generic-phy.h 7.02 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
/*
 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
 * Written by Jean-Jacques Hiblot  <jjhiblot@ti.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __GENERIC_PHY_H
#define __GENERIC_PHY_H


/**
 * struct phy - A handle to (allowing control of) a single phy port.
 *
 * Clients provide storage for phy handles. The content of the structure is
 * managed solely by the PHY API and PHY drivers. A phy struct is
 * initialized by "get"ing the phy struct. The phy struct is passed to all
 * other phy APIs to identify which PHY port to operate upon.
 *
 * @dev: The device which implements the PHY port.
 * @id: The PHY ID within the provider.
 *
 */
struct phy {
	struct udevice *dev;
	unsigned long id;
};

/*
 * struct udevice_ops - set of function pointers for phy operations
 * @init: operation to be performed for initializing phy (optional)
 * @exit: operation to be performed while exiting (optional)
 * @reset: reset the phy (optional).
 * @power_on: powering on the phy (optional)
 * @power_off: powering off the phy (optional)
 */
struct phy_ops {
	/**
	 * of_xlate - Translate a client's device-tree (OF) phy specifier.
	 *
	 * The PHY core calls this function as the first step in implementing
	 * a client's generic_phy_get_by_*() call.
	 *
	 * If this function pointer is set to NULL, the PHY core will use a
	 * default implementation, which assumes #phy-cells = <0> or
	 * #phy-cells = <1>, and in the later case that the DT cell
	 * contains a simple integer PHY port ID.
	 *
	 * @phy:	The phy struct to hold the translation result.
	 * @args:	The phy specifier values from device tree.
	 * @return 0 if OK, or a negative error code.
	 */
53
	int	(*of_xlate)(struct phy *phy, struct ofnode_phandle_args *args);
54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124

	/**
	 * init - initialize the hardware.
	 *
	 * Hardware intialization should not be done in during probe() but
	 * should be implemented in this init() function. It could be starting
	 * PLL, taking a controller out of reset, routing, etc. This function
	 * is typically called only once per PHY port.
	 * If power_on() is not implemented, it must power up the phy.
	 *
	 * @phy:	the PHY port to initialize
	 * @return 0 if OK, or a negative error code.
	 */
	int	(*init)(struct phy *phy);

	/**
	* exit - de-initialize the PHY device
	*
	* Hardware de-intialization should be done here. Every step done in
	* init() should be undone here.
	* This could be used to suspend the phy to reduce power consumption or
	* to put the phy in a known condition before booting the OS (though it
	* is NOT called automatically before booting the OS)
	* If power_off() is not implemented, it must power down the phy.
	*
	* @phy:	PHY port to be de-initialized
	* @return 0 if OK, or a negative error code
	*/
	int	(*exit)(struct phy *phy);

	/**
	* reset - resets a PHY device without shutting down
	*
	* @phy:	PHY port to be reset
	*
	* During runtime, the PHY may need to be reset in order to
	* re-establish connection etc without being shut down or exit.
	*
	* @return 0 if OK, or a negative error code
	*/
	int	(*reset)(struct phy *phy);

	/**
	* power_on - power on a PHY device
	*
	* @phy:	PHY port to be powered on
	*
	* During runtime, the PHY may need to be powered on or off several
	* times. This function is used to power on the PHY. It relies on the
	* setup done in init(). If init() is not implemented, it must take care
	* of setting up the context (PLLs, ...)
	*
	* @return 0 if OK, or a negative error code
	*/
	int	(*power_on)(struct phy *phy);

	/**
	* power_off - power off a PHY device
	*
	* @phy:	PHY port to be powered off
	*
	* During runtime, the PHY may need to be powered on or off several
	* times. This function is used to power off the PHY. Except if
	* init()/deinit() are not implemented, it must not de-initialize
	* everything.
	*
	* @return 0 if OK, or a negative error code
	*/
	int	(*power_off)(struct phy *phy);
};

125
#ifdef CONFIG_PHY
126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223

/**
 * generic_phy_init() - initialize the PHY port
 *
 * @phy:	the PHY port to initialize
 * @return 0 if OK, or a negative error code
 */
int generic_phy_init(struct phy *phy);

/**
 * generic_phy_init() - de-initialize the PHY device
 *
 * @phy:	PHY port to be de-initialized
 * @return 0 if OK, or a negative error code
 */
int generic_phy_exit(struct phy *phy);

/**
 * generic_phy_reset() - resets a PHY device without shutting down
 *
 * @phy:	PHY port to be reset
 *@return 0 if OK, or a negative error code
 */
int generic_phy_reset(struct phy *phy);

/**
 * generic_phy_power_on() - power on a PHY device
 *
 * @phy:	PHY port to be powered on
 * @return 0 if OK, or a negative error code
 */
int generic_phy_power_on(struct phy *phy);

/**
 * generic_phy_power_off() - power off a PHY device
 *
 * @phy:	PHY port to be powered off
 * @return 0 if OK, or a negative error code
 */
int generic_phy_power_off(struct phy *phy);


/**
 * generic_phy_get_by_index() - Get a PHY device by integer index.
 *
 * @user:	the client device
 * @index:	The index in the list of available PHYs
 * @phy:	A pointer to the PHY port
 *
 * This looks up a PHY device for a client device based on its position in the
 * list of the possible PHYs.
 *
 * example:
 * usb1: usb_otg_ss@xxx {
 *       compatible = "xxx";
 *       reg = <xxx>;
 *   .
 *   .
 *   phys = <&usb2_phy>, <&usb3_phy>;
 *   .
 *   .
 * };
 * the USB2 phy can be accessed by passing index '0' and the USB3 phy can
 * be accessed by passing index '1'
 *
 * @return 0 if OK, or a negative error code
 */
int generic_phy_get_by_index(struct udevice *user, int index,
			     struct phy *phy);

/**
 * generic_phy_get_by_name() - Get a PHY device by its name.
 *
 * @user:	the client device
 * @phy_name:	The name of the PHY in the list of possible PHYs
 * @phy:	A pointer to the PHY port
 *
 * This looks up a PHY device for a client device in the
 * list of the possible PHYs based on its name.
 *
 * example:
 * usb1: usb_otg_ss@xxx {
 *       compatible = "xxx";
 *       reg = <xxx>;
 *   .
 *   .
 *   phys = <&usb2_phy>, <&usb3_phy>;
 *   phy-names = "usb2phy", "usb3phy";
 *   .
 *   .
 * };
 * the USB3 phy can be accessed using "usb3phy", and USB2 by using "usb2phy"
 *
 * @return 0 if OK, or a negative error code
 */
int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
			    struct phy *phy);

224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264
#else /* CONFIG_PHY */

static inline int generic_phy_init(struct phy *phy)
{
	return 0;
}

static inline int generic_phy_exit(struct phy *phy)
{
	return 0;
}

static inline int generic_phy_reset(struct phy *phy)
{
	return 0;
}

static inline int generic_phy_power_on(struct phy *phy)
{
	return 0;
}

static inline int generic_phy_power_off(struct phy *phy)
{
	return 0;
}

static inline int generic_phy_get_by_index(struct udevice *user, int index,
			     struct phy *phy)
{
	return 0;
}

static inline int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
			    struct phy *phy)
{
	return 0;
}

#endif /* CONFIG_PHY */

265 266 267 268 269 270 271 272 273 274 275
/**
 * generic_phy_valid() - check if PHY port is valid
 *
 * @phy:	the PHY port to check
 * @return TRUE if valid, or FALSE
 */
static inline bool generic_phy_valid(struct phy *phy)
{
	return phy->dev != NULL;
}

276
#endif /*__GENERIC_PHY_H */