Commit b5f03484 authored by Linus Walleij's avatar Linus Walleij Committed by Gregory Clement

ARM: dts: kirkwood: Fix polarity of GPIO fan lines

These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.

Fixes: 1b90e06b ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin's avatarJamie Lentin <jm@lentin.co.uk>
Reported-by: default avatarJulien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: default avatarJulien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory Clement's avatarGregory CLEMENT <gregory.clement@bootlin.com>
parent 59c4dccb
...@@ -36,8 +36,8 @@ ...@@ -36,8 +36,8 @@
compatible = "gpio-fan"; compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default"; pinctrl-names = "default";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_LOW>; &gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0 gpio-fan,speed-map = <0 0
3000 1 3000 1
6000 2>; 6000 2>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment