... | ... | @@ -77,10 +77,15 @@ This project, both hardware and software, is available to all for use without re |
|
|
* 1x: LCAEV_screen_support (print at 25% infill PLA, 3 walls)
|
|
|
* 1x: LCAEV_electronics_housing (print at 25% infill PLA, 3 walls)
|
|
|
1. Set up computer
|
|
|
* write latest raspbian to sd card
|
|
|
* insert card into pi and boot
|
|
|
* clone repository
|
|
|
* write latest raspbian to sd card using the Raspberry Pi 'Imager' application
|
|
|
* insert card into pi and boot (connect to power and peripherals)
|
|
|
* walk through the pi setup prompts that appear at the first boot (be sure to connect to the internet)
|
|
|
* clone this repository
|
|
|
* git clone git@gitlab.com:PerAsperaAdAstra/lcaev.git
|
|
|
* run the setup/install.py file and follow its instructions
|
|
|
* cd lcaev/setup
|
|
|
* python3 install.py
|
|
|
* restart the pi to verify the GUI comes up as expected
|
|
|
1. Gently hammer the spur gears onto the stepper motor spindles
|
|
|
1. Glue the base tabs and mate
|
|
|
1. Align the base connector with the half-ring cutouts and attach with zip ties
|
... | ... | |