Commit 43052e8c authored by Kevin Cole's avatar Kevin Cole

- Add dfu-programmer and dfu-util links

parent cd013e73
# TAZ v.1.0 Marlin firmware
Last edited by Ubuntourist (ubuntourist@hacdc.org) (kjc) 2019.02.07
Last edited by Ubuntourist (ubuntourist@hacdc.org) (kjc) 2019.02.14
See the [HacDC wiki Lulzbot TAZ 1.0
entry](https://wiki.hacdc.org/index.php?title=Lulzbot_TAZ_1.0)
2019.01.17
Determining which version of the TAZ and connecting to it
---------------------------------------------------------
......@@ -140,7 +138,10 @@ to be "close enough" but the ESTEPS value is still unknown.
BTW, Bobby says the **Y** calibration is **0.24 mm per step**.
As of 2019.02.07... Downloading all the firmware:
Fun with Firmware
-----------------
Downloading all the firmware:
$ wget -r -np -R "index.html*" -e robots=off http://download.lulzbot.com/TAZ/1.0/software/current/firmware/Marlin/Marlin/
......@@ -151,8 +152,6 @@ Hopefully, the arcane details can be ferreted out of the [Marlin
Configuration,h
documentation](http://marlinfw.org/docs/configuration/configuration.html)
2019.02.11
First, `Configuration.h` has ridiculously long lines, now word-wrapped
for sanity.
......@@ -195,3 +194,8 @@ The [LiquidCrystal
library](https://www.arduino.cc/en/Reference/LiquidCrystal), as one
might guess, allows Arduino to control LCDs. Since we don't have
an LCD on this machine, it's currently irrelevant.
In a previous life, I used a tool called `dfu-programmer` to flash a
PrintrBot's firmware... (Under Arch Linux, I have both the
[dfu-programmer](https://dfu-programmer.github.io/) and
[dfu-util](http://dfu-util.sourceforge.net/) packages installed.)
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment