... | ... | @@ -2,15 +2,12 @@ This is a compact remote control with 128x32 telemetry rear-mounted display for |
|
|
It uses both PPM (analog) and UART as control mode for tuning <span dir="">the throttle </span>curve and ramping time.\
|
|
|
\
|
|
|
\
|
|
|
<img src="uploads/f65114f6e4da5cec6a30e56892c80424/small1.jpg" width="250" height="250">
|
|
|
<img src="uploads/2aa90b6262b7d0154b1483eca0434056/small2.jpg" width="250" height="250">
|
|
|
<img src="uploads/ce4c1e770bda61b4f6caa9b1fe0a50db/small3.jpg" width="250" height="250">
|
|
|
<img src="uploads/662b8fbc7be69904b5ca502d81e8e4ec/small1.jpg" width="250" height="250"><img src="uploads/5b4dc86b5bea37eda5a852935ee45177/small2.jpg" width="250" height="250"><img src="uploads/867f465d6604019eba28fd5b392168b8/small3.jpg" width="250" height="250">
|
|
|
\
|
|
|
\
|
|
|
\
|
|
|
The remote can add up to 3+ multiple profiles to allow switching between different VESC devices. Also the remote receiver firmware requires a custom library dependency to run VESC HW 4.10+ (_Tested with HW4.10 and FSESC 6.6 Dual_).
|
|
|
\
|
|
|
The remote can add up to 3+ multiple profiles to allow switching between different VESC devices. Also the remote receiver firmware requires a custom library dependency to run VESC HW 4.10+ (_Tested with HW4.10 and FSESC 6.6 Dual_). \
|
|
|
The firmware is fully customizable with additional safety function. \
|
|
|
\
|
|
|
\
|
|
|
<img src="uploads/7392fd79b56c46968b9417ac9d25f287/Setting.png" width="600" height="300"> |
|
|
\ No newline at end of file |
|
|
<img src="uploads/cccc06d4f3822b0008aa9c3066851ecf/Setting.png" width="600" height="300"> |
|
|
\ No newline at end of file |