Commit 83fc61a5 authored by Masanari Iida's avatar Masanari Iida Committed by Jiri Kosina

treewide: Fix typos in Kconfig

This patch fixes some spelling typos found in Kconfig files.
Signed-off-by: Masanari Iida's avatarMasanari Iida <standby24x7@gmail.com>
Acked-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 24d654fa
......@@ -505,7 +505,7 @@ config ALPHA_QEMU
Generic kernels will auto-detect QEMU. But when building a
system-specific kernel, the assumption is that we want to
elimiate as many runtime tests as possible.
eliminate as many runtime tests as possible.
If unsure, say N.
......
......@@ -298,7 +298,7 @@ config ARC_MMU_V1
config ARC_MMU_V2
bool "MMU v2"
help
Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
Fixed the deficiency of v1 - possible thrashing in memcpy scenario
when 2 D-TLB and 1 I-TLB entries index into same 2way set.
config ARC_MMU_V3
......@@ -371,7 +371,7 @@ config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
default n
help
Double Precision Floating Point unit had dedictaed regs which
Double Precision Floating Point unit had dedicated regs which
need to be saved/restored across context-switch.
Note that ARC FPU is overly simplistic, unlike say x86, which has
hardware pieces to allow software to conditionally save/restore,
......@@ -467,7 +467,7 @@ config ARC_PLAT_NEEDS_PHYS_TO_DMA
bool
config ARC_KVADDR_SIZE
int "Kernel Virtaul Address Space size (MB)"
int "Kernel Virtual Address Space size (MB)"
range 0 512
default "256"
help
......
......@@ -22,7 +22,7 @@ config ARCH_BCM_IPROC
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
core periperals. Application specific SoCs are created by adding a
core peripherals. Application specific SoCs are created by adding a
uArchitecture containing peripherals outside of the IPROC complex.
Currently supported SoCs are Cygnus.
......@@ -68,8 +68,8 @@ config ARCH_BCM_5301X
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
This is a network SoC line mostly used in home routers and
wifi access points, it's internal name is Northstar.
This inclused the following SoC: BCM53010, BCM53011, BCM53012,
wifi access points, its internal name is Northstar.
This includes the following SoC: BCM53010, BCM53011, BCM53012,
BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
BCM4708 and BCM4709.
......
......@@ -278,7 +278,7 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
the CRC data block will take more memory, but wil identify any
the CRC data block will take more memory, but will identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
......
......@@ -946,7 +946,7 @@ config ARM64_UAO
help
User Access Override (UAO; part of the ARMv8.2 Extensions)
causes the 'unprivileged' variant of the load/store instructions to
be overriden to be privileged.
be overridden to be privileged.
This option changes get_user() and friends to use the 'unprivileged'
variant of the load/store instructions. This ensures that user-space
......
......@@ -78,7 +78,7 @@ config UDBG_RTAS_CONSOLE
config PPC_SMP_MUXED_IPI
bool
help
Select this opton if your platform supports SMP and your
Select this option if your platform supports SMP and your
interrupt controller provides less than 4 interrupts to each
cpu. This will enable the generic code to multiplex the 4
messages on to one ipi.
......
......@@ -114,7 +114,7 @@ endif
source "arch/unicore32/mm/Kconfig"
comment "Floating poing support"
comment "Floating point support"
config UNICORE_FPU_F64
def_bool y if !ARCH_FPGA
......
......@@ -223,7 +223,7 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
then enter your normal kernel breakpoints once the MMU was mapped
to the kernel mappings (0XC0000000).
This unfortunately doesn't work for U-Boot and likley also wont
This unfortunately won't work for U-Boot and likely also wont
work for using KEXEC to have a hot kernel ready for doing a
KDUMP.
......
......@@ -9,7 +9,7 @@ config NET_VENDOR_AQUANTIA
Set this to y if you have an Ethernet network cards that uses the aQuantia
AQC107/AQC108 chipset.
This option does not build any drivers; it casues the aQuantia
This option does not build any drivers; it causes the aQuantia
drivers that can be built to appear in the list of Ethernet drivers.
......
......@@ -11,7 +11,7 @@ config NFC_ST_NCI_I2C
select NFC_ST_NCI
---help---
This module adds support for an I2C interface to the
STMicroelectronics NFC NCI chips familly.
STMicroelectronics NFC NCI chips family.
Select this if your platform is using the i2c bus.
If you choose to build a module, it'll be called st-nci_i2c.
......@@ -23,7 +23,7 @@ config NFC_ST_NCI_SPI
select NFC_ST_NCI
---help---
This module adds support for an SPI interface to the
STMicroelectronics NFC NCI chips familly.
STMicroelectronics NFC NCI chips family.
Select this if your platform is using the spi bus.
If you choose to build a module, it'll be called st-nci_spi.
......
......@@ -96,7 +96,7 @@ config NVDIMM_DAX
help
Support raw device dax access to a persistent memory
namespace. For environments that want to hard partition
peristent memory, this capability provides a mechanism to
persistent memory, this capability provides a mechanism to
sub-divide a namespace into character devices that can only be
accessed via DAX (mmap(2)).
......
......@@ -774,7 +774,7 @@ config TOSHIBA_WMI
WARNING: This driver is incomplete as it lacks a proper keymap and the
*notify function only prints the ACPI event type value. Be warned that
you will need to provide some information if you have a Toshiba model
with WMI event hotkeys and want to help with the develpment of this
with WMI event hotkeys and want to help with the development of this
driver.
If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
......
......@@ -182,7 +182,7 @@ config CHARGER_SBS
tristate "SBS Compliant charger"
depends on I2C
help
Say Y to include support for SBS compilant battery chargers.
Say Y to include support for SBS compliant battery chargers.
config BATTERY_BQ27XXX
tristate "BQ27xxx battery driver"
......
......@@ -786,7 +786,7 @@ config SCSI_IBMVSCSIS
depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
help
This is the IBM POWER Virtual SCSI Target Server
This driver uses the SRP protocol for communication betwen servers
This driver uses the SRP protocol for communication between servers
guest and/or the host that run on the same server.
More information on VSCSI protocol can be found at www.power.org
......
......@@ -21,6 +21,6 @@ config FANOTIFY_ACCESS_PERMISSIONS
decisions concerning filesystem events. This is used by some fanotify
listeners which need to scan files before allowing the system access to
use those files. This is used by some anti-malware vendors and by some
hierarchical storage managent systems.
hierarchical storage management systems.
If unsure, say N.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment