after-install-System-configuration.md

@@ -85,96 +85,81 @@ and by WorkFlow > Studio (enable) > Daily (disable)
 
 Add threadirqs to GRUB_CMDLINE_LINUX_DEFAULT:
 
-
 First copy cpupower config to this files:
 
-	sudo cp /etc/default/grub ~/.config/openbox/obconfigs/grub.default
-	sudo cp /etc/default/grub ~/.config/openbox/obconfigs/grub.daily
-	sudo cp /etc/default/grub ~/.config/openbox/obconfigs/grub.studio
+`sudo cp /etc/default/grub ~/.config/openbox/obconfigs/grub.default`
+
+`sudo cp /etc/default/grub ~/.config/openbox/obconfigs/grub.daily`
+
+`sudo cp /etc/default/grub ~/.config/openbox/obconfigs/grub.studio`
 
 (cpupower.default is backup just in case)
 
 then
 
-	sudo nano ~/.config/openbox/obconfigs/grub.studio
-
+`sudo nano ~/.config/openbox/obconfigs/grub.studio`
+```
 GRUB_CMDLINE_LINUX_DEFAULT="quiet threadirqs"
-
+```
 Save changes with Ctrl+o and exit Ctrl+x
 
 in grub.daily store your configuration for daily use.
 
-
-
 Usually we're making this changes in /etc/default/grub but in this case default grub config file is overwritten by grub.daily and grub.studio when we are changing WorkFlow.
 
-
-
 ## Unlocking memory:
 
-
-	sudo nano /etc/security/limits.d/99-realtime-privileges.conf
+`sudo nano /etc/security/limits.d/99-realtime-privileges.conf`
 
 and paste:
-
+```
 @realtime - rtprio 99
 @realtime - memlock unlimited
 @audio - rtprio 99
 @audio - memlock unlimited
-
-
+```
 
 ## Increasing Open Files Limit:
 
-
-	sudo nano /etc/security/limits.conf
+`sudo nano /etc/security/limits.conf`
 
 and paste:
-
+```
 *         hard    nofile      500000
 *         soft    nofile      500000
 root      hard    nofile      500000
 root      soft    nofile      500000
+```
 
+## Increasing the highest requested RTC interrupt frequency and HPET
 
-Increase “Open Files Limit”
-
-
-## Increasing the highest requested RTC interrupt frequency
-
-That part is automated via recbox-install.sh script (recbox-dev) and package installation so no need to configure it manually.
-
-What this script doing is:
-
+That part is automated via recbox-install.sh script (recbox-dev) so no need to configure it manually.
 
+What this scripts doing is:
 
+rtc.sh
+```
 echo 3072 > /sys/class/rtc/rtc0/max_user_freq
+```
+hpet.sh
+```
 echo 3072 > /proc/sys/dev/hpet/max-user-freq
-
+```
 To enable, disable RTC at boot go to obmenu
 Recbox Settings > Increas RTC
 
-
-
-
-
-
-
-
-
 or change WorkFlow > Daily (disable)
 			> Studio (enable)
 
 ## Setting up High Precision Event Timer
 
+`sudo nano /etc/udev/rules.d/40-timer-permissions.rules`
 
-  sudo nano /etc/udev/rules.d/40-timer-permissions.rules
-  
+```
 KERNEL=="rtc0", GROUP="audio"
 KERNEL=="hpet", GROUP="audio"
-
-
-“Using hardware timers to achieve more accurate MIDI timing is questionable. Applications that use ALSA MIDI (via either the Sequencer or the Raw MIDI Interface) may be affected by using hardware timers but it might be better to rely on a high resolution software-based timer like the snd-hrtimer kernel module.
+```
+> “Using hardware timers to achieve more accurate MIDI timing is questionable. Applications that use ALSA MIDI (via either the Sequencer or the Raw MIDI Interface) may be affected by using hardware timers but it might be better to rely on a high resolution software-based timer like the snd-hrtimer kernel module.
 
 Some MIDI sequencers or DAWs that rely on ALSA MIDI might benefit from being able to use hardware timers like the real-time clock (/dev/rtc) or the High Precision Event Timer (/dev/hpet).”
 10. Check if noatime is set