linux serial modules.

An unofficial command line program which can control the DDS Signal Generator and Counter device known as the "Koolertron Upgraded 60MHz DDS Signal Generator Counter", cross-platform and written in Rust. https://crates.io/crates/signal-gen-cjds66-lib

c-kermit: C-Kermit for UNIX (CKU) with local modifications/customizations. Upstream homepage: https://www.kermitproject.org/

ecu: 'Extended Call Utility' is a research and engineering asynchronous serial and telnet communications program, originally written for users of SCO UNIX V.3.2/386 and XENIX V/286 systems.

RS232 to TTL level shifter with line driver UT232A

Quick project to send incoming post data via serial port to thermal printer

Upload Arbitrary Waveforms to the GH-CJDS66 60MHz Signal Generator from Linux (proof-of-concept). For a better full-control program that's cross-platform, see: https://gitlab.com/defcronyke/signal-gen-cjds66

Provides a gen_serial module for communicating with RS-232 serial devices from Erlang. The interface provided is similar to the gen_tcp module distributed with Erlang.

Command line interface for streaming data to/from a serial port

Cross-platform, Serial Port library written in C++

A simple Arduino project to receive and/or broadcast 315MHz or 433MHz signals via commands from a serial connection.

Arduino Transfer Data via Serial. For example, a struct or object.

serialsimple, aplicacion para aprender usar el RS-232 simple library

ROS packages containing firmware and ROS-nodes to set up a ROS<->CAN-Interface.

This is a basic serial terminal I/O library for OSX and Linux that allows you to set the baud rate without using cgo.