1. 07 Sep, 2018 4 commits
    • Jan Kara's avatar
      udf: Drop pack pragma from udf_sb.h · 1abefb02
      Jan Kara authored
      Drop pack pragma. The header file defines only in-memory structures.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      1abefb02
    • Jan Kara's avatar
      udf: Drop freed bitmap / table support · 694538b5
      Jan Kara authored
      We don't support Free Space Table and Free Space Bitmap as specified by
      UDF standard for writing as we don't support erasing blocks before
      overwriting them. Just drop the handling of these structures as
      partition descriptor checking code already makes sure such filesystems
      can be mounted only read-only.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      694538b5
    • Jan Kara's avatar
      udf: Fix crash during mount · b085fbe2
      Jan Kara authored
      Fix a crash during an attempt to mount a filesystem that has both
      Unallocated Space Table and Unallocated Space Bitmap. Such filesystem
      actually violates the UDF standard so we just have to properly detect
      such situation and refuse to mount such filesystem read-write. When we
      are at it, verify also other constraints on the allocation information
      mandated by the standard.
      Reported-by: default avatarAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      b085fbe2
    • Jan Kara's avatar
      udf: Prevent write-unsupported filesystem to be remounted read-write · a9ad01bc
      Jan Kara authored
      There are certain filesystem features which we support for reading but
      not for writing. We properly refuse to mount such filesystems read-write
      however for some features (such as read-only partitions), we don't check
      for these features when remounting the filesystem from read-only to
      read-write. Thus such filesystems could be remounted read-write leading
      to strange behavior (most likely crashes).
      
      Fix the problem by marking in superblock whether the filesystem has some
      features that are supported in read-only mode and check this flag during
      remount.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      a9ad01bc
  2. 03 Sep, 2018 1 commit
  3. 24 Aug, 2018 2 commits
    • Jan Kara's avatar
      udf: Fix mounting of Win7 created UDF filesystems · ee4af50c
      Jan Kara authored
      Win7 is creating UDF filesystems with single partition with number 8192.
      Current partition descriptor scanning code does not handle this well as
      it incorrectly assumes that partition numbers will form mostly contiguous
      space of small numbers. This results in unmountable media due to errors
      like:
      
      UDF-fs: error (device dm-1): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
      UDF-fs: warning (device dm-1): udf_fill_super: No fileset found
      
      Fix the problem by handling partition descriptors in a way that sparse
      partition numbering does not matter.
      Reported-and-tested-by: default avatarjean-luc malet <jeanluc.malet@gmail.com>
      CC: stable@vger.kernel.org
      Fixes: 7b78fd02Signed-off-by: default avatarJan Kara <jack@suse.cz>
      ee4af50c
    • Jan Kara's avatar
      udf: Remove dead code from udf_find_fileset() · 82c82ab6
      Jan Kara authored
      Remove dead code and slightly simplify code in udf_find_fileset().
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      82c82ab6
  4. 03 Aug, 2018 1 commit
  5. 27 Jun, 2018 1 commit
  6. 20 Jun, 2018 3 commits
  7. 12 Jun, 2018 1 commit
    • Kees Cook's avatar
      treewide: kzalloc() -> kcalloc() · 6396bb22
      Kees Cook authored
      The kzalloc() function has a 2-factor argument form, kcalloc(). This
      patch replaces cases of:
      
              kzalloc(a * b, gfp)
      
      with:
              kcalloc(a * b, gfp)
      
      as well as handling cases of:
      
              kzalloc(a * b * c, gfp)
      
      with:
      
              kzalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kzalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kzalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kzalloc
      + kcalloc
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(sizeof(THING) * C2, ...)
      |
        kzalloc(sizeof(TYPE) * C2, ...)
      |
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(C1 * C2, ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      6396bb22
  8. 05 Jun, 2018 1 commit
    • Deepa Dinamani's avatar
      vfs: change inode times to use struct timespec64 · 95582b00
      Deepa Dinamani authored
      struct timespec is not y2038 safe. Transition vfs to use
      y2038 safe struct timespec64 instead.
      
      The change was made with the help of the following cocinelle
      script. This catches about 80% of the changes.
      All the header file and logic changes are included in the
      first 5 rules. The rest are trivial substitutions.
      I avoid changing any of the function signatures or any other
      filesystem specific data structures to keep the patch simple
      for review.
      
      The script can be a little shorter by combining different cases.
      But, this version was sufficient for my usecase.
      
      virtual patch
      
      @ depends on patch @
      identifier now;
      @@
      - struct timespec
      + struct timespec64
        current_time ( ... )
        {
      - struct timespec now = current_kernel_time();
      + struct timespec64 now = current_kernel_time64();
        ...
      - return timespec_trunc(
      + return timespec64_trunc(
        ... );
        }
      
      @ depends on patch @
      identifier xtime;
      @@
       struct \( iattr \| inode \| kstat \) {
       ...
      -       struct timespec xtime;
      +       struct timespec64 xtime;
       ...
       }
      
      @ depends on patch @
      identifier t;
      @@
       struct inode_operations {
       ...
      int (*update_time) (...,
      -       struct timespec t,
      +       struct timespec64 t,
      ...);
       ...
       }
      
      @ depends on patch @
      identifier t;
      identifier fn_update_time =~ "update_time$";
      @@
       fn_update_time (...,
      - struct timespec *t,
      + struct timespec64 *t,
       ...) { ... }
      
      @ depends on patch @
      identifier t;
      @@
      lease_get_mtime( ... ,
      - struct timespec *t
      + struct timespec64 *t
        ) { ... }
      
      @te depends on patch forall@
      identifier ts;
      local idexpression struct inode *inode_node;
      identifier i_xtime =~ "^i_[acm]time$";
      identifier ia_xtime =~ "^ia_[acm]time$";
      identifier fn_update_time =~ "update_time$";
      identifier fn;
      expression e, E3;
      local idexpression struct inode *node1;
      local idexpression struct inode *node2;
      local idexpression struct iattr *attr1;
      local idexpression struct iattr *attr2;
      local idexpression struct iattr attr;
      identifier i_xtime1 =~ "^i_[acm]time$";
      identifier i_xtime2 =~ "^i_[acm]time$";
      identifier ia_xtime1 =~ "^ia_[acm]time$";
      identifier ia_xtime2 =~ "^ia_[acm]time$";
      @@
      (
      (
      - struct timespec ts;
      + struct timespec64 ts;
      |
      - struct timespec ts = current_time(inode_node);
      + struct timespec64 ts = current_time(inode_node);
      )
      
      <+... when != ts
      (
      - timespec_equal(&inode_node->i_xtime, &ts)
      + timespec64_equal(&inode_node->i_xtime, &ts)
      |
      - timespec_equal(&ts, &inode_node->i_xtime)
      + timespec64_equal(&ts, &inode_node->i_xtime)
      |
      - timespec_compare(&inode_node->i_xtime, &ts)
      + timespec64_compare(&inode_node->i_xtime, &ts)
      |
      - timespec_compare(&ts, &inode_node->i_xtime)
      + timespec64_compare(&ts, &inode_node->i_xtime)
      |
      ts = current_time(e)
      |
      fn_update_time(..., &ts,...)
      |
      inode_node->i_xtime = ts
      |
      node1->i_xtime = ts
      |
      ts = inode_node->i_xtime
      |
      <+... attr1->ia_xtime ...+> = ts
      |
      ts = attr1->ia_xtime
      |
      ts.tv_sec
      |
      ts.tv_nsec
      |
      btrfs_set_stack_timespec_sec(..., ts.tv_sec)
      |
      btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
      |
      - ts = timespec64_to_timespec(
      + ts =
      ...
      -)
      |
      - ts = ktime_to_timespec(
      + ts = ktime_to_timespec64(
      ...)
      |
      - ts = E3
      + ts = timespec_to_timespec64(E3)
      |
      - ktime_get_real_ts(&ts)
      + ktime_get_real_ts64(&ts)
      |
      fn(...,
      - ts
      + timespec64_to_timespec(ts)
      ,...)
      )
      ...+>
      (
      <... when != ts
      - return ts;
      + return timespec64_to_timespec(ts);
      ...>
      )
      |
      - timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
      + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
      |
      - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
      + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
      |
      - timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
      + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
      |
      node1->i_xtime1 =
      - timespec_trunc(attr1->ia_xtime1,
      + timespec64_trunc(attr1->ia_xtime1,
      ...)
      |
      - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
      + attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
      ...)
      |
      - ktime_get_real_ts(&attr1->ia_xtime1)
      + ktime_get_real_ts64(&attr1->ia_xtime1)
      |
      - ktime_get_real_ts(&attr.ia_xtime1)
      + ktime_get_real_ts64(&attr.ia_xtime1)
      )
      
      @ depends on patch @
      struct inode *node;
      struct iattr *attr;
      identifier fn;
      identifier i_xtime =~ "^i_[acm]time$";
      identifier ia_xtime =~ "^ia_[acm]time$";
      expression e;
      @@
      (
      - fn(node->i_xtime);
      + fn(timespec64_to_timespec(node->i_xtime));
      |
       fn(...,
      - node->i_xtime);
      + timespec64_to_timespec(node->i_xtime));
      |
      - e = fn(attr->ia_xtime);
      + e = fn(timespec64_to_timespec(attr->ia_xtime));
      )
      
      @ depends on patch forall @
      struct inode *node;
      struct iattr *attr;
      identifier i_xtime =~ "^i_[acm]time$";
      identifier ia_xtime =~ "^ia_[acm]time$";
      identifier fn;
      @@
      {
      + struct timespec ts;
      <+...
      (
      + ts = timespec64_to_timespec(node->i_xtime);
      fn (...,
      - &node->i_xtime,
      + &ts,
      ...);
      |
      + ts = timespec64_to_timespec(attr->ia_xtime);
      fn (...,
      - &attr->ia_xtime,
      + &ts,
      ...);
      )
      ...+>
      }
      
      @ depends on patch forall @
      struct inode *node;
      struct iattr *attr;
      struct kstat *stat;
      identifier ia_xtime =~ "^ia_[acm]time$";
      identifier i_xtime =~ "^i_[acm]time$";
      identifier xtime =~ "^[acm]time$";
      identifier fn, ret;
      @@
      {
      + struct timespec ts;
      <+...
      (
      + ts = timespec64_to_timespec(node->i_xtime);
      ret = fn (...,
      - &node->i_xtime,
      + &ts,
      ...);
      |
      + ts = timespec64_to_timespec(node->i_xtime);
      ret = fn (...,
      - &node->i_xtime);
      + &ts);
      |
      + ts = timespec64_to_timespec(attr->ia_xtime);
      ret = fn (...,
      - &attr->ia_xtime,
      + &ts,
      ...);
      |
      + ts = timespec64_to_timespec(attr->ia_xtime);
      ret = fn (...,
      - &attr->ia_xtime);
      + &ts);
      |
      + ts = timespec64_to_timespec(stat->xtime);
      ret = fn (...,
      - &stat->xtime);
      + &ts);
      )
      ...+>
      }
      
      @ depends on patch @
      struct inode *node;
      struct inode *node2;
      identifier i_xtime1 =~ "^i_[acm]time$";
      identifier i_xtime2 =~ "^i_[acm]time$";
      identifier i_xtime3 =~ "^i_[acm]time$";
      struct iattr *attrp;
      struct iattr *attrp2;
      struct iattr attr ;
      identifier ia_xtime1 =~ "^ia_[acm]time$";
      identifier ia_xtime2 =~ "^ia_[acm]time$";
      struct kstat *stat;
      struct kstat stat1;
      struct timespec64 ts;
      identifier xtime =~ "^[acmb]time$";
      expression e;
      @@
      (
      ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
      |
       node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
      |
       node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
      |
       node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
      |
       stat->xtime = node2->i_xtime1;
      |
       stat1.xtime = node2->i_xtime1;
      |
      ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
      |
      ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
      |
      - e = node->i_xtime1;
      + e = timespec64_to_timespec( node->i_xtime1 );
      |
      - e = attrp->ia_xtime1;
      + e = timespec64_to_timespec( attrp->ia_xtime1 );
      |
      node->i_xtime1 = current_time(...);
      |
       node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
      - e;
      + timespec_to_timespec64(e);
      |
       node->i_xtime1 = node->i_xtime3 =
      - e;
      + timespec_to_timespec64(e);
      |
      - node->i_xtime1 = e;
      + node->i_xtime1 = timespec_to_timespec64(e);
      )
      Signed-off-by: default avatarDeepa Dinamani <deepa.kernel@gmail.com>
      Cc: <anton@tuxera.com>
      Cc: <balbi@kernel.org>
      Cc: <bfields@fieldses.org>
      Cc: <darrick.wong@oracle.com>
      Cc: <dhowells@redhat.com>
      Cc: <dsterba@suse.com>
      Cc: <dwmw2@infradead.org>
      Cc: <hch@lst.de>
      Cc: <hirofumi@mail.parknet.co.jp>
      Cc: <hubcap@omnibond.com>
      Cc: <jack@suse.com>
      Cc: <jaegeuk@kernel.org>
      Cc: <jaharkes@cs.cmu.edu>
      Cc: <jslaby@suse.com>
      Cc: <keescook@chromium.org>
      Cc: <mark@fasheh.com>
      Cc: <miklos@szeredi.hu>
      Cc: <nico@linaro.org>
      Cc: <reiserfs-devel@vger.kernel.org>
      Cc: <richard@nod.at>
      Cc: <sage@redhat.com>
      Cc: <sfrench@samba.org>
      Cc: <swhiteho@redhat.com>
      Cc: <tj@kernel.org>
      Cc: <trond.myklebust@primarydata.com>
      Cc: <tytso@mit.edu>
      Cc: <viro@zeniv.linux.org.uk>
      95582b00
  9. 25 May, 2018 1 commit
    • Deepa Dinamani's avatar
      udf: Simplify calls to udf_disk_stamp_to_time · 0220edda
      Deepa Dinamani authored
      Subsequent patches in the series convert inode timestamps
      to use struct timespec64 instead of struct timespec as
      part of solving the y2038 problem.
      
      commit fd3cfad3 ("udf: Convert udf_disk_stamp_to_time() to use mktime64()")
      eliminated the NULL return condition from udf_disk_stamp_to_time().
      udf_time_to_disk_time() is always called with a valid dest pointer and
      the return value is ignored.
      Further, caller can as well check the dest pointer being passed in rather
      than return argument.
      Make both the functions return void.
      
      This will make the inode timestamp conversion simpler.
      Signed-off-by: default avatarDeepa Dinamani <deepa.kernel@gmail.com>
      Cc: jack@suse.com
      
      ----
      Changes from v1:
      * fixed the pointer error pointed by Jan
      0220edda
  10. 11 May, 2018 1 commit
    • Al Viro's avatar
      do d_instantiate/unlock_new_inode combinations safely · 1e2e547a
      Al Viro authored
      For anything NFS-exported we do _not_ want to unlock new inode
      before it has grown an alias; original set of fixes got the
      ordering right, but missed the nasty complication in case of
      lockdep being enabled - unlock_new_inode() does
      	lockdep_annotate_inode_mutex_key(inode)
      which can only be done before anyone gets a chance to touch
      ->i_mutex.  Unfortunately, flipping the order and doing
      unlock_new_inode() before d_instantiate() opens a window when
      mkdir can race with open-by-fhandle on a guessed fhandle, leading
      to multiple aliases for a directory inode and all the breakage
      that follows from that.
      
      	Correct solution: a new primitive (d_instantiate_new())
      combining these two in the right order - lockdep annotate, then
      d_instantiate(), then the rest of unlock_new_inode().  All
      combinations of d_instantiate() with unlock_new_inode() should
      be converted to that.
      
      Cc: stable@kernel.org	# 2.6.29 and later
      Tested-by: default avatarMike Marshall <hubcap@omnibond.com>
      Reviewed-by: default avatarAndreas Dilger <adilger@dilger.ca>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      1e2e547a
  11. 19 Apr, 2018 6 commits
  12. 18 Apr, 2018 1 commit
    • Jan Kara's avatar
      udf: Fix leak of UTF-16 surrogates into encoded strings · 44f06ba8
      Jan Kara authored
      OSTA UDF specification does not mention whether the CS0 charset in case
      of two bytes per character encoding should be treated in UTF-16 or
      UCS-2. The sample code in the standard does not treat UTF-16 surrogates
      in any special way but on systems such as Windows which work in UTF-16
      internally, filenames would be treated as being in UTF-16 effectively.
      In Linux it is more difficult to handle characters outside of Base
      Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte
      characters only. Just make sure we don't leak UTF-16 surrogates into the
      resulting string when loading names from the filesystem for now.
      
      CC: stable@vger.kernel.org # >= v4.6
      Reported-by: Mingye Wang's avatarMingye Wang <arthur200126@gmail.com>
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      44f06ba8
  13. 02 Mar, 2018 2 commits
  14. 27 Feb, 2018 7 commits
  15. 16 Feb, 2018 4 commits
  16. 19 Dec, 2017 1 commit
  17. 27 Nov, 2017 1 commit
    • Linus Torvalds's avatar
      Rename superblock flags (MS_xyz -> SB_xyz) · 1751e8a6
      Linus Torvalds authored
      This is a pure automated search-and-replace of the internal kernel
      superblock flags.
      
      The s_flags are now called SB_*, with the names and the values for the
      moment mirroring the MS_* flags that they're equivalent to.
      
      Note how the MS_xyz flags are the ones passed to the mount system call,
      while the SB_xyz flags are what we then use in sb->s_flags.
      
      The script to do this was:
      
          # places to look in; re security/*: it generally should *not* be
          # touched (that stuff parses mount(2) arguments directly), but
          # there are two places where we really deal with superblock flags.
          FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
                  include/linux/fs.h include/uapi/linux/bfs_fs.h \
                  security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
          # the list of MS_... constants
          SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
                DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
                POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
                I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
                ACTIVE NOUSER"
      
          SED_PROG=
          for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
      
          # we want files that contain at least one of MS_...,
          # with fs/namespace.c and fs/pnode.c excluded.
          L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
      
          for f in $L; do sed -i $f $SED_PROG; done
      Requested-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1751e8a6
  18. 02 Nov, 2017 1 commit
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman authored
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  19. 17 Oct, 2017 1 commit