1. 26 Sep, 2018 2 commits
  2. 12 Jun, 2018 1 commit
    • Kees Cook's avatar
      treewide: kmalloc() -> kmalloc_array() · 6da2ec56
      Kees Cook authored
      The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
      patch replaces cases of:
      
              kmalloc(a * b, gfp)
      
      with:
              kmalloc_array(a * b, gfp)
      
      as well as handling cases of:
      
              kmalloc(a * b * c, gfp)
      
      with:
      
              kmalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kmalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kmalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The tools/ directory was manually excluded, since it has its own
      implementation of kmalloc().
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kmalloc
      + kmalloc_array
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(sizeof(THING) * C2, ...)
      |
        kmalloc(sizeof(TYPE) * C2, ...)
      |
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(C1 * C2, ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      6da2ec56
  3. 11 Jan, 2018 1 commit
  4. 25 Apr, 2017 1 commit
    • Petr Mladek's avatar
      IB/fmr_pool: Convert the cleanup thread into kthread worker API · 50b6778c
      Petr Mladek authored
      Kthreads are currently implemented as an infinite loop. Each
      has its own variant of checks for terminating, freezing,
      awakening. In many cases it is unclear to say in which state
      it is and sometimes it is done a wrong way.
      
      The plan is to convert kthreads into kthread_worker or workqueues
      API. It allows to split the functionality into separate operations.
      It helps to make a better structure. Also it defines a clean state
      where no locks are taken, IRQs blocked, the kthread might sleep
      or even be safely migrated.
      
      The kthread worker API is useful when we want to have a dedicated
      single thread for the work. It helps to make sure that it is
      available when needed. Also it allows a better control, e.g.
      define a scheduling priority.
      
      This patch converts the frm_pool kthread into the kthread worker
      API because I am not sure how busy the thread is. It is well
      possible that it does not need a dedicated kthread and workqueues
      would be perfectly fine. Well, the conversion between kthread
      worker API and workqueues is pretty trivial.
      
      The patch moves one iteration from the kthread into the work function.
      It is queued only when there is a pending work. Therefore we do not
      need to compare flush_ser and req_ser at the beginning. On the contrary,
      the same work could be queued only once at a time. Therefore it has to
      re-queue itself if some requests are pending.
      
      Otherwise, wake_up_process() is replaced by queuing the work.
      
      Important: The change is only compile tested. I did not find an easy
      way how to check it in a real life.
      Signed-off-by: default avatarPetr Mladek <pmladek@suse.com>
      TO: Doug Ledford <dledford@redhat.com>
      CC: Sean Hefty <sean.hefty@intel.com>
      CC: Hal Rosenstock <hal.rosenstock@gmail.com>
      CC: linux-rdma@vger.kernel.org
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      50b6778c
  5. 03 Dec, 2016 1 commit
  6. 03 Mar, 2016 1 commit
  7. 22 Dec, 2015 1 commit
  8. 28 Feb, 2013 1 commit
    • Sasha Levin's avatar
      hlist: drop the node parameter from iterators · b67bfe0d
      Sasha Levin authored
      I'm not sure why, but the hlist for each entry iterators were conceived
      
              list_for_each_entry(pos, head, member)
      
      The hlist ones were greedy and wanted an extra parameter:
      
              hlist_for_each_entry(tpos, pos, head, member)
      
      Why did they need an extra pos parameter? I'm not quite sure. Not only
      they don't really need it, it also prevents the iterator from looking
      exactly like the list iterator, which is unfortunate.
      
      Besides the semantic patch, there was some manual work required:
      
       - Fix up the actual hlist iterators in linux/list.h
       - Fix up the declaration of other iterators based on the hlist ones.
       - A very small amount of places were using the 'node' parameter, this
       was modified to use 'obj->member' instead.
       - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
       properly, so those had to be fixed up manually.
      
      The semantic patch which is mostly the work of Peter Senna Tschudin is here:
      
      @@
      iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
      
      type T;
      expression a,c,d,e;
      identifier b;
      statement S;
      @@
      
      -T b;
          <+... when != b
      (
      hlist_for_each_entry(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_continue(a,
      - b,
      c) S
      |
      hlist_for_each_entry_from(a,
      - b,
      c) S
      |
      hlist_for_each_entry_rcu(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_rcu_bh(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_continue_rcu_bh(a,
      - b,
      c) S
      |
      for_each_busy_worker(a, c,
      - b,
      d) S
      |
      ax25_uid_for_each(a,
      - b,
      c) S
      |
      ax25_for_each(a,
      - b,
      c) S
      |
      inet_bind_bucket_for_each(a,
      - b,
      c) S
      |
      sctp_for_each_hentry(a,
      - b,
      c) S
      |
      sk_for_each(a,
      - b,
      c) S
      |
      sk_for_each_rcu(a,
      - b,
      c) S
      |
      sk_for_each_from
      -(a, b)
      +(a)
      S
      + sk_for_each_from(a) S
      |
      sk_for_each_safe(a,
      - b,
      c, d) S
      |
      sk_for_each_bound(a,
      - b,
      c) S
      |
      hlist_for_each_entry_safe(a,
      - b,
      c, d, e) S
      |
      hlist_for_each_entry_continue_rcu(a,
      - b,
      c) S
      |
      nr_neigh_for_each(a,
      - b,
      c) S
      |
      nr_neigh_for_each_safe(a,
      - b,
      c, d) S
      |
      nr_node_for_each(a,
      - b,
      c) S
      |
      nr_node_for_each_safe(a,
      - b,
      c, d) S
      |
      - for_each_gfn_sp(a, c, d, b) S
      + for_each_gfn_sp(a, c, d) S
      |
      - for_each_gfn_indirect_valid_sp(a, c, d, b) S
      + for_each_gfn_indirect_valid_sp(a, c, d) S
      |
      for_each_host(a,
      - b,
      c) S
      |
      for_each_host_safe(a,
      - b,
      c, d) S
      |
      for_each_mesh_entry(a,
      - b,
      c, d) S
      )
          ...+>
      
      [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
      [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
      [akpm@linux-foundation.org: checkpatch fixes]
      [akpm@linux-foundation.org: fix warnings]
      [akpm@linux-foudnation.org: redo intrusive kvm changes]
      Tested-by: Peter Senna Tschudin's avatarPeter Senna Tschudin <peter.senna@gmail.com>
      Acked-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Gleb Natapov <gleb@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b67bfe0d
  9. 31 Oct, 2011 1 commit
  10. 15 Jul, 2008 1 commit
  11. 17 Apr, 2008 1 commit
  12. 29 Feb, 2008 2 commits
  13. 05 Feb, 2008 1 commit
  14. 25 Jan, 2008 2 commits
    • Olaf Kirch's avatar
      IB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs · a3cd7d90
      Olaf Kirch authored
      When a FMR is released via ib_fmr_pool_unmap(), the FMR usually ends
      up on the free_list rather than the dirty_list (because we allow a
      certain number of remappings before actually requiring a flush).
      
      However, ib_fmr_batch_release() only looks at dirty_list when flushing
      out old mappings.  This means that when ib_fmr_pool_flush() is used to
      force a flush of the FMR pool, some dirty FMRs that have not reached
      their maximum remap count will not actually be flushed.
      
      Fix this by flushing all FMRs that have been used at least once in
      ib_fmr_batch_release().
      Signed-off-by: default avatarOlaf Kirch <olaf.kirch@oracle.com>
      Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      a3cd7d90
    • Olaf Kirch's avatar
      IB/fmr_pool: Flush serial numbers can get out of sync · a656eb75
      Olaf Kirch authored
      Normally, the serial numbers for flush requests and flushes executed
      for an FMR pool should be in sync.
      
      However, if the FMR pool flushes dirty FMRs because the
      dirty_watermark was reached, we wake up the cleanup thread and let it
      do its stuff.  As a side effect, the cleanup thread increments
      pool->flush_ser, which leaves it one higher than pool->req_ser.  The
      next time the user calls ib_flush_fmr_pool(), the cleanup thread will
      be woken up, but ib_flush_fmr_pool() won't wait for the flush to
      complete because flush_ser is already past req_ser.  This means the
      FMRs that the user expects to be flushed may not have all been flushed
      when the function returns.
      
      Fix this by telling the cleanup thread to do work exclusively by
      incrementing req_ser, and by moving the comparison of dirty_len and
      dirty_watermark into ib_fmr_pool_unmap().
      Signed-off-by: default avatarOlaf Kirch <olaf.kirch@oracle.com>
      a656eb75
  15. 30 Oct, 2007 1 commit
  16. 10 Oct, 2007 1 commit
  17. 07 May, 2007 1 commit
  18. 16 Feb, 2007 1 commit
  19. 12 Dec, 2006 1 commit
    • Roland Dreier's avatar
      IB/fmr: ib_flush_fmr_pool() may wait too long · f47e22c6
      Roland Dreier authored
      ib_flush_fmr_pool() stashes away the request generation number
      properly, but then goes ahead and rereads it every time it tests
      whether the flush generation number has caught up.  This means that
      there is a theoretical possibility of livelock, if the request
      generation number keeps getting bumped and the flush generation number
      never catches up.  The fix is simple: use the request generation
      number read at the beginning of the function.
      
      Also, atomic_inc() followed by atomic_read() can be replaced with
      atomic_int_return().  There's no real requirement for atomicity here
      but we might as well shrink the code.
      
      This bug was discovered using David Binderman's list of "set but never
      used" warnings from icc.
      Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      f47e22c6
  20. 15 Jul, 2006 1 commit
  21. 18 Jun, 2006 1 commit
  22. 20 Mar, 2006 1 commit
  23. 27 Aug, 2005 2 commits
  24. 27 Jul, 2005 1 commit
  25. 16 Apr, 2005 3 commits