Commit 9f488aff authored by Etienne Allovon's avatar Etienne Allovon

Tidy Interconnection page: remove Simonics page and rename Operator to Provider

parent 71bda774
......@@ -6,20 +6,11 @@ Interconnections
:maxdepth: 1
two_xivo
xivo_with_known_sip_operator
xivo_with_known_sip_provider
xivo_with_any_voip_provider
xivo_with_pbx
Specific VoIP providers
=======================
.. toctree::
:maxdepth: 1
simonics
Create an interconnection
=========================
......
.. index:: interconnections/simonics
*****************
Simon Telephonics
*****************
The following configuration is based on the example found `here <http://support.simonics.com/support/solutions/articles/3000033840-asterisk-sip-conf>`_
* username: ``GV18005551212``
* password: ``password``
* exten: ``18005551212``
* host: ``gvgw.simonics.com``
General SIP configuration
=========================
Under :menuselection:`Services --> IPBX --> General settings --> SIP Protocol`.
* General
* Match users with 'username' field: *checked*
.. figure:: images/simonics_sip_general.png
:scale: 85%
Trunk settings
==============
Under :menuselection:`Services --> IPBX --> Trunk management --> SIP Protocol`.
* General
* Name: ``GV18005551212``
* Authentication username: ``GV18005551212``
* Password: ``password``
* Caller ID: ``18005551212``
* Connection type: ``Friend``
* IP Addressing type: ``static``
* ``gvgw.simonics.com``
* Context: ``<your incoming call context>``
.. figure:: images/simonics_trunk_general.png
:scale: 85%
* Register
* Register: ``checked``
* Transport: ``UDP``
* Name: ``GV18005551212``
* Password: ``password``
* Remote Server: ``GV18005551212``
* Contact: ``18005551212``
.. figure:: images/simonics_trunk_register.png
:scale: 85%
* Signaling
* Monitoring: ``Yes``
.. figure:: images/simonics_trunk_signaling.png
:scale: 85%
Outgoing calls
==============
See the :ref:`voip_provider_outcall` section.
Incoming calls
==============
See the :ref:`voip_provider_incall` section.
.. index:: interconnections
*******************************************
Interconnect XiVO with a known SIP operator
Interconnect XiVO with a known SIP Provider
*******************************************
Connection to global telephony network can be configured automatically in this version of XiVO.
......@@ -16,28 +16,28 @@ To enable it, please contact XiVO.Solutions customer support.
Overview
========
The SIP operator configuration can be applied from the SIP Operator page.
The SIP provider configuration can be applied from the SIP provider page.
.. figure:: images/operator_menu.png
.. figure:: images/provider_menu.png
:scale: 85%
On this page, you will not see all the
settings that will be applied, but only those that must be personalised.
.. figure:: images/operator.png
.. figure:: images/provider.png
:scale: 85%
These settings will apply when you save the form:
* SIP trunk with the settings required by the operator will be created
* SIP trunk with the settings required by the provider will be created
* Data entered to the form will be included in the trunk
* If it is required by the operator, other XiVO settings will be changed.
* If it is required by the provider, other XiVO settings will be changed.
These settings can't be reverted by removing the trunk
Installation
============
* Open SIP Operator page from menu :menuselection:`Services --> IPBX --> Trunk management --> SIP Operator`
* Open SIP Provider page from menu :menuselection:`Services --> IPBX --> Trunk management --> SIP Operator`
* Choose operator
* Fill up the form
* Save
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment