samsung-klte(S5Qualcomm)Flashing problem
wx@wx-virtual-machine:~/桌面$ pmbootstrap flasher flash_rootfs
[18:10:31] (native) flash rootfs image
[sudo] wx 的密码：
< wait for any device >
Heimdall v1.4.2
Copyright (c) 2010-2017 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading SYSTEM
100%
SYSTEM upload successful
Ending session...
Rebooting device...
Releasing device interface...
[18:11:32] NOTE: chroot is still active (use 'pmbootstrap shutdown' as necessary)
[18:11:32] Done
wx@wx-virtual-machine:~/桌面$ pmbootstrap flasher flash_kernel
[18:11:51] (rootfs_samsung-klte) mkinitfs samsung-klte
[18:12:24] (native) flash kernel samsung-klte
< wait for any device >
Heimdall v1.4.2
Copyright (c) 2010-2017 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading BOOT
100%
BOOT upload successful
Ending session...
Rebooting device...
Releasing device interface...
[18:12:36] You will get an IP automatically assigned to your USB interface shortly.
[18:12:36] Then you can connect to your device using ssh after pmOS has booted:
[18:12:36] ssh aini3225@172.16.42.1
[18:12:36] NOTE: If you enabled full disk encryption, you should make sure that osk-sdl has been properly configured for your device
[18:12:36] NOTE: chroot is still active (use 'pmbootstrap shutdown' as necessary)
[18:12:36] Done
wx@wx-virtual-machine:~/桌面$The device restarts repeatedly and does not enter the system
ZIP flashing!
Edited by Bart Ribbers