CCGx has two copies of the firmware in addition to the bootloader.
If the device is running FW1, FW2 can be updated with the new version.
Dual firmware mode allows the CCG device to stay in a PD contract and
support USB PD and Type-C functionality while a firmware update is in
First we read the currently flashed firmware version of both
primary and secondary firmware and then compare it with
version of firmware file to determine if flashing is required.
Command framework is added to support sending commands to CCGx
controller. We wait for response after sending the command and then
read the response from RAB_RESPONSE register.
Below commands are supported,
Command specific mutex lock is also added to sync between driver
and user threads.
PD port number information is added which is required while sending
Signed-off-by: Ajay Gupta <email@example.com>
[ heikki: Added ABI documentation. ]
Signed-off-by: Heikki Krogerus <firstname.lastname@example.org>
Signed-off-by: Greg Kroah-Hartman <email@example.com>