... | ... | @@ -98,7 +98,11 @@ NEW in v0.2 |
|
|
* 1x: LCAEV-0.2_handle (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV-0.2_sensor_housing (print at 25% infill PLA, 3 walls)
|
|
|
1. Set up computer
|
|
|
* write latest raspbian to sd card using the Raspberry Pi 'Imager' application (link: https://www.raspberrypi.org/documentation/installation/installing-images/README.md)
|
|
|
* write latest raspbian to sd card using the Raspberry Pi 'Imager' application
|
|
|
* link: https://www.raspberrypi.org/documentation/installation/installing-images/README.md
|
|
|
* Download the Imager application and follow the steps to load the operating system onto the SD card
|
|
|
* If your machine does not have an SD card reader you may need an external one.
|
|
|
* This (or something similar) will suffice: https://www.amazon.com/Rocketek-Memory-Reader-Writer-Build/dp/B00IX9ZDKC?ref_=fsclp_pl_dp_4
|
|
|
* insert card into pi and boot (connect to power and peripherals)
|
|
|
* walk through the pi setup prompts that appear at the first boot (be sure to connect to the internet)
|
|
|
* clone this repository
|
... | ... | |