... | ... | @@ -83,17 +83,21 @@ NEW in v0.2 |
|
|
### Build Instructions
|
|
|
|
|
|
[LCAEV_Assembly_Instructions.pdf](uploads/a6e84f77ee6a3ce6cd33c2e09933d5db/LCAEV_Assembly_Instructions.pdf)
|
|
|
|
|
|
* these need to be updated...
|
|
|
|
|
|
1. Order parts
|
|
|
1. Print components
|
|
|
* 2x: LCAEV_spur_gear (print at 100% infill PETG, 3 walls)
|
|
|
* 2x: LCAEV_piston (print at 25% infill PLA, 3 walls)
|
|
|
* 2x: LCAEV_base_half (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV_bag_connector (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV_base_connector (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV_screen_support (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV_electronics_housing (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV-0.2_bag_connector (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV-0.2_base_connector (print at 25% infill PLA, 3 walls)
|
|
|
* 2x: LCAEV-0.2_base_half (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV-0.2_electronics_housing (print at 25% infill PLA, 3 walls)
|
|
|
* 2x: LCAEV-0.2_piston (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV-0.2_screen_support (print at 25% infill PLA, 3 walls)
|
|
|
* 2x: LCAEV-0.2_spur_gear (print at 100% infill PETG, 3 walls)
|
|
|
* Optional:
|
|
|
* 1x: LCAEV-0.2_handle (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV-0.2_sensor_housing (optional) (print at 25% infill PLA, 3 walls)
|
|
|
1. Set up computer
|
|
|
* write latest raspbian to sd card using the Raspberry Pi 'Imager' application
|
|
|
* insert card into pi and boot (connect to power and peripherals)
|
... | ... | |