Commit 9815c7cf authored by Michael Thalmeier's avatar Michael Thalmeier Committed by Samuel Ortiz

NFC: pn533: Separate physical layer from the core implementation

The driver now has all core stuff isolated in one file, and all
the hardware link specifics in another. Writing a pn533 driver
on top of another hardware link is now just a matter of adding a
new file for that new hardware specifics.

The first user of this separation will be the i2c based pn532
driver that reuses pn533 core implementation on top of an i2c
layer.
Signed-off-by: default avatarMichael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 37f895d7
......@@ -5,16 +5,6 @@
menu "Near Field Communication (NFC) devices"
depends on NFC
config NFC_PN533
tristate "NXP PN533 USB driver"
depends on USB
help
NXP PN533 USB driver.
This driver provides support for NFC NXP PN533 devices.
Say Y here to compile support for PN533 devices into the
kernel or say M to compile it as module (pn533).
config NFC_WILINK
tristate "Texas Instruments NFC WiLink driver"
depends on TI_ST && NFC_NCI
......@@ -70,6 +60,7 @@ config NFC_PORT100
source "drivers/nfc/fdp/Kconfig"
source "drivers/nfc/pn544/Kconfig"
source "drivers/nfc/pn533/Kconfig"
source "drivers/nfc/microread/Kconfig"
source "drivers/nfc/nfcmrvl/Kconfig"
source "drivers/nfc/st21nfca/Kconfig"
......
......@@ -5,7 +5,7 @@
obj-$(CONFIG_NFC_FDP) += fdp/
obj-$(CONFIG_NFC_PN544) += pn544/
obj-$(CONFIG_NFC_MICROREAD) += microread/
obj-$(CONFIG_NFC_PN533) += pn533.o
obj-$(CONFIG_NFC_PN533) += pn533/
obj-$(CONFIG_NFC_WILINK) += nfcwilink.o
obj-$(CONFIG_NFC_MEI_PHY) += mei_phy.o
obj-$(CONFIG_NFC_SIM) += nfcsim.o
......
config NFC_PN533
tristate
help
NXP PN533 core driver.
This driver provides core functionality for NXP PN533 NFC devices.
config NFC_PN533_USB
tristate "NFC PN533 device support (USB)"
depends on USB
select NFC_PN533
---help---
This module adds support for the NXP pn533 USB interface.
Select this if your platform is using the USB bus.
If you choose to build a module, it'll be called pn533_usb.
Say N if unsure.
#
# Makefile for PN533 NFC driver
#
pn533_usb-objs = usb.o
obj-$(CONFIG_NFC_PN533) += pn533.o
obj-$(CONFIG_NFC_PN533_USB) += pn533_usb.o
/*
* Driver for NXP PN533 NFC Chip
*
* Copyright (C) 2011 Instituto Nokia de Tecnologia
* Copyright (C) 2012-2013 Tieto Poland
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#define PN533_DEVICE_STD 0x1
#define PN533_DEVICE_PASORI 0x2
#define PN533_DEVICE_ACR122U 0x3
#define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK |\
NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK |\
NFC_PROTO_NFC_DEP_MASK |\
NFC_PROTO_ISO14443_B_MASK)
#define PN533_NO_TYPE_B_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \
NFC_PROTO_MIFARE_MASK | \
NFC_PROTO_FELICA_MASK | \
NFC_PROTO_ISO14443_MASK | \
NFC_PROTO_NFC_DEP_MASK)
/* Standard pn533 frame definitions (standard and extended)*/
#define PN533_STD_FRAME_HEADER_LEN (sizeof(struct pn533_std_frame) \
+ 2) /* data[0] TFI, data[1] CC */
#define PN533_STD_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/
#define PN533_EXT_FRAME_HEADER_LEN (sizeof(struct pn533_ext_frame) \
+ 2) /* data[0] TFI, data[1] CC */
#define PN533_CMD_DATAEXCH_HEAD_LEN 1
#define PN533_CMD_DATAEXCH_DATA_MAXLEN 262
#define PN533_CMD_DATAFRAME_MAXLEN 240 /* max data length (send) */
/*
* Max extended frame payload len, excluding TFI and CC
* which are already in PN533_FRAME_HEADER_LEN.
*/
#define PN533_STD_FRAME_MAX_PAYLOAD_LEN 263
/* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */
#define PN533_STD_FRAME_ACK_SIZE 6
#define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen])
#define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1])
/* Half start code (3), LEN (4) should be 0xffff for extended frame */
#define PN533_STD_IS_EXTENDED(hdr) ((hdr)->datalen == 0xFF \
&& (hdr)->datalen_checksum == 0xFF)
#define PN533_EXT_FRAME_CHECKSUM(f) (f->data[be16_to_cpu(f->datalen)])
/* start of frame */
#define PN533_STD_FRAME_SOF 0x00FF
/* standard frame identifier: in/out/error */
#define PN533_STD_FRAME_IDENTIFIER(f) (f->data[0]) /* TFI */
#define PN533_STD_FRAME_DIR_OUT 0xD4
#define PN533_STD_FRAME_DIR_IN 0xD5
/* PN533 Commands */
#define PN533_FRAME_CMD(f) (f->data[1])
#define PN533_CMD_GET_FIRMWARE_VERSION 0x02
#define PN533_CMD_RF_CONFIGURATION 0x32
#define PN533_CMD_IN_DATA_EXCHANGE 0x40
#define PN533_CMD_IN_COMM_THRU 0x42
#define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A
#define PN533_CMD_IN_ATR 0x50
#define PN533_CMD_IN_RELEASE 0x52
#define PN533_CMD_IN_JUMP_FOR_DEP 0x56
#define PN533_CMD_TG_INIT_AS_TARGET 0x8c
#define PN533_CMD_TG_GET_DATA 0x86
#define PN533_CMD_TG_SET_DATA 0x8e
#define PN533_CMD_TG_SET_META_DATA 0x94
#define PN533_CMD_UNDEF 0xff
#define PN533_CMD_RESPONSE(cmd) (cmd + 1)
/* PN533 Return codes */
#define PN533_CMD_RET_MASK 0x3F
#define PN533_CMD_MI_MASK 0x40
#define PN533_CMD_RET_SUCCESS 0x00
enum pn533_protocol_type {
PN533_PROTO_REQ_ACK_RESP = 0,
PN533_PROTO_REQ_RESP
};
/* Poll modulations */
enum {
PN533_POLL_MOD_106KBPS_A,
PN533_POLL_MOD_212KBPS_FELICA,
PN533_POLL_MOD_424KBPS_FELICA,
PN533_POLL_MOD_106KBPS_JEWEL,
PN533_POLL_MOD_847KBPS_B,
PN533_LISTEN_MOD,
__PN533_POLL_MOD_AFTER_LAST,
};
#define PN533_POLL_MOD_MAX (__PN533_POLL_MOD_AFTER_LAST - 1)
struct pn533_std_frame {
u8 preamble;
__be16 start_frame;
u8 datalen;
u8 datalen_checksum;
u8 data[];
} __packed;
struct pn533_ext_frame { /* Extended Information frame */
u8 preamble;
__be16 start_frame;
__be16 eif_flag; /* fixed to 0xFFFF */
__be16 datalen;
u8 datalen_checksum;
u8 data[];
} __packed;
struct pn533 {
struct nfc_dev *nfc_dev;
u32 device_type;
enum pn533_protocol_type protocol_type;
struct sk_buff_head resp_q;
struct sk_buff_head fragment_skb;
struct workqueue_struct *wq;
struct work_struct cmd_work;
struct work_struct cmd_complete_work;
struct delayed_work poll_work;
struct work_struct mi_rx_work;
struct work_struct mi_tx_work;
struct work_struct mi_tm_rx_work;
struct work_struct mi_tm_tx_work;
struct work_struct tg_work;
struct work_struct rf_work;
struct list_head cmd_queue;
struct pn533_cmd *cmd;
u8 cmd_pending;
struct mutex cmd_lock; /* protects cmd queue */
void *cmd_complete_mi_arg;
void *cmd_complete_dep_arg;
struct pn533_poll_modulations *poll_mod_active[PN533_POLL_MOD_MAX + 1];
u8 poll_mod_count;
u8 poll_mod_curr;
u8 poll_dep;
u32 poll_protocols;
u32 listen_protocols;
struct timer_list listen_timer;
int cancel_listen;
u8 *gb;
size_t gb_len;
u8 tgt_available_prots;
u8 tgt_active_prot;
u8 tgt_mode;
struct pn533_frame_ops *ops;
struct device *dev;
void *phy;
struct pn533_phy_ops *phy_ops;
};
typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg,
struct sk_buff *resp);
struct pn533_cmd {
struct list_head queue;
u8 code;
int status;
struct sk_buff *req;
struct sk_buff *resp;
pn533_send_async_complete_t complete_cb;
void *complete_cb_context;
};
struct pn533_frame_ops {
void (*tx_frame_init)(void *frame, u8 cmd_code);
void (*tx_frame_finish)(void *frame);
void (*tx_update_payload_len)(void *frame, int len);
int tx_header_len;
int tx_tail_len;
bool (*rx_is_frame_valid)(void *frame, struct pn533 *dev);
bool (*rx_frame_is_ack)(void *frame);
int (*rx_frame_size)(void *frame);
int rx_header_len;
int rx_tail_len;
int max_payload_len;
u8 (*get_cmd_code)(void *frame);
};
struct pn533_phy_ops {
int (*send_frame)(struct pn533 *priv,
struct sk_buff *out);
int (*send_ack)(struct pn533 *dev, gfp_t flags);
void (*abort_cmd)(struct pn533 *priv, gfp_t flags);
};
struct pn533 *pn533_register_device(u32 device_type,
u32 protocols,
enum pn533_protocol_type protocol_type,
void *phy,
struct pn533_phy_ops *phy_ops,
struct pn533_frame_ops *fops,
struct device *dev);
void pn533_unregister_device(struct pn533 *priv);
void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status);
bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame);
bool pn533_rx_frame_is_ack(void *_frame);
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment