Commit c6bfe88c authored by Olaf Meeuwissen's avatar Olaf Meeuwissen

Update mailing lists addresses to new location

parent 4ade295a
Pipeline #20700903 passed with stages
in 7 minutes and 1 second
......@@ -135,7 +135,7 @@ $ make install
However, please check and redo the installation described above.
If this doesn't help, you can ask the mailing list
<sane-devel@lists.alioth.debian.org> for further support.
<sane-devel@alioth-lists.debian.net> for further support.
2.4.3. Testscan:
......
......@@ -6880,7 +6880,7 @@ sane_open (SANE_String_Const devicename, SANE_Handle * handle)
" had only limited testing. Please be careful and \n");
DBG (DBG_error0, " report any failure/success to \n");
DBG (DBG_error0,
" sane-devel@lists.alioth.debian.org. Please provide as many\n");
" sane-devel@alioth-lists.debian.net. Please provide as many\n");
DBG (DBG_error0,
" details as possible, e.g. the exact name of your\n");
DBG (DBG_error0, " scanner and what does (not) work.\n");
......
......@@ -1480,7 +1480,7 @@ sane_open (SANE_String_Const devicename, SANE_Handle * handle)
DBG (0, "WARNING: Your scanner is not fully supported or at least \n");
DBG (0, " had only limited testing. Please be careful and \n");
DBG (0, " report any failure/success to \n");
DBG (0, " sane-devel@lists.alioth.debian.org. Please provide as many\n");
DBG (0, " sane-devel@alioth-lists.debian.net. Please provide as many\n");
DBG (0, " details as possible, e.g. the exact name of your\n");
DBG (0, " scanner and what does (not) work.\n");
}
......@@ -1495,7 +1495,7 @@ sane_open (SANE_String_Const devicename, SANE_Handle * handle)
DBG (0,
" the scanner immediately if you hear unusual noise. \n");
DBG (0, " Please report any success to \n");
DBG (0, " sane-devel@lists.alioth.debian.org. Please provide as many\n");
DBG (0, " sane-devel@alioth-lists.debian.net. Please provide as many\n");
DBG (0, " details as possible, e.g. the exact name of your\n");
DBG (0, " scanner, ids, settings etc.\n");
......
......@@ -1684,7 +1684,7 @@ attach (SANE_String_Const devname, Mustek_Device ** devp, SANE_Bool may_wait)
"careful and read\n the PROBLEMS file in the sane directory. "
"Please set the debug level of this\n backend to maximum "
"(export SANE_DEBUG_MUSTEK=255) and send the output of\n "
"scanimage -L to the SANE mailing list sane-devel@lists.alioth.debian.org. "
"scanimage -L to the SANE mailing list sane-devel@alioth-lists.debian.net. "
"Please include\n the exact model name of your scanner and to "
"which extend it works.\n");
}
......
......@@ -466,7 +466,7 @@ sane_open (SANE_String_Const name, SANE_Handle * handle)
" had only limited testing. Please be careful and \n");
DBG (DBG_error0, " report any failure/success to \n");
DBG (DBG_error0,
" sane-devel@lists.alioth.debian.org. Please provide as many\n");
" sane-devel@alioth-lists.debian.net. Please provide as many\n");
DBG (DBG_error0,
" details as possible, e.g. the exact name of your\n");
DBG (DBG_error0, " scanner and what does (not) work.\n");
......
......@@ -2,7 +2,7 @@
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for sane-backends 1.0.27git.
#
# Report bugs to <sane-devel@lists.alioth.debian.org>.
# Report bugs to <sane-devel@alioth-lists.debian.net>.
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
......@@ -275,7 +275,7 @@ fi
$as_echo "$0: be upgraded to zsh 4.3.4 or later."
else
$as_echo "$0: Please tell bug-autoconf@gnu.org and
$0: sane-devel@lists.alioth.debian.org about your system,
$0: sane-devel@alioth-lists.debian.net about your system,
$0: including any error possibly output before this
$0: message. Then install a modern shell, or manually run
$0: the script under such a shell if you do have one."
......@@ -592,7 +592,7 @@ PACKAGE_NAME='sane-backends'
PACKAGE_TARNAME='sane-backends'
PACKAGE_VERSION='1.0.27git'
PACKAGE_STRING='sane-backends 1.0.27git'
PACKAGE_BUGREPORT='sane-devel@lists.alioth.debian.org'
PACKAGE_BUGREPORT='sane-devel@alioth-lists.debian.net'
PACKAGE_URL=''
# Factoring default headers for most tests.
......@@ -1641,7 +1641,7 @@ Some influential environment variables:
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <sane-devel@lists.alioth.debian.org>.
Report bugs to <sane-devel@alioth-lists.debian.net>.
_ACEOF
ac_status=$?
fi
......@@ -1864,7 +1864,7 @@ $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
( $as_echo "## ------------------------------------------------- ##
## Report this to sane-devel@lists.alioth.debian.org ##
## Report this to sane-devel@alioth-lists.debian.net ##
## ------------------------------------------------- ##"
) | sed "s/^/$as_me: WARNING: /" >&2
;;
......@@ -22614,7 +22614,7 @@ $config_headers
Configuration commands:
$config_commands
Report bugs to <sane-devel@lists.alioth.debian.org>."
Report bugs to <sane-devel@alioth-lists.debian.net>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
......
......@@ -6,7 +6,7 @@ dnl When preparing a release, modify the numeric version components
dnl and remove the git suffix.
dnl ******************************************************************
AC_INIT([sane-backends],[1.0.27git],
[sane-devel@lists.alioth.debian.org])
[sane-devel@alioth-lists.debian.net])
AC_PREREQ([2.69]) dnl minimum autoconf version required
AC_CONFIG_MACRO_DIR([m4])
AC_CONFIG_HEADERS([include/sane/config.h])
......
......@@ -14,7 +14,7 @@ is recognized, but support for it is untested.
If you own a Abaton scanner other than the ones listed above that
works with this backend, or if you own an Abaton scanner that does not
work with this backend, please contact
.IR sane\-devel@lists.alioth.debian.org
.IR sane\-devel@alioth-lists.debian.net
with the model number, so that arrangements can be made to include
support for it. Have a look at http://www.sane\-project.org/mailing\-lists.html
concerning subscription to sane\-devel.
......@@ -107,7 +107,7 @@ former is more likely than the latter.
If you have found something that you think is a bug, please attempt to
recreate it with the SANE_DEBUG_ABATON environment variable set to
255, and send a report detailing the conditions surrounding the bug to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
.SH TODO
.TP
......
......@@ -31,7 +31,7 @@ color scans.
If you own a scanner other than the ones listed above that works with
this backend, please let us know by sending the scanner's model name,
SCSI id, and firmware revision to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
Have a look at http://www.sane\-project.org/mailing\-lists.html
concerning subscription to sane\-devel.
.PP
......
......@@ -23,7 +23,7 @@ ColorOneScanner 24bit RGB color 3-pass
If you own a Apple scanner other than the ones listed above that
works with this backend, please let us know by sending the scanner's
model name, SCSI id, and firmware revision to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
See http://www.sane\-project.org/mailing\-lists.html for details on how to subscribe to
sane\-devel.
......
......@@ -30,7 +30,7 @@ COPISCAN II 3338(A) Simplex Scanner (with ACE)
.PP
If you have a Bell+Howell scanner and are able to test it with this
backend, please contact
.IR sane\-devel@lists.alioth.debian.org
.IR sane\-devel@alioth-lists.debian.net
with the model number and testing results. Have a look at
http://www.sane\-project.org/mailing\-lists.html concerning subscription to
sane\-devel. Additionally, the author is curious as to the likelihood of using
......@@ -536,7 +536,7 @@ This is a new backend; detailed bug reports are welcome -- and expected ;)
If you have found something that you think is a bug, please attempt to
recreate it with the SANE_DEBUG_BH environment variable set to
255, and send a report detailing the conditions surrounding the bug to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
.SH "SEE ALSO"
sane(7), sane\-scsi(5), scanimage(1), scanadf(1)
......
......@@ -31,7 +31,7 @@ LS-8000 ED IEEE 1394
.ft R
.RE
Please send mail to sane-devel@lists.alioth.debian.org to report successes
Please send mail to sane-devel@alioth-lists.debian.net to report successes
or failures.
.SH OPTIONS
......
......@@ -214,5 +214,5 @@ Support for buttons is missing.
More detailed bug information is available at the gt68xx backend homepage
.IR http://www.meier\-geinitz.de/sane/gt68xx\-backend/ .
Please contact us if you find a bug or missing feature:
<sane\-devel@lists.alioth.debian.org>. Please send a debug log if your scanner isn't
<sane\-devel@alioth-lists.debian.net>. Please send a debug log if your scanner isn't
detected correctly (see SANE_DEBUG_GT68XX above).
......@@ -102,4 +102,4 @@ Only 8 bit color mode works.
Scanning is slow due to backtracking.
.PP
Send bug reports to the sane\-devel mailing list:
sane\-devel@lists.alioth.debian.org.
sane\-devel@alioth-lists.debian.net.
......@@ -189,6 +189,6 @@ setenv SANE_DEBUG_MICROTEK 128
.PP
More general comments, suggestions, and inquiries about frontends
or SANE should go to
.BR sane\-devel@lists.alioth.debian.org ,
.BR sane\-devel@alioth-lists.debian.net ,
the SANE Developers mailing list. Have a look at
http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel.
......@@ -92,7 +92,7 @@ If you own a Mustek (or Trust) scanner other than the ones listed
above that works with this backend, please let us know by sending the
scanner's exact model name (look at the front and back of the scanner)
and a debug output to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
You can get the debug output by setting the environment variable
.B SANE_DEBUG_MUSTEK
to 5 and showing the list of available scanners with scanimage \-L. Please
......
......@@ -460,7 +460,7 @@ Eddy De Greef <eddy_de_greef at scarlet dot be>
.SH BUGS
Too many... please send bug reports to
.I sane\-devel@lists.alioth.debian.org
.I sane\-devel@alioth-lists.debian.net
(note that you have to subscribe first to the list before you can send
emails... see http://www.sane\-project.org/mailing\-lists.html)
......
......@@ -136,7 +136,7 @@ Support for the Prima PagePartner has been made possible thank to an hardware do
by S\['e]bastien Lange.
.SH "BUG REPORTS"
If something doesn't work mail sane-devel@lists.alioth.debian.org or submit an
If something doesn't work mail sane-devel@alioth-lists.debian.net or submit an
issue via https://gitlab.com/sane-project/backends/issues/new with a label of
backend/p5.
Please give as much information as you can.
......
......@@ -21,7 +21,7 @@ successfully.
If have successfully used the PINT driver with your scanner, but it
does not work using this SANE backend, please let us know. To do
this, send a mail with the relevant information for your scanner to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription
to sane\-devel.
......
......@@ -22,7 +22,7 @@ The Siemens ST/Highscan series includes several more models, e.g. the ST300
and ST600. If you own one of these scanners, or a scanner other than the
ones listed above that works with this backend, please let us know by sending
the scanner's model name, SCSI ID, and firmware revision to
.IR sane\-devel@lists.alioth.debian.org .
.IR sane\-devel@alioth-lists.debian.net .
Have a look at http://www.sane\-project.org/mailing\-lists.html concerning subscription
to sane\-devel.
......
......@@ -18,7 +18,7 @@ For more information on this backend, please visit
This backend is also able to drive the UMAX Astra 1600U/2000U/2100U. The
2100U is confirmed to work. For the other scanners no reports have been received
yet. Please contact us and tell us if your scanner works
(sane\-devel@lists.alioth.debian.org).
(sane\-devel@alioth-lists.debian.net).
.SH CONFIGURATION
......@@ -106,7 +106,7 @@ sane(7), sane\-usb(5)
Marcio Luis Teixeira <marciot@users.sourceforge.net>
.SH EMAIL-CONTACT
sane\-devel@lists.alioth.debian.org
sane\-devel@alioth-lists.debian.net
.SH REPORTING BUGS
......
......@@ -83,7 +83,7 @@ Juergen G. Schimmer, Henning Meier-Geinitz
If more than one video card is present, a crash may occur. Frequency and geometry
selection is missing.
.br
Send bug reports to the SANE mailing list: sane\-devel@lists.alioth.debian.org. You must
Send bug reports to the SANE mailing list: sane\-devel@alioth-lists.debian.net. You must
be subscribed to the list to send mail. See
http://www.sane\-project.org/mailing\-lists.html for details.
......
......@@ -1873,7 +1873,7 @@ The SANE standard is discussed and evolved via a mailing list.
Anybody with email access to the Internet can automatically join and
leave the discussion group by sending mail to the following address.
\begin{quote}\index{mailing list}
\url{sane-devel-request@lists.alioth.debian.org}
\url{sane-devel-request@alioth-lists.debian.net}
\end{quote}
To subscribe, send a mail with the body ``\verb|subscribe sane-devel|'' to the
above address.
......
......@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.11\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-17 22:59+0100\n"
"Last-Translator: Pavel Constantinov <pavelconstantinov@bigfoot.com>\n"
......
......@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends.cs\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-17 22:59+0100\n"
"Last-Translator: Josef <joeprusa@volny.cz>\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.17\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-17 22:59+0100\n"
"Last-Translator: Mogens Jaeger <mogensjaeger@get2net.dk>\n"
......
......@@ -13,7 +13,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2010-08-06 17:17+0100\n"
"Last-Translator: Rolf Bensch <rolf at bensch hyphen online dot de>\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2009-04-25 00:19+0100\n"
"Last-Translator: Andrew Coles <andrew_coles@yahoo.co.uk>\n"
......
......@@ -9,7 +9,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends.eo\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-08 13:28+0100\n"
"Last-Translator: A.C.Codazzi\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2009-06-25 10:22+0100\n"
"Last-Translator: Miguel Anxo Bouzada <mbouzada@gmail.com>\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.11\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-17 23:00+0100\n"
"Last-Translator: Harri Järvi <harri.jarvi@tut.fi>\n"
......
......@@ -43,7 +43,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.19\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2008-01-17 22:25+0100\n"
"Last-Translator: Yann E. MORIN <yann dot morin dot 1998 at anciens dot "
......
......@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2009-06-25 10:22+0100\n"
"Last-Translator: Miguel Anxo Bouzada <mbouzada@gmail.com>\n"
......
......@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2011-04-06 19:50+0200\n"
"Last-Translator: Németh Tamás <ntomasz@uhuklub.hu>\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.18\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-08-28 23:11+0200\n"
"Last-Translator: Giuseppe Sacco <eppesuig@debian.org>\n"
......
......@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.20\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2009-10-31 10:30+0900\n"
"Last-Translator: Hiroshi Miura <miurahr@linux.com>\n"
......
......@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.12\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-17 23:01+0100\n"
"Last-Translator: Sigurd Stordal <polarbear42@phreaker.net>\n"
......
......@@ -8,7 +8,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends.nl\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2017-05-19 17:02+0100\n"
"Last-Translator: Martin Kho <mkho@posteo.net>\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.21\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2010-11-06 19:33+0100\n"
"Last-Translator: Jakub Bogusz <qboosh@pld-linux.org>\n"
......
......@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.10\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-05-08 13:31+0200\n"
"Last-Translator: Pedro Morais <morais@inocam.com>\n"
......
......@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2007-12-17 23:05+0100\n"
"Last-Translator: \n"
......
......@@ -10,7 +10,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends 1.0.18\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2012-10-22 11:17+0200\n"
"Last-Translator: Mattias Ellert <mattias.ellert@fysast.uu.se>\n"
......
......@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: sane-backends\n"
"Report-Msgid-Bugs-To: sane-devel@lists.alioth.debian.org\n"
"Report-Msgid-Bugs-To: sane-devel@alioth-lists.debian.net\n"
"POT-Creation-Date: 2017-05-14 09:24+0000\n"
"PO-Revision-Date: 2017-04-28 19:32+0300\n"
"Last-Translator: Yuri Chornoivan <yurchor@ukr.net>\n"
......
......@@ -10,7 +10,7 @@ Description: SANE (Scanner Access Now Easy) is a universal scanner
Keywords: scanner, camera, flatbed, automatic document feeder (ADF),
slides, diapositive, negative, film, transparency, CIS, CCD,
network server & client, Java API & client
Author: The SANE development team (sane-devel@lists.alioth.debian.org)
Author: The SANE development team (sane-devel@alioth-lists.debian.net)
(see AUTHORS for complete list)
Maintained-by: kitno455@gmail.com (m. allan noah)
Primary-site: ftp.sane-project.org /pub/sane/sane-backends-_VERSION_
......
......@@ -22,7 +22,7 @@
# device detection support for your OS
#
# If the scanner is supported by sane-backends, please mail the entry to
# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).
#
# Hewlett-Packard ScanJet 4100C
0x03f0 0x0101 root:scanner 0664
......
......@@ -11,7 +11,7 @@
# device detection support for your OS
#
# If the scanner is supported by sane-backends, please mail the entry to
# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).
#
# Hewlett-Packard ScanJet 4100C
usb:v03F0p0101*
......
......@@ -21,7 +21,7 @@
# device detection support for your OS
#
# If the scanner is supported by sane-backends, please mail the entry to
# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).
#
ACTION!="add", GOTO="libsane_rules_end"
ENV{DEVTYPE}=="usb_device", GOTO="libsane_create_usb_dev"
......
......@@ -18,7 +18,7 @@
# device detection support for your OS
#
# If the scanner is supported by sane-backends, please mail the entry to
# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).
#
ACTION!="add", GOTO="libsane_rules_end"
......
......@@ -21,7 +21,7 @@
# device detection support for your OS
#
# If the scanner is supported by sane-backends, please mail the entry to
# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).
#
ACTION!="add", GOTO="libsane_rules_end"
ENV{DEVTYPE}=="usb_device", GOTO="libsane_create_usb_dev"
......
......@@ -20,7 +20,7 @@
# device detection support for your OS
#
# If the scanner is supported by sane-backends, please mail the entry to
# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).
# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).
#
# Hewlett-Packard ScanJet 4100C
libusbscanner 0x0003 0x03f0 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
......
......@@ -2,7 +2,7 @@
#
# This script is part of SANE, <URL:http://www.sane-project.org/>
#
# Send bugreports and other requests to sane-devel@lists.alioth.debian.org
# Send bugreports and other requests to sane-devel@alioth-lists.debian.net
PACKAGE="@PACKAGE@"
scriptname="sane-config"
......
......@@ -3360,7 +3360,7 @@ print_usermap_header (void)
"# device detection support for your OS\n"
"#\n"
"# If the scanner is supported by sane-backends, please mail the entry to\n"
"# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).\n"
"# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).\n"
"#\n"
);
......@@ -3427,7 +3427,7 @@ print_db_header (void)
"# device detection support for your OS\n"
"#\n"
"# If the scanner is supported by sane-backends, please mail the entry to\n"
"# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).\n"
"# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).\n"
"#\n"
);
}
......@@ -3491,7 +3491,7 @@ print_udev_header (void)
"# device detection support for your OS\n"
"#\n"
"# If the scanner is supported by sane-backends, please mail the entry to\n"
"# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).\n"
"# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).\n"
"#\n"
);
}
......@@ -3679,7 +3679,7 @@ print_udevhwdb_header (void)
"# device detection support for your OS\n"
"#\n"
"# If the scanner is supported by sane-backends, please mail the entry to\n"
"# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).\n"
"# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).\n"
"#\n"
);
}
......@@ -3782,7 +3782,7 @@ print_hwdb_header (void)
"# device detection support for your OS\n"
"#\n"
"# If the scanner is supported by sane-backends, please mail the entry to\n"
"# the sane-devel mailing list (sane-devel@lists.alioth.debian.org).\n"
"# the sane-devel mailing list (sane-devel@alioth-lists.debian.net).\n"
"#"
);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment