Commit 574e2af7 authored by Joe Perches's avatar Joe Perches Committed by David S. Miller

include: Convert ethernet mac address declarations to use ETH_ALEN

It's convenient to have ethernet mac addresses use
ETH_ALEN to be able to grep for them a bit easier and
also to ensure that the addresses are __aligned(2).

Add #include <linux/if_ether.h> as necessary.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Acked-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e216975a
......@@ -14,6 +14,8 @@
#ifndef __DM9000_PLATFORM_DATA
#define __DM9000_PLATFORM_DATA __FILE__
#include <linux/if_ether.h>
/* IO control flags */
#define DM9000_PLATF_8BITONLY (0x0001)
......@@ -27,7 +29,7 @@
struct dm9000_plat_data {
unsigned int flags;
unsigned char dev_addr[6];
unsigned char dev_addr[ETH_ALEN];
/* allow replacement IO routines */
......
......@@ -18,6 +18,7 @@
#include <linux/string.h>
#include <linux/of_mdio.h>
#include <linux/if_ether.h>
#include <asm/types.h>
#define FS_ENET_NAME "fs_enet"
......@@ -135,7 +136,7 @@ struct fs_platform_info {
const struct fs_mii_bus_info *bus_info;
int rx_ring, tx_ring; /* number of buffers on rx */
__u8 macaddr[6]; /* mac address */
__u8 macaddr[ETH_ALEN]; /* mac address */
int rx_copybreak; /* limit we copy small frames */
int use_napi; /* use NAPI */
int napi_weight; /* NAPI weight */
......
......@@ -16,6 +16,7 @@
#define LINUX_IEEE80211_H
#include <linux/types.h>
#include <linux/if_ether.h>
#include <asm/byteorder.h>
/*
......@@ -209,28 +210,28 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
struct ieee80211_hdr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[6];
u8 addr2[6];
u8 addr3[6];
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
u8 addr4[6];
u8 addr4[ETH_ALEN];
} __packed __aligned(2);
struct ieee80211_hdr_3addr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[6];
u8 addr2[6];
u8 addr3[6];
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
} __packed __aligned(2);
struct ieee80211_qos_hdr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[6];
u8 addr2[6];
u8 addr3[6];
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
__le16 qos_ctrl;
} __packed __aligned(2);
......@@ -608,8 +609,8 @@ struct ieee80211s_hdr {
u8 flags;
u8 ttl;
__le32 seqnum;
u8 eaddr1[6];
u8 eaddr2[6];
u8 eaddr1[ETH_ALEN];
u8 eaddr2[ETH_ALEN];
} __packed __aligned(2);
/* Mesh flags */
......@@ -758,7 +759,7 @@ struct ieee80211_rann_ie {
u8 rann_flags;
u8 rann_hopcount;
u8 rann_ttl;
u8 rann_addr[6];
u8 rann_addr[ETH_ALEN];
__le32 rann_seq;
__le32 rann_interval;
__le32 rann_metric;
......@@ -802,9 +803,9 @@ enum ieee80211_vht_opmode_bits {
struct ieee80211_mgmt {
__le16 frame_control;
__le16 duration;
u8 da[6];
u8 sa[6];
u8 bssid[6];
u8 da[ETH_ALEN];
u8 sa[ETH_ALEN];
u8 bssid[ETH_ALEN];
__le16 seq_ctrl;
union {
struct {
......@@ -833,7 +834,7 @@ struct ieee80211_mgmt {
struct {
__le16 capab_info;
__le16 listen_interval;
u8 current_ap[6];
u8 current_ap[ETH_ALEN];
/* followed by SSID and Supported rates */
u8 variable[0];
} __packed reassoc_req;
......@@ -966,21 +967,21 @@ struct ieee80211_vendor_ie {
struct ieee80211_rts {
__le16 frame_control;
__le16 duration;
u8 ra[6];
u8 ta[6];
u8 ra[ETH_ALEN];
u8 ta[ETH_ALEN];
} __packed __aligned(2);
struct ieee80211_cts {
__le16 frame_control;
__le16 duration;
u8 ra[6];
u8 ra[ETH_ALEN];
} __packed __aligned(2);
struct ieee80211_pspoll {
__le16 frame_control;
__le16 aid;
u8 bssid[6];
u8 ta[6];
u8 bssid[ETH_ALEN];
u8 ta[ETH_ALEN];
} __packed __aligned(2);
/* TDLS */
......@@ -989,14 +990,14 @@ struct ieee80211_pspoll {
struct ieee80211_tdls_lnkie {
u8 ie_type; /* Link Identifier IE */
u8 ie_len;
u8 bssid[6];
u8 init_sta[6];
u8 resp_sta[6];
u8 bssid[ETH_ALEN];
u8 init_sta[ETH_ALEN];
u8 resp_sta[ETH_ALEN];
} __packed;
struct ieee80211_tdls_data {
u8 da[6];
u8 sa[6];
u8 da[ETH_ALEN];
u8 sa[ETH_ALEN];
__be16 ether_type;
u8 payload_type;
u8 category;
......@@ -1090,8 +1091,8 @@ struct ieee80211_p2p_noa_attr {
struct ieee80211_bar {
__le16 frame_control;
__le16 duration;
__u8 ra[6];
__u8 ta[6];
__u8 ra[ETH_ALEN];
__u8 ta[ETH_ALEN];
__le16 control;
__le16 start_seq_num;
} __packed;
......
......@@ -33,6 +33,7 @@
#ifndef MLX4_DEVICE_H
#define MLX4_DEVICE_H
#include <linux/if_ether.h>
#include <linux/pci.h>
#include <linux/completion.h>
#include <linux/radix-tree.h>
......@@ -620,7 +621,7 @@ struct mlx4_eth_av {
u8 dgid[16];
u32 reserved4[2];
__be16 vlan;
u8 mac[6];
u8 mac[ETH_ALEN];
};
union mlx4_ext_av {
......@@ -914,10 +915,10 @@ enum mlx4_net_trans_promisc_mode {
};
struct mlx4_spec_eth {
u8 dst_mac[6];
u8 dst_mac_msk[6];
u8 src_mac[6];
u8 src_mac_msk[6];
u8 dst_mac[ETH_ALEN];
u8 dst_mac_msk[ETH_ALEN];
u8 src_mac[ETH_ALEN];
u8 src_mac_msk[ETH_ALEN];
u8 ether_type_enable;
__be16 ether_type;
__be16 vlan_id_msk;
......
......@@ -34,6 +34,7 @@
#define MLX4_QP_H
#include <linux/types.h>
#include <linux/if_ether.h>
#include <linux/mlx4/device.h>
......@@ -143,7 +144,7 @@ struct mlx4_qp_path {
u8 feup;
u8 fvl_rx;
u8 reserved4[2];
u8 dmac[6];
u8 dmac[ETH_ALEN];
};
enum { /* fl */
......@@ -318,7 +319,7 @@ struct mlx4_wqe_datagram_seg {
__be32 dqpn;
__be32 qkey;
__be16 vlan;
u8 mac[6];
u8 mac[ETH_ALEN];
};
struct mlx4_wqe_lso_seg {
......
......@@ -6,6 +6,7 @@
#define __LINUX_MV643XX_ETH_H
#include <linux/mbus.h>
#include <linux/if_ether.h>
#define MV643XX_ETH_SHARED_NAME "mv643xx_eth"
#define MV643XX_ETH_NAME "mv643xx_eth_port"
......@@ -48,7 +49,7 @@ struct mv643xx_eth_platform_data {
* Use this MAC address if it is valid, overriding the
* address that is already in the hardware.
*/
u8 mac_addr[6];
u8 mac_addr[ETH_ALEN];
/*
* If speed is 0, autonegotiation is enabled.
......
......@@ -2,6 +2,7 @@
#define __ASM_SH_ETH_H__
#include <linux/phy.h>
#include <linux/if_ether.h>
enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
enum {
......@@ -18,7 +19,7 @@ struct sh_eth_plat_data {
phy_interface_t phy_interface;
void (*set_mdio_gate)(void *addr);
unsigned char mac_addr[6];
unsigned char mac_addr[ETH_ALEN];
unsigned no_ether_link:1;
unsigned ether_link_active_low:1;
unsigned needs_init:1;
......
......@@ -22,6 +22,7 @@
#define __LINUX_SMSC911X_H__
#include <linux/phy.h>
#include <linux/if_ether.h>
/* platform_device configuration data, should be assigned to
* the platform_device's dev.platform_data */
......@@ -31,7 +32,7 @@ struct smsc911x_platform_config {
unsigned int flags;
unsigned int shift;
phy_interface_t phy_interface;
unsigned char mac[6];
unsigned char mac[ETH_ALEN];
};
/* Constants for platform_device irq polarity configuration */
......
......@@ -32,6 +32,7 @@
#include <linux/types.h>
#include <linux/bitmap.h>
#include <linux/if_ether.h>
#define i1480_FW 0x00000303
/* #define i1480_FW 0x00000302 */
......@@ -130,7 +131,7 @@ enum { UWB_DRP_BACKOFF_WIN_MAX = 16 };
* it is also used to define headers sent down and up the wire/radio).
*/
struct uwb_mac_addr {
u8 data[6];
u8 data[ETH_ALEN];
} __attribute__((packed));
......@@ -568,7 +569,7 @@ struct uwb_rc_evt_confirm {
/* Device Address Management event. [WHCI] section 3.1.3.2. */
struct uwb_rc_evt_dev_addr_mgmt {
struct uwb_rceb rceb;
u8 baAddr[6];
u8 baAddr[ETH_ALEN];
u8 bResultCode;
} __attribute__((packed));
......
......@@ -12,6 +12,8 @@ enum tveeprom_audio_processor {
TVEEPROM_AUDPROC_OTHER,
};
#include <linux/if_ether.h>
struct tveeprom {
u32 has_radio;
/* If has_ir == 0, then it is unknown what the IR capabilities are,
......@@ -40,7 +42,7 @@ struct tveeprom {
u32 revision;
u32 serial_number;
char rev_str[5];
u8 MAC_address[6];
u8 MAC_address[ETH_ALEN];
};
void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
......
......@@ -32,6 +32,7 @@
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/if_ether.h>
#include <net/irda/irttp.h>
......@@ -161,7 +162,7 @@ struct irlan_provider_cb {
int access_type; /* Access type */
__u16 send_arb_val;
__u8 mac_address[6]; /* Generated MAC address for peer device */
__u8 mac_address[ETH_ALEN]; /* Generated MAC address for peer device */
};
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment