Commit 6abd82e1 authored by Sergej Stepanov's avatar Sergej Stepanov Committed by Wolfgang Denk

changes for IDS8247 board support

To get the IDS8247 board working following are done:
 - FCC2 is deactivated
 - FCC1 is activated
 - I2C is activated
 - CFI driver is activated
 - Adapted for use with LIBFDT
Signed-off-by: default avatarSergej Stepanov <Sergej.S[email protected]>
--
parent e60adeac
......@@ -25,6 +25,12 @@
#include <ioports.h>
#include <mpc8260.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <libfdt_env.h>
#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
......@@ -38,12 +44,12 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 COL */
/* PA30 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 CRS */
/* PA29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
/* PA28 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
/* PA27 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
/* PA26 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
/* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */
/* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */
/* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
/* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */
#if defined(CONFIG_SOFT_I2C)
/* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */
......@@ -53,14 +59,14 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */
#endif
/* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */
/* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
/* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
/* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
/* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
/* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
/* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
/* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
/* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
/* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */
/* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */
/* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */
......@@ -79,20 +85,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
/* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
......@@ -123,8 +129,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */
/* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
/* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
/* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */
/* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */
/* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
/* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
......@@ -180,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */
/* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */
/* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* MII_MDIO */
/* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
......@@ -224,7 +230,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or2;
......@@ -315,4 +321,38 @@ nand_init (void)
printf ("%4lu MB\n", totlen >>20);
}
#endif
#endif /* CFG_CMD_NAND */
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
*/
void ft_blob_update(void *blob, bd_t *bd)
{
int ret, nodeoffset = 0;
ulong memory_data[2] = {0};
memory_data[0] = cpu_to_be32(bd->bi_memstart);
memory_data[1] = cpu_to_be32(bd->bi_memsize);
nodeoffset = fdt_find_node_by_path (blob, "/memory");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
sizeof(memory_data));
if (ret < 0)
printf("ft_blob_update): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
printf("ft_blob_update(): cannot find /memory node "
"err:%s\n", fdt_strerror(nodeoffset));
}
}
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup( blob, bd);
ft_blob_update(blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
......@@ -120,6 +120,17 @@
#define CFG_NS16550_COM1 (CFG_UART_BASE + 0x8000)
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define OF_CPU "PowerPC,[email protected]"
#define OF_SOC "[email protected]"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/[email protected]/[email protected]"
/*
* select ethernet configuration
*
......@@ -133,16 +144,18 @@
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
#define CONFIG_ETHER_ON_FCC1
#define FCC_ENET
/*
* - Rx-CLK is CLK13
* - Tx-CLK is CLK14
* - Rx-CLK is CLK10
* - Tx-CLK is CLK9
* - RAM for BD/Buffers is on the 60x Bus (see 28-13)
* - Enable Full Duplex in FSMR
*/
# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
# define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
......@@ -166,6 +179,8 @@
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_RTC_PCF8563
#define CFG_I2C_RTC_ADDR 0x51
/*
* Command line configuration.
......@@ -211,7 +226,10 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CFG_FLASH_BANKS_LIST { 0xFF800000 }
#define CFG_MAX_FLASH_BANKS_DETECT 1
/* What should the base address of the main FLASH be and how big is
* it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
* The main FLASH is whichever is connected to *CS0.
......@@ -227,7 +245,7 @@
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
......@@ -511,12 +529,12 @@
*/
#define CFG_OR2 ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
ORxS_BPD_4 |\
ORxS_ROWST_PBI0_A10 |\
ORxS_ROWST_PBI0_A9 |\
ORxS_NUMR_12)
#define CFG_PSDMR (PSDMR_SDAM_A13_IS_A5 |\
#define CFG_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
PSDMR_BSMA_A15_A17 |\
PSDMR_SDA10_PBI0_A11 |\
PSDMR_SDA10_PBI0_A10 |\
PSDMR_RFRC_5_CLK |\
PSDMR_PRETOACT_2W |\
PSDMR_ACTTORW_2W |\
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment