Can't connect Playstation 4 controller
This is not necessarily issue and can be user error, but I can't connect Playstation 4 controller to Unijoysticle 2. I have cheap Ebay brown ESP32-development board and I have tested precompiled 0.1.0 firmware and today I tried firmware which I compiled myself from gitlab-source. Same problem with both. Controller works wirelessly with Windows 10 PC with cheap chinese nobrand Bluetooth dongle. I have tried to reset controller from pinhole reset button and tried to put controller to pairing mode with PS+Share -keycombination. Another kind of controller paired instantly with Unijoysticle 2. What term "PC mode" means in Supported devices documentation? How I put PS4-controller to PC mode? Any suggestions what to try next?
First I get:
Starting inquiry scan..
Device found: 40:1B:5F:A3:40:D4 with COD: 0x002508, pageScan 1, clock offset 0x45ae, rssi -56 dBm, name 'Wireless Controller'
[00:00:22.823] LOG -- l2cap.c.1885: L2CAP_CREATE_CHANNEL addr 40:1B:5F:A3:40:D4 psm 0x11 mtu 48 -> local mtu 48
[00:00:22.833] LOG -- l2cap.c.1864: channel 0x3ffba1e8, local_cid 0x0040
[00:00:22.843] LOG -- hci.c.3830: Create_connection to 40:1B:5F:A3:40:D4
[00:00:22.843] LOG -- hci.c.187: create_connection_for_addr 40:1B:5F:A3:40:D4, type ff
[00:00:22.853] LOG -- hci.c.3842: conn state 0
[00:00:22.863] LOG -- hci.c.2029: command status (create connection), status 0, connection 0x3ffd174c, addr 40:1B:5F:A3:40:D4, type ff
Starting inquiry scan..
Then after couple of seconds I get:
Starting inquiry scan..
[00:00:41.193] LOG -- hci.c.2113: Connection_complete (status=8) 40:1B:5F:A3:40:D4
[00:00:41.193] LOG -- hci.c.1835: Outgoing connection to 40:1B:5F:A3:40:D4 failed
[00:00:41.203] LOG -- l2cap.c.905: L2CAP_EVENT_CHANNEL_OPENED status 0x8 addr 40:1B:5F:A3:40:D4 handle 0xffff psm 0x11 local_cid 0x40 remote_cid 0x0 local_mtu 48, remote_mtu 672, flush_timeout 0
L2CAP_EVENT_CHANNEL_OPENED (channel=0x0040)
L2CAP Connection failed: 0x08.
[00:00:41.223] LOG -- l2cap.c.1100: l2cap_stop_rtx for local cid 0x40
--> HCI_EVENT_CONNECTION_COMPLETE:
on_hci_connection_complete failed (8) for 40:1B:5F:A3:40:D4
Starting inquiry scan..