-
1.7-beta21
- Fixed a issues causing the controls to reload when the app is reopened, causing a reconnection of the webcam after a couple of ms potentially leaking a webcam stream - Fixed a issues causing the webcam stream to reconnect after a second of reopening the app, potentially leaking a webcam connection
-
1.7-beta20
- Prevent the app from opening multiple parallel connections to the webcam, leaking old connections - Added the "Open terminal" menu item back which vanished at some point in the past... - Added a brief explanation to the emergency stop dialog to prevent confusion about what it's doing
-
1.7-beta19
- Refined reordering of widgets - Allow widgets to be hidden
-
1.7-beta18
- Allow widgets in print and prepare screen to be reordered by Drag & Drop - A lot of small bug fixes. Thanks all for reporting!
-
-
1.7-beta16
- Completely new UI layout system, this removed the grid layout for tablet for now but results in higher performance - New cache system for Gcode files. Files are now cached and loaded by layer massively reducing the amount of RAM used and speeding speeding up the loading time from cache. Also, Gcode now uses around 40% less disk space to cache.
-
1.7-beta15
- Cache Gcode by layer, reducing RAM usage drastically - Fix "turn PSU on" button not showing up
-
1.7-beta13
- Fixed bug in Gcoed viewer prevent some files to be loaded
-
1.7-beta12
- Support for IJ form arcs in Gcode preview (Arc welder) - Changes from 1.6.11
-
1.7-beta11
- Improved caching of state so the app will reopen quicker during a print, usually instantly snapping open with all data visible - Improved messaging in connect state for network issues
-
-
-
1.6.10
- Fixed a common crash introduced with 1.6.9 - Some minor fixes
-
1.7-beta09
- Changes from 1.6.9
-
1.6.9
- Fixed a issue causing the print notification to disconnect when the devices enters deep sleep - Fixed a issue where the wrong date/time format could be used (e.g. 12h instead of 24h) - Fixed a issue causing Gcode files with arcs (e.g. Arc Welder) to not properly update in the Gcode viewer - Fixed a issue causing the layer number in the fullscreen Gcode preview to be ahead by one - Added preliminary support for arcs, interpolating them as one line in red color
-
-
-
1.7-beta07
- Changes from 1.6.7 - Empty states for power devices and materials - New execution of tasks in the menu, now keeps the menu open so the next action can be pressed right away - Better success feedback for menu items
-
1.6.7
- Fixed a issue causing the webcam to not show up on the first start of the app
-
1.7-beta06
- Rolled back changes to the streaming stack as they proved ineffective. This solves some problem with the streaming in 1.7 beta versions - Added a empty state for the power device menu - Add support for multicam plugin - Changes from 1.6.6