mk_arcade_joystick_rpi don't recognise i2c-gpio overlay
Hi, I open thi issue to solve one thing from the thread [Project] JAMMA-Pi from the forum.
I'm using two MCP23017 with addresses 000 & 001, I make some new test with these proto pcb: https://i.imgur.com/QsLyYbR.jpg
Well, I follow all the steps from the readme file of https://github.com/recalbox/mk_arcade_joystick_rpi/tree/hotkeybtn and I leave on config.txt only the i2c actived and other overlays disabled, when I run i2cdetect -y 1 all works well and show me these:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: 20 -- -- -- 24 -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Detect 20 and 24 addresses ok, but when I try to move the pins to another gpio using these line on config.txt
dtoverlay=i2c-gpio,i2c_gpio_sda=10,i2c_gpio_scl=11
And I run i2cdetect...
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
How can I solve this? Many thanks in advance.