L

led

led-heart | Project EE1

Pyramid Mood Light from PartyFunLights.com - analysis and modification project

Control the brightness of backlight and keyboard LED devices on Linux.

This project is a scalable, web based LED control platform I developed for my fathers model railway buildings. The main goal was to easily control a few hundred LEDs (on/off, dimming 0% - 100%), grouping some together and randomly turning some LEDs or groups on or off to create a lifelike simulation.

Simple C software that monitors keyboard layout change - to toggle audio LED on laptop Lenovo Thinipad T430. Bonus: mute the audio :)

High-Power, Multi-Channel, ESP32-Based LED Controller for Smart Homes

A modern C++ library for using the GPIOs of a Raspberry Pi to control peripherals like LEDs, Servos, Relays etc.

natural breathing pattern for an led-strip

C/C++ GNU/Linux kernel module to drive via SPI a MAX7219 controlled chained array of 8x8 led matrices. Currently, only ARMv7 is tested (Olimexino Lime A10 and Raspberry Pi B+ v1.2)

Show the basic controls for the LED on the device Topics: #led #visionary #sample #sick-appspace

Eruption Linux user-mode input and LED driver for keyboards, mice and other devices

Almost all my arduino projects

This tutorial details the setup of a Rust development environment on the ESP32C3 RISC-V microcontroller in under an hour, enabling the use of the Rust Standard Library ("std") as well as the MCU's Wi-Fi and Bluetooth capabilities.

This tutorial details how to use Rust's Vec and HashMap collections on the BBC micro:bit's ARM Cortex-M4F microcontroller in under an hour, enabling the use of the Rust Standard Library ("std").

Instalación y librerías personalizadas para display de 7 segmentos (8 dígitos) con el chip MAX7219 en Raspberry y Raspbian Estable

Tap detection based on piezo. Once event detected (double tap), power output enable PWM, which can drive LED strip for example.

Did you changed regular bulbs by LED, but they shine bit too much? This is the solution! Reduce output power through energy efficient PWM driver!

Node-RED flow for OSRAM or similar IR LEDs to control with Home Assistant and MQTT via Broadlink RM devices