...
 
Commits (6)
......@@ -79,7 +79,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
/* *I*G - eSDHC/eSPI/NAND boot */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX | MAS3_SW | MAS3_SR, 0,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
#endif /* RAMBOOT/SPL */
......
......@@ -147,7 +147,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 17, BOOKE_PAGESZ_2G, 1)
#endif
};
......
......@@ -49,7 +49,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
#endif
......
......@@ -71,7 +71,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
#endif
......
......@@ -67,11 +67,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE,
CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_256M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 9, BOOKE_PAGESZ_256M, 1),
#endif
......
......@@ -81,7 +81,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* 0xf000_0000 64M LBC SDRAM
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 6, BOOKE_PAGESZ_64M, 1),
/*
......
......@@ -48,7 +48,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE,
CONFIG_SYS_LBC_SDRAM_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 2, BOOKE_PAGESZ_64M, 1),
/*
......
......@@ -67,7 +67,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* 0xf000_0000 64M LBC SDRAM
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 4, BOOKE_PAGESZ_64M, 1),
/*
......
......@@ -76,7 +76,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_SYS_RAMBOOT) || \
(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
#endif
......
......@@ -75,12 +75,12 @@ struct fsl_e_tlb_entry tlb_table[] = {
(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
/* **** - eSDHC/eSPI/NAND boot */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
/* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 9, BOOKE_PAGESZ_1G, 1),
#endif
......
......@@ -86,12 +86,12 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_RAMBOOT
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE,
CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 12, BOOKE_PAGESZ_256M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 13, BOOKE_PAGESZ_256M, 1),
#endif
};
......
......@@ -82,7 +82,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
/* *I*G - eSDHC/eSPI/NAND boot */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
#if defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)
......
......@@ -67,7 +67,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_RAMBOOT
/* *I*G - eSDHC boot */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 8, BOOKE_PAGESZ_1G, 1),
#endif
......
......@@ -102,11 +102,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 12, BOOKE_PAGESZ_1G, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 13, BOOKE_PAGESZ_1G, 1)
#endif
/* entry 14 and 15 has been used hard coded, they will be disabled
......
......@@ -102,11 +102,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 12, BOOKE_PAGESZ_1G, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 13, BOOKE_PAGESZ_1G, 1)
#endif
/* entry 14 and 15 has been used hard coded, they will be disabled
......
......@@ -120,11 +120,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 12, BOOKE_PAGESZ_1G, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 13, BOOKE_PAGESZ_1G, 1)
#endif
};
......
......@@ -145,7 +145,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 19, BOOKE_PAGESZ_2G, 1)
#endif
};
......
......@@ -144,7 +144,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#endif
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 19, BOOKE_PAGESZ_2G, 1)
#endif
......
......@@ -139,7 +139,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 19, BOOKE_PAGESZ_2G, 1)
#endif
};
......
......@@ -116,7 +116,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#endif
#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 18, BOOKE_PAGESZ_2G, 1)
#endif
};
......
......@@ -65,7 +65,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_RAMBOOT
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 6, BOOKE_PAGESZ_1G, 1),
#endif
#endif
......
......@@ -66,7 +66,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* 0xf0000000 64M LBC SDRAM First half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 3, BOOKE_PAGESZ_64M, 1),
/*
......@@ -75,7 +75,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
0, 4, BOOKE_PAGESZ_64M, 1),
#endif
......
......@@ -173,7 +173,7 @@ static void setup_serial(void)
serialno = crc32_no_comp(0, low, 8);
serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
snprintf(serialno_str, sizeof(serialno_str), "%llx", serialno);
snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
env_set("cpuid#", cpuid_str);
env_set("serial#", serialno_str);
......
......@@ -634,6 +634,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#ifdef CONFIG_USB_EHCI_HCD
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_EHCI_DESC_BIG_ENDIAN
#endif
#endif
......
......@@ -782,6 +782,7 @@
#ifdef CONFIG_USB_EHCI_HCD
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_DESC_BIG_ENDIAN
#endif
#endif
......