Commit cb8250fe authored by Ed Swarthout's avatar Ed Swarthout Committed by Wolfgang Denk

fsl_pci_init enable COMMAND_MEMORY if inbound window

Patch 16e23c3f removed PCSRBAR allocation.  But passing zero windows
to pciauto_setup_device has the side effect of not getting
COMMAND_MEMORY set.
Signed-off-by: default avatarEd Swarthout <[email protected]>
parent e9d0d527
......@@ -54,6 +54,7 @@ fsl_pci_init(struct pci_controller *hose)
u8 temp8;
int r;
int bridge;
int inbound = 0;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
pci_dev_t dev = PCI_BDF(busno,0,0);
......@@ -74,6 +75,7 @@ fsl_pci_init(struct pci_controller *hose)
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
(__ilog2(hose->regions[r].size) - 1);
pi++;
inbound = hose->regions[r].size > 0;
} else { /* Outbound */
po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
......@@ -138,6 +140,12 @@ fsl_pci_init(struct pci_controller *hose)
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
if (inbound) {
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
pci_hose_write_config_word(hose, dev, PCI_COMMAND,
temp16 | PCI_COMMAND_MEMORY);
}
#ifndef CONFIG_PCI_NOSCAN
printf (" Scanning PCI bus %02x\n", hose->current_busno);
hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment