Commit 206aa6cd authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle

MIPS: Alchemy: physmap-flash for all devboards

Replace the devboard NOR MTD mapping driver with physmap-flash support.
Also honor the "swapboot" switch settings wrt. to the layout of the
NOR partitions.
Signed-off-by: default avatarManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Acked-By: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 8facefd0
......@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
/* DB1xxx PCMCIA interrupt sources:
......@@ -32,6 +33,7 @@
*/
#define DB1XXX_HAS_PCMCIA
#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
#if defined(CONFIG_MIPS_DB1000)
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT
......@@ -40,6 +42,8 @@
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#elif defined(CONFIG_MIPS_DB1100)
#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT
......@@ -47,6 +51,8 @@
#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#elif defined(CONFIG_MIPS_DB1500)
#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT
......@@ -54,6 +60,8 @@
#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#elif defined(CONFIG_MIPS_DB1550)
#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT
......@@ -61,9 +69,20 @@
#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT
#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT
#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#else
/* other board: no PCMCIA */
#undef DB1XXX_HAS_PCMCIA
#undef F_SWAPPED
#define F_SWAPPED 0
#if defined(CONFIG_MIPS_BOSPORUS)
#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
#define BOARD_FLASH_WIDTH 2 /* 16-bits */
#elif defined(CONFIG_MIPS_MIRAGE)
#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#endif
static int __init db1xxx_dev_init(void)
......@@ -93,6 +112,7 @@ static int __init db1xxx_dev_init(void)
0,
1);
#endif
db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
return 0;
}
device_initcall(db1xxx_dev_init);
......@@ -31,6 +31,7 @@
#include <asm/mach-pb1x00/pb1000.h>
#include <prom.h>
#include "../platform.h"
const char *get_system_type(void)
{
......@@ -194,3 +195,9 @@ static int __init pb1000_init_irq(void)
return 0;
}
arch_initcall(pb1000_init_irq);
static int __init pb1000_device_init(void)
{
return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
}
device_initcall(pb1000_device_init);
......@@ -21,11 +21,14 @@
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int __init pb1100_dev_init(void)
{
int swapped;
/* PCMCIA. single socket, identical to Pb1500 */
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
......@@ -38,6 +41,10 @@ static int __init pb1100_dev_init(void)
/*AU1100_GPIO10_INT*/0, /* stschg */
0, /* eject */
0); /* id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
return 0;
}
device_initcall(pb1100_dev_init);
......@@ -172,6 +172,8 @@ static struct platform_device *board_platform_devices[] __initdata = {
static int __init board_register_devices(void)
{
int swapped;
#ifdef CONFIG_MIPS_PB1200
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
......@@ -222,6 +224,13 @@ static int __init board_register_devices(void)
1);
#endif
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
#ifdef CONFIG_MIPS_PB1200
db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
#else
db1x_register_norflash(64 * 1024 * 1024, 2, swapped);
#endif
return platform_add_devices(board_platform_devices,
ARRAY_SIZE(board_platform_devices));
}
......
......@@ -20,11 +20,14 @@
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int __init pb1500_dev_init(void)
{
int swapped;
/* PCMCIA. single socket, identical to Pb1500 */
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
......@@ -37,6 +40,10 @@ static int __init pb1500_dev_init(void)
/*AU1500_GPIO10_INT*/0, /* stschg */
0, /* eject */
0); /* id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
return 0;
}
device_initcall(pb1500_dev_init);
......@@ -22,11 +22,14 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
static int __init pb1550_dev_init(void)
{
int swapped;
/* Pb1550, like all others, also has statuschange irqs; however they're
* wired up on one of the Au1550's shared GPIO201_205 line, which also
* services the PCMCIA card interrupts. So we ignore statuschange and
......@@ -58,6 +61,9 @@ static int __init pb1550_dev_init(void)
0,
1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
return 0;
}
device_initcall(pb1550_dev_init);
......@@ -3,6 +3,9 @@
*/
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
......@@ -87,3 +90,104 @@ int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
kfree(sr);
return ret;
}
#define YAMON_SIZE 0x00100000
#define YAMON_ENV_SIZE 0x00040000
int __init db1x_register_norflash(unsigned long size, int width,
int swapped)
{
struct physmap_flash_data *pfd;
struct platform_device *pd;
struct mtd_partition *parts;
struct resource *res;
int ret, i;
if (size < (8 * 1024 * 1024))
return -EINVAL;
ret = -ENOMEM;
parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
if (!parts)
goto out;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
goto out1;
pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL);
if (!pfd)
goto out2;
pd = platform_device_alloc("physmap-flash", 0);
if (!pd)
goto out3;
/* NOR flash ends at 0x20000000, regardless of size */
res->start = 0x20000000 - size;
res->end = 0x20000000 - 1;
res->flags = IORESOURCE_MEM;
/* partition setup. Most Develboards have a switch which allows
* to swap the physical locations of the 2 NOR flash banks.
*/
i = 0;
if (!swapped) {
/* first NOR chip */
parts[i].offset = 0;
parts[i].name = "User FS";
parts[i].size = size / 2;
i++;
}
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "User FS 2";
parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000);
i++;
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "YAMON";
parts[i].size = YAMON_SIZE;
parts[i].mask_flags = MTD_WRITEABLE;
i++;
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "raw kernel";
parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE;
i++;
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "YAMON Env";
parts[i].size = YAMON_ENV_SIZE;
parts[i].mask_flags = MTD_WRITEABLE;
i++;
if (swapped) {
parts[i].offset = MTDPART_OFS_APPEND;
parts[i].name = "User FS";
parts[i].size = size / 2;
i++;
}
pfd->width = width;
pfd->parts = parts;
pfd->nr_parts = 5;
pd->dev.platform_data = pfd;
pd->resource = res;
pd->num_resources = 1;
ret = platform_device_add(pd);
if (!ret)
return ret;
platform_device_put(pd);
out3:
kfree(pfd);
out2:
kfree(res);
out1:
kfree(parts);
out:
return ret;
}
......@@ -15,4 +15,7 @@ int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
int eject_irq,
int id);
int __init db1x_register_norflash(unsigned long size, int width,
int swapped);
#endif
......@@ -251,12 +251,6 @@ config MTD_NETtel
help
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
config MTD_ALCHEMY
tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support"
depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
......
......@@ -40,7 +40,6 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
......
/*
* Flash memory access on AMD Alchemy evaluation boards
*
* (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#ifdef CONFIG_MIPS_PB1000
#define BOARD_MAP_NAME "Pb1000 Flash"
#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_PB1500
#define BOARD_MAP_NAME "Pb1500 Flash"
#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_PB1100
#define BOARD_MAP_NAME "Pb1100 Flash"
#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_PB1550
#define BOARD_MAP_NAME "Pb1550 Flash"
#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_PB1200
#define BOARD_MAP_NAME "Pb1200 Flash"
#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
#define BOARD_FLASH_WIDTH 2 /* 16-bits */
#endif
#ifdef CONFIG_MIPS_DB1000
#define BOARD_MAP_NAME "Db1000 Flash"
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_DB1500
#define BOARD_MAP_NAME "Db1500 Flash"
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_DB1100
#define BOARD_MAP_NAME "Db1100 Flash"
#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_DB1550
#define BOARD_MAP_NAME "Db1550 Flash"
#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#endif
#ifdef CONFIG_MIPS_DB1200
#define BOARD_MAP_NAME "Db1200 Flash"
#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
#define BOARD_FLASH_WIDTH 2 /* 16-bits */
#endif
#ifdef CONFIG_MIPS_BOSPORUS
#define BOARD_MAP_NAME "Bosporus Flash"
#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
#define BOARD_FLASH_WIDTH 2 /* 16-bits */
#endif
#ifdef CONFIG_MIPS_MIRAGE
#define BOARD_MAP_NAME "Mirage Flash"
#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
#define BOARD_FLASH_WIDTH 4 /* 32-bits */
#define USE_LOCAL_ACCESSORS /* why? */
#endif
static struct map_info alchemy_map = {
.name = BOARD_MAP_NAME,
};
static struct mtd_partition alchemy_partitions[] = {
{
.name = "User FS",
.size = BOARD_FLASH_SIZE - 0x00400000,
.offset = 0x0000000
},{
.name = "YAMON",
.size = 0x0100000,
.offset = MTDPART_OFS_APPEND,
.mask_flags = MTD_WRITEABLE
},{
.name = "raw kernel",
.size = (0x300000 - 0x40000), /* last 256KB is yamon env */
.offset = MTDPART_OFS_APPEND,
}
};
static struct mtd_info *mymtd;
static int __init alchemy_mtd_init(void)
{
struct mtd_partition *parts;
int nb_parts = 0;
unsigned long window_addr;
unsigned long window_size;
/* Default flash buswidth */
alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
window_addr = 0x20000000 - BOARD_FLASH_SIZE;
window_size = BOARD_FLASH_SIZE;
/*
* Static partition definition selection
*/
parts = alchemy_partitions;
nb_parts = ARRAY_SIZE(alchemy_partitions);
alchemy_map.size = window_size;
/*
* Now let's probe for the actual flash. Do it here since
* specific machine settings might have been set above.
*/
printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
alchemy_map.bankwidth*8);
alchemy_map.virt = ioremap(window_addr, window_size);
mymtd = do_map_probe("cfi_probe", &alchemy_map);
if (!mymtd) {
iounmap(alchemy_map.virt);
return -ENXIO;
}
mymtd->owner = THIS_MODULE;
add_mtd_partitions(mymtd, parts, nb_parts);
return 0;
}
static void __exit alchemy_mtd_cleanup(void)
{
if (mymtd) {
del_mtd_partitions(mymtd);
map_destroy(mymtd);
iounmap(alchemy_map.virt);
}
}
module_init(alchemy_mtd_init);
module_exit(alchemy_mtd_cleanup);
MODULE_AUTHOR("Embedded Alley Solutions, Inc");
MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver");
MODULE_LICENSE("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment