Commit e8610894 authored by Mathias Nyman's avatar Mathias Nyman Committed by Greg Kroah-Hartman

usb: hub: delay hub autosuspend if USB3 port is still link training

When initializing a hub we want to give a USB3 port in link training
the same debounce delay time before autosuspening the hub as already
trained, connected enabled ports.

USB3 ports won't reach the enabled state with "current connect status" and
"connect status change" bits set until the USB3 link training finishes.

Catching the port in link training (polling) and adding the debounce delay
prevents unnecessary failed attempts to autosuspend the hub.
Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 44c94100
......@@ -1112,6 +1112,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
USB_PORT_FEAT_ENABLE);
}
/*
* Add debounce if USB3 link is in polling/link training state.
* Link will automatically transition to Enabled state after
* link training completes.
*/
if (hub_is_superspeed(hdev) &&
((portstatus & USB_PORT_STAT_LINK_STATE) ==
USB_SS_PORT_LS_POLLING))
need_debounce_delay = true;
/* Clear status-change flags; we'll debounce later */
if (portchange & USB_PORT_STAT_C_CONNECTION) {
need_debounce_delay = true;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment