Commit 6b78f7e4 authored by Kevin Cole's avatar Kevin Cole

- Show Lulzbot Mini EEPROM settings (M501 output)

parent 6bec0872
......@@ -247,3 +247,51 @@ PrintrBot's firmware... (Under Arch Linux, I have both the
Examining the dumped EEPROM .hex file above seems to indicate that
it's empty: Basically filled with binary 1's (a.k.a. Hex FF, integer
-1, Boolean TRUE).
See [active-configuration.md](active-configuration.md) for a look
which lines are not commented out in Configuration.h.
For comparison, here's what the Lulzbot Mini reports (word wrapped for
sanity):
$ pronsole
WARNING:root:Could not setup DBus for sleep inhibition:
org.freedesktop.DBus.Error.ServiceUnknown: The name
org.freedesktop.ScreenSaver was not provided by any
.service files
WARNING:root:RPC server bound on non-default port 7979
Welcome to the printer console! Type "help" for a list of available commands.
offline> connect /dev/MINI
start
Printer is now online
Marlin 1.1.0.11
Last Updated: 2016-04-27 12:00 | Author: (Aleph Objects Inc., LulzBot Mini)
Compiled: Dec 21 2016
Free Memory: 4404 PlannerBufferBytes: 1232
V23 stored settings retrieved (396 bytes)
Steps per unit:
M92 X100.50 Y100.50 Z1600.00 E833.00
Maximum feedrates (mm/s):
M203 X800.00 Y800.00 Z8.00 E40.00
Maximum Acceleration (mm/s2):
M201 X9000 Y9000 Z100 E1000
Accelerations: P=printing, R=retract and T=travel
M204 P2000.00 R3000.00 T2000.00
Advanced variables: S=Min feedrate (mm/s),
T=Min travel feedrate (mm/s),
B=minimum segment time (ms),
X=maximum XY jerk (mm/s),
Z=maximum Z jerk (mm/s),
E=maximum E jerk (mm/s)
M205 S0.00 T0.00 B20000 X12.00 Z0.40 E10.00
Home offset (mm):
M206 X0.00 Y0.00 Z0.00
PID settings:
M301 P28.79 I1.91 D108.51 C100.00 L20
M304 P294.00 I65.00 D382.00
Filament settings: Disabled
M200 D3.00
M200 D0
Z-Probe Offset (mm):
M851 Z-1.43
MINI PC>
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment