Commit d6d4f60c authored by Lawrence Brakmo's avatar Lawrence Brakmo Committed by Alexei Starovoitov

bpf: add selftest for tcpbpf

Added a selftest for tcpbpf (sock_ops) that checks that the appropriate
callbacks occured and that it can access tcp_sock fields and that their
values are correct.

Run with command: ./test_tcpbpf_user
Adding the flag "-d" will show why it did not pass.
Signed-off-by: 's avatarLawrence Brakmo <brakmo@fb.com>
Acked-by: 's avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: 's avatarAlexei Starovoitov <ast@kernel.org>
parent d4487491
......@@ -17,7 +17,7 @@
#define BPF_ALU64 0x07 /* alu mode in double word width */
/* ld/ldx fields */
#define BPF_DW 0x18 /* double word */
#define BPF_DW 0x18 /* double word (64-bit) */
#define BPF_XADD 0xc0 /* exclusive add */
/* alu/jmp fields */
......@@ -642,6 +642,14 @@ union bpf_attr {
* @optlen: length of optval in bytes
* Return: 0 or negative error
*
* int bpf_sock_ops_cb_flags_set(bpf_sock_ops, flags)
* Set callback flags for sock_ops
* @bpf_sock_ops: pointer to bpf_sock_ops_kern struct
* @flags: flags value
* Return: 0 for no error
* -EINVAL if there is no full tcp socket
* bits in flags that are not supported by current kernel
*
* int bpf_skb_adjust_room(skb, len_diff, mode, flags)
* Grow or shrink room in sk_buff.
* @skb: pointer to skb
......@@ -748,7 +756,8 @@ union bpf_attr {
FN(perf_event_read_value), \
FN(perf_prog_read_value), \
FN(getsockopt), \
FN(override_return),
FN(override_return), \
FN(sock_ops_cb_flags_set),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
......@@ -952,8 +961,9 @@ struct bpf_map_info {
struct bpf_sock_ops {
__u32 op;
union {
__u32 reply;
__u32 replylong[4];
__u32 args[4]; /* Optionally passed to bpf program */
__u32 reply; /* Returned by bpf program */
__u32 replylong[4]; /* Optionally returned by bpf prog */
};
__u32 family;
__u32 remote_ip4; /* Stored in network byte order */
......@@ -968,8 +978,39 @@ struct bpf_sock_ops {
*/
__u32 snd_cwnd;
__u32 srtt_us; /* Averaged RTT << 3 in usecs */
__u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */
__u32 state;
__u32 rtt_min;
__u32 snd_ssthresh;
__u32 rcv_nxt;
__u32 snd_nxt;
__u32 snd_una;
__u32 mss_cache;
__u32 ecn_flags;
__u32 rate_delivered;
__u32 rate_interval_us;
__u32 packets_out;
__u32 retrans_out;
__u32 total_retrans;
__u32 segs_in;
__u32 data_segs_in;
__u32 segs_out;
__u32 data_segs_out;
__u32 lost_out;
__u32 sacked_out;
__u32 sk_txhash;
__u64 bytes_received;
__u64 bytes_acked;
};
/* Definitions for bpf_sock_ops_cb_flags */
#define BPF_SOCK_OPS_RTO_CB_FLAG (1<<0)
#define BPF_SOCK_OPS_RETRANS_CB_FLAG (1<<1)
#define BPF_SOCK_OPS_STATE_CB_FLAG (1<<2)
#define BPF_SOCK_OPS_ALL_CB_FLAGS 0x7 /* Mask of all currently
* supported cb flags
*/
/* List of known BPF sock_ops operators.
* New entries can only be added at the end
*/
......@@ -1003,6 +1044,43 @@ enum {
* a congestion threshold. RTTs above
* this indicate congestion
*/
BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered.
* Arg1: value of icsk_retransmits
* Arg2: value of icsk_rto
* Arg3: whether RTO has expired
*/
BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted.
* Arg1: sequence number of 1st byte
* Arg2: # segments
* Arg3: return value of
* tcp_transmit_skb (0 => success)
*/
BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state.
* Arg1: old_state
* Arg2: new_state
*/
};
/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
* changes between the TCP and BPF versions. Ideally this should never happen.
* If it does, we need to add code to convert them before calling
* the BPF sock_ops function.
*/
enum {
BPF_TCP_ESTABLISHED = 1,
BPF_TCP_SYN_SENT,
BPF_TCP_SYN_RECV,
BPF_TCP_FIN_WAIT1,
BPF_TCP_FIN_WAIT2,
BPF_TCP_TIME_WAIT,
BPF_TCP_CLOSE,
BPF_TCP_CLOSE_WAIT,
BPF_TCP_LAST_ACK,
BPF_TCP_LISTEN,
BPF_TCP_CLOSING, /* Now a valid state */
BPF_TCP_NEW_SYN_RECV,
BPF_TCP_MAX_STATES /* Leave at the end! */
};
#define TCP_BPF_IW 1001 /* Set TCP initial congestion window */
......
......@@ -14,13 +14,13 @@ CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(GENDIR) $(GENFLAGS) -I../../../i
LDLIBS += -lcap -lelf -lrt
TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
test_align test_verifier_log test_dev_cgroup
test_align test_verifier_log test_dev_cgroup test_tcpbpf_user
TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \
test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o \
sockmap_verdict_prog.o dev_cgroup.o sample_ret0.o test_tracepoint.o \
test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \
sample_map_ret0.o
sample_map_ret0.o test_tcpbpf_kern.o
TEST_PROGS := test_kmod.sh test_xdp_redirect.sh test_xdp_meta.sh \
test_offload.py
......
......@@ -71,6 +71,8 @@ static int (*bpf_setsockopt)(void *ctx, int level, int optname, void *optval,
static int (*bpf_getsockopt)(void *ctx, int level, int optname, void *optval,
int optlen) =
(void *) BPF_FUNC_getsockopt;
static int (*bpf_sock_ops_cb_flags_set)(void *ctx, int flags) =
(void *) BPF_FUNC_sock_ops_cb_flags_set;
static int (*bpf_sk_redirect_map)(void *ctx, void *map, int key, int flags) =
(void *) BPF_FUNC_sk_redirect_map;
static int (*bpf_sock_map_update)(void *map, void *key, void *value,
......
#!/usr/bin/env python2
#
# SPDX-License-Identifier: GPL-2.0
#
import sys, os, os.path, getopt
import socket, time
import subprocess
import select
def read(sock, n):
buf = ''
while len(buf) < n:
rem = n - len(buf)
try: s = sock.recv(rem)
except (socket.error), e: return ''
buf += s
return buf
def send(sock, s):
total = len(s)
count = 0
while count < total:
try: n = sock.send(s)
except (socket.error), e: n = 0
if n == 0:
return count;
count += n
return count
serverPort = int(sys.argv[1])
HostName = socket.gethostname()
# create active socket
sock = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
try:
sock.connect((HostName, serverPort))
except socket.error as e:
sys.exit(1)
buf = ''
n = 0
while n < 1000:
buf += '+'
n += 1
sock.settimeout(1);
n = send(sock, buf)
n = read(sock, 500)
sys.exit(0)
#!/usr/bin/env python2
#
# SPDX-License-Identifier: GPL-2.0
#
import sys, os, os.path, getopt
import socket, time
import subprocess
import select
def read(sock, n):
buf = ''
while len(buf) < n:
rem = n - len(buf)
try: s = sock.recv(rem)
except (socket.error), e: return ''
buf += s
return buf
def send(sock, s):
total = len(s)
count = 0
while count < total:
try: n = sock.send(s)
except (socket.error), e: n = 0
if n == 0:
return count;
count += n
return count
SERVER_PORT = 12877
MAX_PORTS = 2
serverPort = SERVER_PORT
serverSocket = None
HostName = socket.gethostname()
# create passive socket
serverSocket = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
host = socket.gethostname()
try: serverSocket.bind((host, 0))
except socket.error as msg:
print 'bind fails: ', msg
sn = serverSocket.getsockname()
serverPort = sn[1]
cmdStr = ("./tcp_client.py %d &") % (serverPort)
os.system(cmdStr)
buf = ''
n = 0
while n < 500:
buf += '.'
n += 1
serverSocket.listen(MAX_PORTS)
readList = [serverSocket]
while True:
readyRead, readyWrite, inError = \
select.select(readList, [], [], 2)
if len(readyRead) > 0:
waitCount = 0
for sock in readyRead:
if sock == serverSocket:
(clientSocket, address) = serverSocket.accept()
address = str(address[0])
readList.append(clientSocket)
else:
sock.settimeout(1);
s = read(sock, 1000)
n = send(sock, buf)
sock.close()
serverSocket.close()
sys.exit(0)
else:
print 'Select timeout!'
sys.exit(1)
// SPDX-License-Identifier: GPL-2.0
#ifndef _TEST_TCPBPF_H
#define _TEST_TCPBPF_H
struct tcpbpf_globals {
__u32 event_map;
__u32 total_retrans;
__u32 data_segs_in;
__u32 data_segs_out;
__u32 bad_cb_test_rv;
__u32 good_cb_test_rv;
__u64 bytes_received;
__u64 bytes_acked;
};
#endif
// SPDX-License-Identifier: GPL-2.0
#include <stddef.h>
#include <string.h>
#include <linux/bpf.h>
#include <linux/if_ether.h>
#include <linux/if_packet.h>
#include <linux/ip.h>
#include <linux/in6.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/tcp.h>
#include <netinet/in.h>
#include "bpf_helpers.h"
#include "bpf_endian.h"
#include "test_tcpbpf.h"
struct bpf_map_def SEC("maps") global_map = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(__u32),
.value_size = sizeof(struct tcpbpf_globals),
.max_entries = 2,
};
static inline void update_event_map(int event)
{
__u32 key = 0;
struct tcpbpf_globals g, *gp;
gp = bpf_map_lookup_elem(&global_map, &key);
if (gp == NULL) {
struct tcpbpf_globals g = {0};
g.event_map |= (1 << event);
bpf_map_update_elem(&global_map, &key, &g,
BPF_ANY);
} else {
g = *gp;
g.event_map |= (1 << event);
bpf_map_update_elem(&global_map, &key, &g,
BPF_ANY);
}
}
int _version SEC("version") = 1;
SEC("sockops")
int bpf_testcb(struct bpf_sock_ops *skops)
{
int rv = -1;
int bad_call_rv = 0;
int good_call_rv = 0;
int op;
int v = 0;
op = (int) skops->op;
update_event_map(op);
switch (op) {
case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
/* Test failure to set largest cb flag (assumes not defined) */
bad_call_rv = bpf_sock_ops_cb_flags_set(skops, 0x80);
/* Set callback */
good_call_rv = bpf_sock_ops_cb_flags_set(skops,
BPF_SOCK_OPS_STATE_CB_FLAG);
/* Update results */
{
__u32 key = 0;
struct tcpbpf_globals g, *gp;
gp = bpf_map_lookup_elem(&global_map, &key);
if (!gp)
break;
g = *gp;
g.bad_cb_test_rv = bad_call_rv;
g.good_cb_test_rv = good_call_rv;
bpf_map_update_elem(&global_map, &key, &g,
BPF_ANY);
}
break;
case BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB:
/* Set callback */
// good_call_rv = bpf_sock_ops_cb_flags_set(skops,
// BPF_SOCK_OPS_STATE_CB_FLAG);
skops->sk_txhash = 0x12345f;
v = 0xff;
rv = bpf_setsockopt(skops, SOL_IPV6, IPV6_TCLASS, &v,
sizeof(v));
break;
case BPF_SOCK_OPS_RTO_CB:
break;
case BPF_SOCK_OPS_RETRANS_CB:
break;
case BPF_SOCK_OPS_STATE_CB:
if (skops->args[1] == BPF_TCP_CLOSE) {
__u32 key = 0;
struct tcpbpf_globals g, *gp;
gp = bpf_map_lookup_elem(&global_map, &key);
if (!gp)
break;
g = *gp;
g.total_retrans = skops->total_retrans;
g.data_segs_in = skops->data_segs_in;
g.data_segs_out = skops->data_segs_out;
g.bytes_received = skops->bytes_received;
g.bytes_acked = skops->bytes_acked;
bpf_map_update_elem(&global_map, &key, &g,
BPF_ANY);
}
break;
default:
rv = -1;
}
skops->reply = rv;
return 1;
}
char _license[] SEC("license") = "GPL";
// SPDX-License-Identifier: GPL-2.0
#include <stdio.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <errno.h>
#include <signal.h>
#include <string.h>
#include <assert.h>
#include <linux/perf_event.h>
#include <linux/ptrace.h>
#include <linux/bpf.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <bpf/bpf.h>
#include <bpf/libbpf.h>
#include "bpf_util.h"
#include <linux/perf_event.h>
#include "test_tcpbpf.h"
static int bpf_find_map(const char *test, struct bpf_object *obj,
const char *name)
{
struct bpf_map *map;
map = bpf_object__find_map_by_name(obj, name);
if (!map) {
printf("%s:FAIL:map '%s' not found\n", test, name);
return -1;
}
return bpf_map__fd(map);
}
#define SYSTEM(CMD) \
do { \
if (system(CMD)) { \
printf("system(%s) FAILS!\n", CMD); \
} \
} while (0)
int main(int argc, char **argv)
{
const char *file = "test_tcpbpf_kern.o";
struct tcpbpf_globals g = {0};
int cg_fd, prog_fd, map_fd;
bool debug_flag = false;
int error = EXIT_FAILURE;
struct bpf_object *obj;
char cmd[100], *dir;
struct stat buffer;
__u32 key = 0;
int pid;
int rv;
if (argc > 1 && strcmp(argv[1], "-d") == 0)
debug_flag = true;
dir = "/tmp/cgroupv2/foo";
if (stat(dir, &buffer) != 0) {
SYSTEM("mkdir -p /tmp/cgroupv2");
SYSTEM("mount -t cgroup2 none /tmp/cgroupv2");
SYSTEM("mkdir -p /tmp/cgroupv2/foo");
}
pid = (int) getpid();
sprintf(cmd, "echo %d >> /tmp/cgroupv2/foo/cgroup.procs", pid);
SYSTEM(cmd);
cg_fd = open(dir, O_DIRECTORY, O_RDONLY);
if (bpf_prog_load(file, BPF_PROG_TYPE_SOCK_OPS, &obj, &prog_fd)) {
printf("FAILED: load_bpf_file failed for: %s\n", file);
goto err;
}
rv = bpf_prog_attach(prog_fd, cg_fd, BPF_CGROUP_SOCK_OPS, 0);
if (rv) {
printf("FAILED: bpf_prog_attach: %d (%s)\n",
error, strerror(errno));
goto err;
}
SYSTEM("./tcp_server.py");
map_fd = bpf_find_map(__func__, obj, "global_map");
if (map_fd < 0)
goto err;
rv = bpf_map_lookup_elem(map_fd, &key, &g);
if (rv != 0) {
printf("FAILED: bpf_map_lookup_elem returns %d\n", rv);
goto err;
}
if (g.bytes_received != 501 || g.bytes_acked != 1002 ||
g.data_segs_in != 1 || g.data_segs_out != 1 ||
(g.event_map ^ 0x47e) != 0 || g.bad_cb_test_rv != 0x80 ||
g.good_cb_test_rv != 0) {
printf("FAILED: Wrong stats\n");
if (debug_flag) {
printf("\n");
printf("bytes_received: %d (expecting 501)\n",
(int)g.bytes_received);
printf("bytes_acked: %d (expecting 1002)\n",
(int)g.bytes_acked);
printf("data_segs_in: %d (expecting 1)\n",
g.data_segs_in);
printf("data_segs_out: %d (expecting 1)\n",
g.data_segs_out);
printf("event_map: 0x%x (at least 0x47e)\n",
g.event_map);
printf("bad_cb_test_rv: 0x%x (expecting 0x80)\n",
g.bad_cb_test_rv);
printf("good_cb_test_rv:0x%x (expecting 0)\n",
g.good_cb_test_rv);
}
goto err;
}
printf("PASSED!\n");
error = 0;
err:
bpf_prog_detach(cg_fd, BPF_CGROUP_SOCK_OPS);
return error;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment