Commit 27dd65ac authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle

MIPS: Alchemy: devboards: wire up new PCMCIA driver.

Register the PCMCIA driver on all boards supported by it,
get rid of now-unused pcmcia macros in the board headers
(and subsequently empty pb1100/pb1500 ones).
Signed-off-by: default avatarManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 66213b3c
......@@ -2,7 +2,7 @@
# Alchemy Develboards
#
obj-y += prom.o bcsr.o
obj-y += prom.o bcsr.o platform.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1000) += pb1000/
obj-$(CONFIG_MIPS_PB1100) += pb1100/
......
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
......@@ -187,8 +187,12 @@ static int __init db1x00_init_irq(void)
#if defined(CONFIG_MIPS_MIRAGE)
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */
#elif defined(CONFIG_MIPS_DB1550)
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO_21, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO_22, IRQF_TRIGGER_LOW); /* STSCHG1# */
#else
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CD1# */
......
/*
* DBAu1xxx board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1xxx.h>
#include "../platform.h"
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
#define DB1XXX_HAS_PCMCIA
#endif
/* DB1xxx PCMCIA interrupt sources:
* CD0/1 GPIO0/3
* STSCHG0/1 GPIO1/4
* CARD0/1 GPIO2/5
* Db1550: 0/1, 21/22, 3/5
*/
#ifndef CONFIG_MIPS_DB1550
/* Db1000, Db1100, Db1500 */
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO_1
#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_2
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_3
#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO_4
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
#else
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO_21
#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_3
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_1
#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO_22
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
#endif
static int __init db1xxx_dev_init(void)
{
#ifdef DB1XXX_HAS_PCMCIA
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
DB1XXX_PCMCIA_CARD0,
DB1XXX_PCMCIA_CD0,
/*DB1XXX_PCMCIA_STSCHG0*/0,
0,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
DB1XXX_PCMCIA_CARD1,
DB1XXX_PCMCIA_CD1,
/*DB1XXX_PCMCIA_STSCHG1*/0,
0,
1);
#endif
return 0;
}
device_initcall(db1xxx_dev_init);
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
......@@ -29,7 +29,6 @@
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
......
/*
* Pb1100 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include "../platform.h"
static int __init pb1100_dev_init(void)
{
/* PCMCIA. single socket, identical to Pb1500 */
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
AU1000_GPIO_11, /* card */
AU1000_GPIO_9, /* insert */
/*AU1000_GPIO_10*/0, /* stschg */
0, /* eject */
0); /* id */
return 0;
}
device_initcall(pb1100_dev_init);
......@@ -28,6 +28,8 @@
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int mmc_activity;
static void pb1200mmc0_set_power(void *mmc_host, int state)
......@@ -170,8 +172,57 @@ static struct platform_device *board_platform_devices[] __initdata = {
static int __init board_register_devices(void)
{
#ifdef CONFIG_MIPS_PB1200
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
PB1200_PC0_INT,
PB1200_PC0_INSERT_INT,
/*PB1200_PC0_STSCHG_INT*/0,
PB1200_PC0_EJECT_INT,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00800000,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00840000 - 1,
PCMCIA_MEM_PSEUDO_PHYS + 0x00800000,
PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
PB1200_PC1_INT,
PB1200_PC1_INSERT_INT,
/*PB1200_PC1_STSCHG_INT*/0,
PB1200_PC1_EJECT_INT,
1);
#else
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
DB1200_PC0_INT,
DB1200_PC0_INSERT_INT,
/*DB1200_PC0_STSCHG_INT*/0,
DB1200_PC0_EJECT_INT,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
DB1200_PC1_INT,
DB1200_PC1_INSERT_INT,
/*DB1200_PC1_STSCHG_INT*/0,
DB1200_PC1_EJECT_INT,
1);
#endif
return platform_add_devices(board_platform_devices,
ARRAY_SIZE(board_platform_devices));
}
arch_initcall(board_register_devices);
device_initcall(board_register_devices);
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
......@@ -29,7 +29,6 @@
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
......@@ -156,6 +155,9 @@ void __init board_setup(void)
static int __init pb1500_init_irq(void)
{
set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* CARD0 */
set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
......
/*
* Pb1500 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include "../platform.h"
static int __init pb1500_dev_init(void)
{
/* PCMCIA. single socket, identical to Pb1500 */
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
AU1000_GPIO_11, /* card */
AU1000_GPIO_9, /* insert */
/*AU1000_GPIO_10*/0, /* stschg */
0, /* eject */
0); /* id */
return 0;
}
device_initcall(pb1500_dev_init);
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1550 board.
#
obj-y := board_setup.o
obj-y := board_setup.o platform.o
......@@ -33,6 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-au1x00/gpio.h>
#include <prom.h>
......@@ -70,6 +71,8 @@ void __init board_setup(void)
}
#endif
alchemy_gpio2_enable();
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
......@@ -88,6 +91,11 @@ static int __init pb1550_init_irq(void)
{
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_201_205, IRQF_TRIGGER_HIGH);
/* enable both PCMCIA card irqs in the shared line */
alchemy_gpio2_enable_int(201);
alchemy_gpio2_enable_int(202);
return 0;
}
......
/*
* Pb1550 board platform device registration
*
* Copyright (C) 2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include "../platform.h"
static int __init pb1550_dev_init(void)
{
/* Pb1550, like all others, also has statuschange irqs; however they're
* wired up on one of the Au1550's shared GPIO201_205 line, which also
* services the PCMCIA card interrupts. So we ignore statuschange and
* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
* drivers are used to shared irqs and b) statuschange isn't really use-
* ful anyway.
*/
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
AU1500_GPIO_201_205,
AU1000_GPIO_0,
0,
0,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00800000,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00840000 - 1,
PCMCIA_MEM_PSEUDO_PHYS + 0x00800000,
PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
AU1500_GPIO_201_205,
AU1000_GPIO_1,
0,
0,
1);
return 0;
}
device_initcall(pb1550_dev_init);
/*
* devoard misc stuff.
*/
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
/* register a pcmcia socket */
int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
unsigned long pseudo_attr_end,
unsigned long pseudo_mem_start,
unsigned long pseudo_mem_end,
unsigned long pseudo_io_start,
unsigned long pseudo_io_end,
int card_irq,
int cd_irq,
int stschg_irq,
int eject_irq,
int id)
{
int cnt, i, ret;
struct resource *sr;
struct platform_device *pd;
cnt = 5;
if (eject_irq)
cnt++;
if (stschg_irq)
cnt++;
sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL);
if (!sr)
return -ENOMEM;
pd = platform_device_alloc("db1xxx_pcmcia", id);
if (!pd) {
ret = -ENOMEM;
goto out;
}
sr[0].name = "pseudo-attr";
sr[0].flags = IORESOURCE_MEM;
sr[0].start = pseudo_attr_start;
sr[0].end = pseudo_attr_end;
sr[1].name = "pseudo-mem";
sr[1].flags = IORESOURCE_MEM;
sr[1].start = pseudo_mem_start;
sr[1].end = pseudo_mem_end;
sr[2].name = "pseudo-io";
sr[2].flags = IORESOURCE_MEM;
sr[2].start = pseudo_io_start;
sr[2].end = pseudo_io_end;
sr[3].name = "insert";
sr[3].flags = IORESOURCE_IRQ;
sr[3].start = sr[3].end = cd_irq;
sr[4].name = "card";
sr[4].flags = IORESOURCE_IRQ;
sr[4].start = sr[4].end = card_irq;
i = 5;
if (stschg_irq) {
sr[i].name = "insert";
sr[i].flags = IORESOURCE_IRQ;
sr[i].start = sr[i].end = cd_irq;
i++;
}
if (eject_irq) {
sr[i].name = "eject";
sr[i].flags = IORESOURCE_IRQ;
sr[i].start = sr[i].end = eject_irq;
}
pd->resource = sr;
pd->num_resources = cnt;
ret = platform_device_add(pd);
if (!ret)
return 0;
platform_device_put(pd);
out:
kfree(sr);
return ret;
}
#ifndef _DEVBOARD_PLATFORM_H_
#define _DEVBOARD_PLATFORM_H_
#include <linux/init.h>
int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
unsigned long pseudo_attr_len,
unsigned long pseudo_mem_start,
unsigned long pseudo_mem_end,
unsigned long pseudo_io_start,
unsigned long pseudo_io_end,
int card_irq,
int cd_irq,
int stschg_irq,
int eject_irq,
int id);
#endif
......@@ -103,21 +103,6 @@ enum external_pb1200_ints {
DB1200_INT_END = DB1200_INT_BEGIN + 15,
};
/*
* DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
*/
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT) \
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#define BOARD_PC0_INT DB1200_PC0_INT
#define BOARD_PC1_INT DB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) (bcsr_read(BCSR_SIGSTAT) & (1 << (8 + (2 * SOCKET))))
/* NAND chip select */
#define NAND_CS 1
......
......@@ -45,14 +45,6 @@
#endif
/* PCMCIA DBAu1x00 specific defines */
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
/*
* NAND defines
*
......
/*
* Alchemy Semi Pb1100 Referrence Board
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#ifndef __ASM_PB1100_H
#define __ASM_PB1100_H
/* PCMCIA Pb1100 specific defines */
#define PCMCIA_MAX_SOCK 0
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1100_H */
......@@ -135,20 +135,6 @@ enum external_pb1200_ints {
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
/*
* Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
*/
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT) \
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#define BOARD_PC0_INT PB1200_PC0_INT
#define BOARD_PC1_INT PB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) (bcsr_read(BCSR_SIGSTAT & (1 << (8 + (2 * SOCKET))))
/* NAND chip select */
#define NAND_CS 1
......
/*
* Alchemy Semi Pb1500 Referrence Board
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#ifndef __ASM_PB1500_H
#define __ASM_PB1500_H
/* PCMCIA Pb1500 specific defines */
#define PCMCIA_MAX_SOCK 0
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1500_H */
......@@ -40,13 +40,6 @@
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
#define PCMCIA_MAX_SOCK 1
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT) \
((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment