Commit d31748be authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Samuel Ortiz

NFC: st21nfca: Get rid of code duplication in ->probe()

Since OF and ACPI case almost the same get rid of code duplication
by moving gpiod_get() calls directly to ->probe().
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 394671e7
......@@ -61,8 +61,6 @@
#define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci"
#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
#define ST21NFCA_GPIO_NAME_EN "enable"
struct st21nfca_i2c_phy {
struct i2c_client *i2c_dev;
struct nfc_hci_dev *hdev;
......@@ -508,44 +506,10 @@ static const struct acpi_gpio_mapping acpi_st21nfca_gpios[] = {
{},
};
static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client)
{
struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
struct device *dev = &client->dev;
int ret;
ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st21nfca_gpios);
if (ret)
return ret;
/* Get EN GPIO from ACPI */
phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_ena)) {
nfc_err(dev, "Unable to get ENABLE GPIO\n");
return PTR_ERR(phy->gpiod_ena);
}
return 0;
}
static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
{
struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
struct device *dev = &client->dev;
/* Get GPIO from device tree */
phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_HIGH);
if (IS_ERR(phy->gpiod_ena)) {
nfc_err(dev, "Failed to request enable pin\n");
return PTR_ERR(phy->gpiod_ena);
}
return 0;
}
static int st21nfca_hci_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct st21nfca_i2c_phy *phy;
int r;
......@@ -572,21 +536,15 @@ static int st21nfca_hci_i2c_probe(struct i2c_client *client,
mutex_init(&phy->phy_lock);
i2c_set_clientdata(client, phy);
if (client->dev.of_node) {
r = st21nfca_hci_i2c_of_request_resources(client);
if (r) {
nfc_err(&client->dev, "No platform data\n");
return r;
}
} else if (ACPI_HANDLE(&client->dev)) {
r = st21nfca_hci_i2c_acpi_request_resources(client);
if (r) {
nfc_err(&client->dev, "Cannot get ACPI data\n");
return r;
}
} else {
nfc_err(&client->dev, "st21nfca platform resources not available\n");
return -ENODEV;
r = devm_acpi_dev_add_driver_gpios(dev, acpi_st21nfca_gpios);
if (r)
dev_dbg(dev, "Unable to add GPIO mapping table\n");
/* Get EN GPIO from resource provider */
phy->gpiod_ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_ena)) {
nfc_err(dev, "Unable to get ENABLE GPIO\n");
return PTR_ERR(phy->gpiod_ena);
}
phy->se_status.is_ese_present =
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment