... | ... | @@ -19,6 +19,7 @@ The objective is to produce a system that confine the respiratory flow environme |
|
|
![schema_anglais_v3_portable](uploads/23b04c6c97e35d87764da3990b19c5e2/schema_anglais_v3_portable.png)
|
|
|
|
|
|
Bubble composition:
|
|
|
|
|
|
* Transparent canvas + Structure;
|
|
|
* Clips (settings and emergency access in less than 5s);
|
|
|
* Extracting connector;
|
... | ... | @@ -26,14 +27,14 @@ Bubble composition: |
|
|
* Medical standards adapted piping.
|
|
|
|
|
|
Mobile extracting system composition:
|
|
|
|
|
|
* Pump;
|
|
|
* Battery;
|
|
|
* Electronic devices;
|
|
|
* Medicial standards adapted piping.
|
|
|
|
|
|
<p>
|
|
|
Validation of the idea has been made with an experiment representing a severe risk of contamination: an open nebulizer has thus been used as particles generator. The Cirrus 2 (Intersurgical ©, France) nebulizer was issued by a 9 L/min oxygen flow. Particles count, at 1m far from the patient, has been done thanks to an industrial laser counter usually used in white rooms with a particle size sensitivity from 0.3 to 25 μm (Lasair III, Particle Measuring Systems ©, CO, USA). Particles diffusion and filtration has been clearly observed.
|
|
|
</p>
|
|
|
Validation of the idea has been made with an experiment representing a severe risk of contamination: an open nebulizer has thus been used as particles generator. The Cirrus 2 (Intersurgical ©, France) nebulizer was issued by a 9 L/min oxygen flow. Particles count, at 1m far from the patient, has been done thanks to an industrial laser counter usually used in white rooms with a particle size sensitivity from 0.3 to 25 μm (Lasair III, Particle Measuring Systems ©, CO, USA). Particles diffusion and filtration has been clearly observed.
|
|
|
|
|
|
|
|
|
<div align="center">
|
|
|
![EN_preliminary_particles_graph](uploads/7e72fd45ffe52dd6218d263672f460c5/EN_preliminary_particles_graph.png)
|
... | ... | @@ -46,6 +47,7 @@ Validation of the idea has been made with an experiment representing a severe ri |
|
|
This work is supported by [Universite Integree Grenoble Alpes](https://edu.univ-grenoble-alpes.fr/) and its laboratories.
|
|
|
|
|
|
Special thanks for their help in this project:
|
|
|
|
|
|
* [LEGI](http://www.legi.grenoble-inp.fr/web/)
|
|
|
* [LOG](https://www.logre.eu/)
|
|
|
* [Mondial Tissu Grenoble](https://www.mondialtissus.fr/)
|
... | ... | |