... | ... | @@ -37,8 +37,9 @@ The debug interface on the larger boards can be used separately for debugging cu |
|
|
Besides the SWD debug interface, the USB connection integrates
|
|
|
1. the power supply for the board
|
|
|
2. a USB VCP (virtual COM port) for board communication
|
|
|
3. a USB MSC (mass storage class) device (USB drive) for easy flashing (programming) the board by simply copying a .bin file to the USB drive
|
|
|
|
|
|
3. "MBED microcontroller USB device" a USB MSC (mass storage class) USB-stick/disk/disk for easy flashing (programming) the board by simply copying a .bin file to the USB drive
|
|
|
The USB MSC driver is a standard driver supplied by the OS without installing any specific software/driver.
|
|
|
![devmgmt](uploads/b5e0dfb1f8a2eb8ab1f86f63ee08f6f6/devmgmt.png)
|
|
|
For each board you have, you should read (at least: browse) the docs
|
|
|
* board ressources (like https://www.st.com/en/evaluation-tools/nucleo-f446re.html#resource)
|
|
|
* chip data sheet (like https://www.st.com/resource/en/datasheet/stm32f446re.pdf)
|
... | ... | |