Commit a86d2c87 authored by Tomi Valkeinen's avatar Tomi Valkeinen Committed by Greg Kroah-Hartman

drm/bridge: tc358767: fix output H/V syncs

[ Upstream commit 7923e09c ]

The H and V syncs of the DP output are always set to active high. This
patch fixes the syncs by configuring them according to the videomode.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
parent b5e7155e
......@@ -98,6 +98,8 @@
#define DP0_STARTVAL 0x064c
#define DP0_ACTIVEVAL 0x0650
#define DP0_SYNCVAL 0x0654
#define SYNCVAL_HS_POL_ACTIVE_LOW (1 << 15)
#define SYNCVAL_VS_POL_ACTIVE_LOW (1 << 31)
#define DP0_MISC 0x0658
#define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */
#define BPC_6 (0 << 5)
......@@ -726,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment